Rohnson R-8100 User manual

Tower fan & air purifier
Model: R-8100
Instruction Manual
** Scan with your phone or QR reader to find out more about your machine
Please read these instructions and warranty information carefully
before use and keep them handy for future reference.

SAFETY WARNING
1. To avoid fire, electric shock, and injury, you must meet the following
requirements.
2. Otherwise, please follow the respective national and local electricity
regulations.
3. This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory, or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved.
4. Children shall not play with the appliance.
5. Cleaning and user maintenance shall not be made by children without
supervision.
6. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
7. Please use a separate outlet according to the current / voltage of the fan.
8. Do not use a multi-purpose socket for simultaneous use with other electrical
devices.
9. If the fan does not work due to a damaged power cord, turn off the power
and ask a qualified person for repair.
10.Do not move the fan when you pull the plug out of the socket.
11.Do not pull out the plug by the cable. Pull out the plug and do not grip the
cable.
12.Do not operate the fan with a damaged cable or connector. Please contact
customer service to replace or repair the cable if the cable is damaged.
13.Do not stretch or energize the cable. Keep the cable away from the heat
source.
14.Do not run the cable under carpets, do not cover it with carpets or similar
covers. Route the cable outside the traffic area to avoid tripping the cable.
15.Turn off all controls before pulling the plug and pull the plug out of the socket
if you are not going to use the device for a long time.
16.Do not place any objects on the air inlet or outlet. Make sure that the
ventilation openings are free of dust, lint,hair and other obstacles that could
impair the air flow.
17.The fan should be set up dry on a horizontal platform and should not be
near heat sources, corrosive air and moisture. The fan should be kept a
distance of 150 mm around to ensure good air circulation.
18.Do not use the fan outdoors or on a wet surface.
19.Do not immerse the fan, power cord, or plug in water or other liquids to avoid
danger. The use of an extension cord is not recommended unless it has
been tested by a qualified person.
20.Please do not use an air cleaner or similar product right next to the fan.
21.Do not use any cleaning agents or lubricants for this fan and pull out the
power plug before cleaning, transporting and servicing the device.

SPECIFICATION
• Model: PB-F12
• Fan: DC 24V , 35W, 1.5A
• Adaptor Input: 100-240V~, 50/60Hz
• Adapter Output: DC 24V , 35W
• Product Dimensions: 235x235x810mm
PARTS
The Main Body:
1. Air Duct
2. Air Outlet
3. LED Display
4. Top Cover
5. Air Inlet
6. Base
7. Air Duct
8. Top Cover
9. Air Inlet
10. Body
11. Socket for adapter
The Adapter:
12. Removable Panel
13. Connector
14. Main Body
15. Cord

LOCATION
1. Please put this product on a level surface. Avoid putting it on an unstable
surface (such as a slanted or soft surface) to prevent it from falling over.
Please do not use it in hot and humid areas (such as bathroom and kitchen).
2. Avoid blocking the Air Inlet and Air Outlet when product is in use. Please
keep the product far away from curtains, so that they will not block the
Inlet/Outlet and obstruct the product from working properly.
3. DO NOT place objects within 1 meter in front of the Air Outlet to ensure that
the air flow would not be reduced.
BATTERY REPLACEMENT
1. Please remove the insulation sheet before using the remote control.
2. Battery replacement method: as shown in the picture. Please note the
battery direction.
Place away
from curtains

Caution:
1. If Remote Control will not be used for a prolonged period of time, please
remove the battery.
2. This battery is not rechargeable. DO NOT recharge the battery.
3. The Remote Control and battery are not toys. Please keep them out of
children’s reach.
4. If accidentally swallow battery, please seek medical attention immediately.
OPERATION
Main Body
Air Duct Angle Setting
Before adjusting the air duct angle, please make sure the product is turned
off. Hold
product body with one hand and set the air duct 15° forward or backward.
Switch ON and OFF
1. Connect to power source, and product will enter into Standby Mode.
2. Press On/Off , the buzzer will beep once, and product will start to
operate.
3. Press On/Off , repeatedly to adjust air volume.
4. To turn off the product, press On/Off for 2 seconds. The buzzer will
beep twice and product will shut down.

