Rocket Fish RF-G1182 User manual

Cable/Satellite
Box
OR
Blu-ray
Player
Game
Console
Back
Power LED
HDMI IN
DC power
5V/1A
HDMI OUT 1
HDMI OUT 2
Package contents
• HDMI splitter
• AC power adapter
• Quick Setup Guide
You will need:
• High-speed HDMI cables,
such as Rocketsh,
available in 6' - 24' lengths.
Features
• Sends HDMI A/V signals from a single source,
such as a Blu-ray/DVD player or set-top box to
two destinations, such as a TV and A/V receiver
• Supports full 1080p video resolution
• Supports 3D video
• Compatible with most TV and PC monitor
video resolutions
• Gold-plated connectors for maximum signal
transfer and corrosion resistance
• Supports HDMI CEC commands for remote
control functionality
NOTE: If you want to watch 3D sources, make sure that your TV or projector supports the same HDMI 3D video
format as your sources. A 3D image cannot be delivered to a TV or projector that does not support 3D video formats.
You also need to use HDMI cables that are compatible with 3D video, such as Rocketsh high-speed HDMI cables.
Front
HDMI splitter basics
This Rocketsh two-way HDMI splitter will send HDMI audio and video signals
from a single source, such as a Blu-ray/DVD player or cable/satellite box, to two
destinations, such as a TV and A/V receiver. It is ideal for sending audio signals
from a 3D Blu-ray player to an A/V receiver that does not support 3D video
pass-through, and a 3D TV.
TM
Setting up your HDMI splitter
1 Connect one end of a high-speed HDMI cable (not included) to your video
source and the other end to the IN port on the HDMI splitter.
2 Connect one end of another high-speed HDMI cable to your HDMI splitter’s
OUT 1 port, then connect the other end of the HDMI cable to the IN port of a
destination component, such as an A/V receiver, projector, or HDTV.*
3 Connect one end of another high-speed HDMI cable to your HDMI splitter’s
OUT 2 port, then connect the other end of the HDMI cable to the IN port of
another destination component, such as an A/V receiver, projector, or HDTV.
4 Connect the included AC adapter to the DC jack on the HDMI splitter and a
standard 110/120V AC outlet. The LED indicator lights green. Turn on all
connected devices and operate.
IN OUT1 OUT2 5V 1A
Connecting 1 component to AV receiver and display
Projector
Connecting 1 component to 2 displays
DC connector
IN OUT1 OUT2 5V 1A
HD TV AV Receiver
HD TV
HDMI
HDMI
HDMI
HDMI
HDMI
HDMI
DC connector
IN OUT1 OUT2 5V 1A
QUICK SETUP GUIDE
RF-G1182, 2-way HDMI Splitter
Cable/Satellite
Box
OR
Blu-ray
Player
Game
Console
*When connecting one source device to two displays, make sure the display with the lowest resolution capability is
connected to OUT 1 on the splitter. When connecting one source device to one display and an A/V receiver, make
sure the display is connected to OUT 1 on the splitter. The splitter recognizes the EDID (extended display
identication data) from the display connected to OUT 1.

1 Make sure that the HDMI splitter’s power adapter is plugged in.
One-year limited warranty
Visit www.rocketshproducts.com for details.
Contact Rocketsh:
For customer service call 1-800-620-2790
www.rocketshproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN 55423-3645 USA
© 2012BBY Solutions, Inc., All Rights Reserved. ROCKETFISH is a
trademark of BBY Solutions, Inc.
All other products and brand names are trademarks of their
respective owners.
Troubleshooting
ENGLISH 11-1156
LED is not on or lit
Symptom Possible solution
No video
and/or audio
Video has
some noise
When one device
destination is
turned off, the
other loses signal.
Specications
1When connecting one source device to a display and AVR,
make sure the display is connected to OUT 1 and the AVR is
connected to OUT 2.
2 When connecting one source device to two displays, make
sure that the destination component with the lowest
resolution is connected to the OUT 1 port to make sure video
is displayed. The splitter uses the resolution, timing
information, and audio formats of the destination
component with the lowest resolution for both destination
components.
3 Make sure that the audio and video formats of the content
being used (such as Blu-ray disc) are supported by all
connected devices.
4 Make sure that your destination components (such as TV and
A/V) receiver are set to the HDMI inputs with which the
splitter’s HDMI outputs are connected.
5 Make sure that you are using high-speed HDMI cables for
all connections.
6 Unplug the HDMI splitter’s AC power adapter, then plug it
back in again.
1 Make sure that you are using high-speed HDMI cables for all
connections.
2 Make sure that the TV’s video resolution supports the video
source’s output resolution.
3 Make sure that the destination component with the lowest
resolution is connected to the OUT 1 port to make sure video
is displayed. The splitter uses the resolution, timing
information, and audio formats of the destination
component with the lowest resolution for both components.
1 If you prefer the option of turning off individual devices
independent of one another, make sure the CEC function is
disabled on all the connected devices. See the user guide
supplied by the device manufacturer for more information
about CEC commands.
HDMI version 1.4A
Video amplier bandwidth 225MHz / 6.75 Gbps
Resolutions supported 480i to 1080p from source device
Vertical frequency range 25Hz to 60Hz
HDMI input connector HDMI Type A (1)
HDMI output connector HDMI Type A (2)
HDMI HDCP compliant Pass HDCP data between source and monitor
Power 5 VDC / 1000 mA (5 W max)
Dimensions 5.19 × 3.39 × 0.98 in. (130 × 86 × 25 mm)
Shipping weight .82 lb. (.372 kg)