- 4 -
appliance is running. Only the pusher is to be used for this purpose.
11.Never let the appliance run unattended.
12.Switch the appliance off before detaching and install any accessory.
13.Wait until moving parts have stopped running before you remove the parts of the
appliance.
14.Never immerse the motor unit in the water or any other liquid, nor rinse it under the tap.
Use only a moist cloth to clean the motor unit.
15.Do not attempt to grind bones, nuts or other hard items.
16.Never reach into the cutter housing. Always use the pusher.
17.Accessories shall include instructions for their safe use.
18.It shall warn of potential injury from misuse.
19.This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been give supervision or instruction concerning use of the appliance by a
person responsible for their safety.
20.If the appliance is locked, please press Reversal button(REV). The meat locked in cutter
housing is untrodden, so the appliance can renew its usual condition.
21.After the implementation of the European Directive 2002/96/EU in the national legal
system, the followi ng applies:
ASSEMBLING
1. Place the plastic snake into the head tube, long end first, and turn to feed the snake slightly until it is
set into the motor housing.(fig.1)
2. Place the filter traps into the tube around to the plastic snake. (fig.1)
3. Place the plastic cover locking ring into the head tube.(fig.1)
4. Put the filter tip to the plastic cover and fix it.
5. Move the whole head tube clockwise so that it being fastened tightly.(fig.2)
6. Put the plastic juice tray on the top of head tube and make it on the suitable position.(fig.3)
7. Put the juice cup right near the filter tip, and a cup for tomato sediment.(fig.3)
Now the appliance is ready for juicing.