LED Display
LED Display Icon
Icon
Description
On/Off Button
• Press to turn product on.
• Press repeatedly to adjust air volume.
• Press 1 second to turn on oscillation on and off.
• Press 2 second to turn off product.
Filter Replacement Alert Indicator Light
After a total of 2100 hours of operation, will light up,
indicating the filter needs to be replaced. After the filter has
been replaced,long-press on the Remote Control for 5
seconds, will turn off, and product will enter a new 2100
hour cycle.
UV-C Disinfection Indicator
When UV-C Disinfection Function is turned on via the
Remote
Filter Replacement Alert
Indicator
Temperature Display
AUTO mode
Settings & Humidity Display
On/Off
UVC
Sterilization
Plasma
Purification

Control, will light up. UV-C will automatically turn off
after 1 hour.
Plasma Purification Indicator
When Plasma Purification is turned on via the Remote
control, will light up.
AUTO
Auto Mode: If the appliance is in Auto Mode, this indicator
will light on
Temperature Display
Cool Air Mode, display will light up in white.
Settings & Humidity Display
This indicates the current setting and humidity level.
Attention! The filter cannot be washed. Filter has to be replaced after a total
of 2100 hours of operation, or if it dirty.
Remote Control
Note:
The Remote Control should be pointed directly at the Remote Control Signal
Receiver on the Display Panel to maximize remote control reception.
UVC Sterilization
Timer Mode
Air volume -
Plasma Purification
MODES
On/Off
Oscillation
Air volume +
AUTO

Remote Control Function
Function
Button
Description
On/Off
• In Standby Mode, press once to turn on product.
• When product is operating, press once and product
will turn off and return to Standby Mode.
MODES
• Press this button to choose sleep mode,Natural
mode,Max mode
• Sleep mode:the digital display will show “LL” and
the wind speed becomes minimum.
• Natural mode:the digital display will show “--” and
the wind speed will be changed among speed 3-4-5.
• Max mode:the digital display will show “HH” and
the wind speed becomes maximum.
Oscillation
• Press once to turn on Oscillation Function,
oscillation
angle is 80°.
• Press again to turn off Oscillation Function.
Timer
Mode
• Press this button to set Countdown To Turn Off
Time
(1-8 hr). When countdown completes, the product
will
automatically stop operating.
UV-C
Sterilization
• Press once to turn on UV-C Sterilization Function.
• Press again to turn off UV-C Sterilization Function
(UV Sterilization Function will automatically
turn off after operating for 1 hr).
Plasma
Purification
• Press once to turn on Plasma purification Function
• Press again to turn off Plasma purification Function
• Plasma can clean and sterilize the room air
Auto
Mode
• Press the Auto Mode Button to set the appliance
into Auto Mode. The fan speed will adjust itself
according to the temperature of the room.
Air volume
+
• Press + to increase airflow.
• Fan has 9 levels of airflow.
Air volume -
• Press + to decrease airflow.
• Fan has 9 levels of airflow.

Attention!
When operating this product, the following phenomena may occur:
1. This product may respond to the remote control of other devices.
2. Other products may respond to this Remote Control. This is due to
overlapping frequencies of the remote controls. There is no quality problem in
the product itself. To avoid interference, keep this Remote Control away from
other electrical devices during operation.
3. The On/Off button on the Remote Control does not completely disconnect
the power supply to this product. If product will be unused for a prolonged
period of time, please unplug the power cord from the socket.
CLEANING & MAINTENANCE
WARNING! Unplug the power supply before performing maintenance.
Filter Replacement
1. Lift out Top Cover. 2. Lift out the old air filter.

3. Install new filter into the main body
of the product.
Product Surface
• When cleaning the product, do not wet or splash water on the product, to
avoid water entering inside and causing malfunction.
• Do not use banana oil, benzine, alcohol, bleach or metal objects to wipe the
surface of the product, which may damage the surface or cause discoloration.
• Please use soft dry cloth to lightly wipe the surface of the product.
• If the surface is very dirty, use a soft cloth and diluted mild detergent to
clean, then wipe dry with a soft dry cloth.
Air Inlet & Air Outlet
Use a soft brush or vacuum cleaner to regularly clean off any dust
accumulated on the Air Inlet and Outlet. Do not let dust build up as too much
dust will reduce the efficiency of the product.
4. the magnetic lid will snap into place
automatically.

Remote Control
Gently wipe the surface of the Remote Control with a soft dry cloth. If the
Remote Control will not be used for a prolonged period of time, please
remove the battery inside to avoid battery consumption.
Power Plug
Use soft dry cloth to clean the power plug.
STORAGE
• After cleaning the product, put in plastic bag and store away.
• Please avoid storing in a place with vibration (car trunk) or a place heated or
cooled by another appliance.
• Please avoid placing it in direct sunlight or in a hot and humid environment.
• Please keep this product out of reach of young children.
TECHNICAL SPECIFICATION
Model
R-8100
Rated Voltage/Frequency
220-240V~ / 50-60Hz
Rated Power
35W
Product Dimensions
(H)815 (W)255 (D)255 mm

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste.
It must be taken to a special local authority differentiated waste collection
centre or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences for the
environment and health, deriving form inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin.