Rokenbok Young Engineer Start Set User manual

77x 52x 38x 32x
19x 6x 8x 17x
4x 4x 28x
19x
2x 38x 4x
6x
1x
4x 160x 20x
1x
20x
2x6x 2x
1x 2x 8x
12x
1x 1x 1x
4x
1x
1x 1x 1x
34x 114x
13x 12x 16x 8x
7x 12x
34x 3x 37x 11x
Color of building pieces may differ from those shown.
2x
drawbridge pg. 1
elevator pg. 8
gantry crane pg. 21
gear crane pg. 32

• Rokenbok recommends premium alkaline batteries
for use in your Rokenbok machines.
• Batteries are to be inserted with correct polarity as shown.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc),
or nickel-cadmium batteries.
1. Insert one end of the “knotted” string
into the notch on the Winch Spool.
(see diagram)
2. Power on the X2 machine. Using your
ROK Star Controller, press the red “R”
select button while pointing at the receiver
on the X2 machine. When you have
selected the X2 machine, hold down the
“B” button on your ROK Star Controller
and feed the string onto the X2 spool until
about six inches of the string remains
unspooled. (see diagram)
3. Guide the remaining end of the string
up through the hole in the cable guide
as shown. (see diagram)
Receiver
Feeding string onto X2:
+
2
1
3

1
BILL OF MATERIALS

2
1
2

3
3
4

4
5
6

5
7
8

6
9
10

7
Final ASSEMBLY:
Assembling the winch string to the drawbdige.
Tip: To let additional string out press the “A”
button on your ROK Star Controller.
1. Guide the string from the winch cable guide
over the pulley marked “B”.
2. Guide the string through the pulley marked “C”.
3. Guide the string over the pulley marked “D”.
4. Guide the string over the pulley marked “E”,
and tie it to the final pulley.
B. C.
D.
E.
A.

8
BILL OF MATERIALS
Bill of materials

9
1 2

10
3 4

11
5 6

12
7
8

13
9 10
Slide into place.

14
11
12

15
13
14

16
15 16

17
17
18