Rockler Dust Right 52981 User manual

1
Lathe Dust Collection
System Instructions
Dust RIGHT®
Quantity
1 Dust Scoop 1
2 Port Boom Arm 1
3 Post 1
4 Adjustable Connection Plate 1
5 Stepped Plate 1
6 21⁄2" FlexForm™Dust Hose 1
7 Hose Clamp 1
8 3-Star Knob with 11⁄2" Bolt 1
9 3/8"-16 x 1" Screw 1
10 Rubber Washer 1
11 3-Star Knob with Threaded Insert 1
12 3-Star Knob with 5/8" Bolt and Nylon Tip 1
13 Plastic Washer 2
PARTS LIST - LATHE DUST COLLECTION SYSTEM
To mount, place the Stepped Plate (5) under the lathe
bed at a spot that will allow you to slide it into nal
position. Place the Adjustable Connection Plate (4)
above it and thread the 3-Star Knob with 11⁄2" Bolt (8)
into the Stepped Plate (5).
10
11
1
2
12 13 13
6
7
4
9
3
8
5

2Distributed by Rockler Companies, Inc.
©2015 Rockler Woodworking and Hardware
52981
Rev 08/15
Turning
Position the bottom edge of the Dust Scoop against the lathe tool
rest. This helps channel the suction for maximum dust removal.
Important Safety Instructions
1. This tool is designed for specific applications as defined in
the instructions and should not be modified and/or used for
any other applications.
2. Before using the Rockler Dust Right Lathe Dust Collection
System read, understand and follow all instructions and safety
information provided.
3. For any tool that is used in conjunction with this product always
read, understand and follow the instructions and safety warnings
for that tool
4. Before using this product, review and verify that all tools used
  withitareinproperworkingorderasdefinedbythetool’s
  owner’smanual.
5. All safety equipment must be installed and working properly
  asdefinedbythetool’sowner’smanual.
6. Do not use this product until you have read the provided
instructions and warnings and are confident you understand them.
7. Always wear safety glasses in compliance with ANSI safety
standards and hearing protection and follow all standard shop
safety practices including:
A. Keep your work area well lit and clean.
B. Use dust collection tools and dust face masks to reduce
exposure to dust.
C. Keep children and bystanders away while operating your tools.
D. Maintain proper footing at all times and do not overreach.
E. Do not force the tool.
F. Unplug all power tools before making any adjustments
or changing accessories.
8. Remain alert and use good judgment when using this tool. Do
not use this tool if you are in any way impaired by medications,
alcohol, drugs or fatigue.
9. Dress appropriately and remove all jewelry, secure loose clothing
and tie up long hair before using this tool.
10. It is the sole responsibility of the purchaser of this tool to ensure
that any third party reads and agrees to all the safety precautions
outlined in this manual prior to using the tool.
11. Maintain these instructions and warnings as long as you own
the tool. Keep in a place where they will be readily available
for reference.
12. The user assumes all risk for the proper use of this tool and for
ensuring product suitability for intended application.
13. These warnings and instructions do not represent the total of all
information available regarding tool safety, use and technique.
Always seek out opportunities to learn more and improve your
skills and knowledge.
14. Before turning on the lathe, verify that all of the Lathe Dust
Collection System components are installed properly and
are securely tightened.
15. With the lathe off, hand-spin your workpiece to ensure that it
will not come into contact with any part of the Lathe Dust
Collection System.
16. While sanding, the lathe tool rest must be removed.
17. While sanding, keep the Dust Scoop in the sanding position (Dust
Scoop is tilted vertically – i.e., not surrounding the workpiece but
behind it) to prevent finger entrapment.
18. Always use sharp tools and practice proper
woodturning technique.
19. Use the appropriate lathe speed for the work being done, as
defined by your lathe manufacturer.
20. Be aware that, with your dust collection unit on, sand paper or
rags may be drawn toward the Dust Scoop. Maintain awareness
and use a secure grip.
003
Sanding
Reposition the Dust Scoop to ensure your fingers won’t get
trapped between it and the workpiece.
Check Rockler.com for updates. If you have further questions,
please contact our Technical Support Department at
1-800-260-9663 or [e-mail]