Roland Camm-1 GR2-640 User manual

• Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe locaon.
• Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• The specicaons of this product and the contents of this operaon manual are subject to change without
noce.
• This manual and the product have been prepared and tested as much as possible. If you nd any misprints or
errors, please inform Roland DG Corporaon.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur
through use of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corporaon assumes no responsibility for any direct or indirect loss or damage that may occur with
respect to any arcle made using this product.
R2-210707TW
Setup Guide
Ax voucher code here

For the USA
FEDERAL COMMUNICATIONS
COMMISSION RADIO FREQUENCY
INTERFERENCE STATEMENT
Responsible Party : Roland DGA Corporation
Address : 15363 Barranca Parkway Irvine, CA 92618 U.S.A.
Telephone : [phone]
Type of Equipment :Cutting Machine
Model Name :GR2-640, GR2-540
NOTE:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
FCC CAUTION
Changes or modications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Use only I/O cables that have been designed and
manufactured specically for this device.
For Canada
CAN ICES-3 (A)/NMB-3(A)
For California
WARNING:This product can expose you to chemicals
including lead,which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
For EU Countries
WARNING
Operation of this equipment in a residential environment
could cause radio interference.
For EU Countries
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken,
431-2103 JAPAN
The importer in the EU:
Roland DG Europe Holdings B.V.
Prof. J.H. Bavincklaan 2, 1183 AT, Amstelveen, The Netherlands
For UK
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken,
431-2103 JAPAN
The importer in the UK:
Roland DG (U.K.) Ltd.
Grin House, Windmill Road, Clevedon Business Park,
Clevedon, North Somerset, BS21 6UJ, United Kingdom
NOTICE
Grounding Instructions
• In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped with an
electric cord having an equipment-grounding conductor and
a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
• Do not modify the plug provided - if it will not t the outlet,
have the proper outlet installed by a qualied electrician.
• Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. The conductor with
insulation having an outer surface that is green with
or without yellow stripes is the equipment-grounding
conductor. If repair or replacement of the electric cord or
plug is necessary, do not connect the equipment-grounding
conductor to a live terminal.
• Check with a qualied electrician or service personnel if the
grounding instructions are not completely understood, or if
in doubt as to whether the tool is properly grounded.
• Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the tool’s plug.
• Repair or replace damaged or worn cord immediately.

1
Contents
Contents ......................................................................................................... 1
To Ensure Safe Use.......................................................................................... 3
Pour uliser en toute sécurité ........................................................................ 8
1. Introducon ...............................................................................................15
1. Checks before Installaon ....................................................................... 16
About the User's Manuals for This Machine ............................................................. 16
Deciding On an Installaon Site................................................................................. 17
Temperature and Humidity ....................................................................................... 18
Installaon Space ...................................................................................................... 18
2. Included Items......................................................................................... 19
2. Installaon.................................................................................................21
1. Assembly ................................................................................................. 22
Checks before Operaons ......................................................................................... 22
Step 1: Assembling the Stand.................................................................................... 23
Step 2: Assembling the Machine and the Stand........................................................ 25
Step 3: Installing the Roll Holders.............................................................................. 26
Step 4: Removing the Retainers ................................................................................ 29
Step 5: Connecng the Cables................................................................................... 30
Step 6: Aaching a Cable Tie ..................................................................................... 31
2. Installing the Cung Tool ........................................................................ 32
Step 1: Assembling the Cung Tool .......................................................................... 32
Step 2: Installing the Cung Tool .............................................................................. 33
3. Preparaons before Use.......................................................................... 34
Seng the Display Language..................................................................................... 34
Conrming System Requirements ............................................................................. 34
3. Appendix....................................................................................................35
Locaon of the Power Rang and Serial Number Label ............................... 36
Specicaons................................................................................................ 37
Companynamesandproductnamesaretrademarksorregisteredtrademarksoftheirrespecveholders.
Copyright © 2021 Roland DG Corporaon
ThisdocumentisthesetupguidefortheGR2-640/540.Thisdocumentusesthefollowingnotaonstodisnguish
between the models where necessary.
GR2-640 — 64-inch model
GR2-540 — 54-inch model
MostoftheguresinthisdocumentdepicttheGR2-640.
hp://www.rolanddg.com/

2
For China
产品中有毒有害物质或元素的名称及含量
部件名称
有毒有害物质或元素
铅(Pb) 汞(Hg) 镉(Cd) 六价铬
(Cr(Ⅵ))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板 × ○○○○○
头部 × ○○○○○
壳体、底架 × ○○○○○
电源 × ○○○○○
其他（电缆、附件等） × ○○○○○
○：表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下。
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求。
环保使用期限
此标志适用于在中国国内销售的电子信息产品，表示环保使用期限的年数。
所谓环保使用期限是指在自制造日起的规定期限内，产品中所含的有害物质
不致引起环境污染，不会对人身、财产造成严重的不良影响。
环保使用期限仅在遵照产品使用说明书，正确使用产品的条件下才有效。
不当的使用，将会导致有害物质泄漏的危险。
For EU countries
This product must be disposed of
separately at your local waste recycling
center. Do not dispose of in household
waste bin.
Bitte führen Sie dieses Produkt separat
Ihrer örtlichen Entsorgungsstelle zu.
Bitte nicht mit dem normalen Hausmüll
entsorgen.
Ne jetez pas le produit avec vos
ordures ménagères. Portez-le dans un
centre recyclage des déchets.
Questo prodotto deve essere smaltito
negli appositi contenitori per la raccolta
differenziata, non buttare nel cestino
dei rifiuti casalinghi.
Este producto debe devolverse al
centro de reciclaje más cercano a su
domicilio para su correcta eliminación.
No lo tire a la basura.
Deite fora separadamente este produto
no seu centro de reciclagem local. Não
o deite fora no seu caixote do lixo.
Lever dit product in bij een lokaal
afvalverzamelpunt. NIET met normaal
huishoudelijk afval afvoeren.
Dette Produkt skal smides særskilt
væk på den lokale affalds- og
genbrugsstation. Må ikke smides ud
sammen med almindeligt
husholdningsaffald.
Tätä tuotetta ei saa hävittää
normaalien talousjätteiden mukana,
vaan se on toimitettava
ongelmajätteiden keräilypisteeseen
hävitettäväksi.
Produkten måste kasseras separat på
din lokala återvinningscentral. Släng
inte produkten tillsammans med
hushållssoporna.
Μην πετάξετε το αντικείμενο αυτό στο
καλάθι των απορριμμάτων. Αφαιρέστε
τις μπαταρίες και προσκομίστε το στο
τοπικό κέντρο ανακύκλωσης.

To Ensure Safe Use
Improper handling or operaon of this machine may result in injury or damage to property. Points
that must be observed to prevent such injury or damage are described as follows.
About WARNING and CAUTIONNoces
WARNING
Used for instrucons intended to alert the user to the risk of death or severe injury
should the unit be used improperly.
CAUTION
Used for instrucons intended to alert the user to the risk of injury or material damage
should the unit be used improperly.
*Material damage refers to damage or other adverse eects caused with respect to the
home and all its furnishings as well as to domesc animals or pets.
About the Symbols
The symbol alerts the user to important instrucons or warnings.
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at le means "danger of electrical shock."
The symbol alerts the user to items that must never be carried out (are forbidden).
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at le means the unit must never be disassembled.
The symbol alerts the user to things that must be carried out.
The specic meaning of the symbol is determined by the design contained within the
symbol.
The symbol at le means the power-cord plug must be unplugged from the outlet.
3

WARNING
Besuretofollowtheoperaonproce-
dures described in the user's manual.
Neverallowanyoneunfamiliarwiththe
usage or handling of the machine to
touch it.
Incorrect usage or handling may lead to an
accident.
Keep children away from the machine.
The machine includes areas and compo-
nents that pose a hazard to children and
may result in injury, blindness, choking, or
other serious accident.
Neveroperatethemachinewhileredor
aeringesngalcoholoranymedicaon.
Operaon requires unimpaired judgment.
Operang with impaired judgment may
result in an accident.
Always unplug the power cord when
aachingorremovingpartsandoponal
parts and when performing cleaning or
maintenance that does not require the ma-
chine to be connected to a power source.
Aempng such operaons while the ma-
chine is connected to a power source may
result in injury or electrical shock.
Neveraempttodisassemble,repair,or
modify the machine.
Doing so may result in re, electrical shock,
or injury. Entrust repairs to a trained ser-
vice technician.
CAUTION
Exercisecauontoavoidbeingpinched
or becoming caught.
Inadvertent contact with certain areas
may cause the hand or ngers to be
pinched or become caught. Use care when
performing operaons.
Neveraemptoperaonwhilewearing
anecke,necklace,looseclothing,or
gloves.Bindlonghairsecurely.
Such items may become caught in the
machine, resulng in injury.
Conductoperaonsinaclean,brightly
litlocaon.
Working in a locaon that is dark or
cluered may lead to an accident, such as
becoming caught in the machine as the
result of an inadvertent stumble.
Neverclimborleanonthemachine.
The machine is not made to support a per-
son. Climbing or leaning on the machine
may dislodge components and cause a slip
or fall, resulng in injury.
Cauon:cungtool.
This machine has a cung tool. To avoid
injury, handle the tool with care.
This is a heavy machine.
WARNING
Be sure to lock the stand's casters.
If the machine should begin to topple, a
major accident may result, including crush-
ing of the parts of your body.
Whenstoringrollmedia,implementade-
quate safety measures to ensure that the
storedmediawillnotroll,fall,ortoppleover.
Danger exists of becoming pinned under
the media and suering serious injury.
Handlingrollmediaisanoperaonthat
mustbeperformedbytwopersonsormore,
andcaremustbetakentopreventfalls.
Aempng manual liing of heavy media
that taxes your strength may cause physi-
cal injury. Also, if dropped, such items may
cause injury.
CAUTION
Unloading and emplacement are oper-
aonsthatmustbeperformedbyfour
persons or more.
Tasks that require undue eort when per-
formed by a small number of persons may
result in physical injury. Also, if dropped,
such items may cause injury.
Installinalevelandstablelocaon.
Failure to do so may result in falling of the
machine, leading to injury.
Incorrect operation may cause injury
To Ensure Safe Use
4

WARNING
Connect to an electrical outlet that
complieswiththismachine'srangs(for
voltage,frequency,andcurrent).
Incorrect voltage or insucient current
may cause re or electrical shock.
Neveruseoutsideorinanylocaon
where exposure to water or high humid-
ity may occur. Do not touch the power
cord,plug,orelectricaloutletwithwet
hands.
Doing so may result in re or electrical
shock.
Neverallowanyforeignobjecttogetin-
side.Neverexposethemachinetoliquid
spills.
Inserng objects such as coins or matches
or allowing beverages to be spilled into
the venlaon ports may result in re or
electrical shock. If anything gets inside,
immediately disconnect the power cord
and contact your authorized Roland DG
Corporaon dealer.
Neverplaceanyammableobject
nearby.Neveruseacombusbleaerosol
spraynearby.Neveruseinanylocaon
where gases can accumulate.
Combuson or explosion could occur.
Handlethepowercord,plug,andelectri-
caloutletcorrectlyandwithcare.Never
useanyarclethatisdamaged.
Using a damaged arcle may result in re
or electrical shock.
When using an extension cord or power
strip,useonethatadequatelysases
themachine'srangs(forvoltage,fre-
quency,andcurrent).
Use of mulple electrical loads on a single
electrical outlet or of a lengthy extension
cord may cause re.
Connect to ground.
This can prevent re or electrical shock
due to current leakage in the event of
malfuncon.
WARNING
Posionsothatthepowerplugiswithin
immediatereachatallmes.
This is to enable quick disconnecon of the
power plug in the event of an emergency.
Install the machine next to an electrical
outlet. Also, provide enough empty space
to allow immediate access to the electrical
outlet.
Ifsparks,smoke,burningodors,unusual
sounds,orabnormaloperaonoccur,im-
mediatelyunplugthepowercord.Never
use if any component is damaged.
Connuing to use the machine may result
in re, electrical shock, or injury. Contact
your authorized Roland DG Corporaon
dealer.
Do not use the supplied power cord for
other products.
Neverusethemachineforanypurpose
forwhichitisnotintended,orusethe
machineinanexcessivemannerthat
exceeds its capacity.
Doing so may result in injury or re.
Foraccessories(oponalandconsum-
ableitems,powercord,andthelike),use
onlygenuinearclescompablewith
this machine.
Incompable items may lead to an acci-
dent.
If the machine will not be used for a long
period,disconnectthepowercord.
This prevents an accident caused by un-
expected electric leakage or unintenonal
start of the machine.
Danger of electrical short, electrical shock, or re
To Ensure Safe Use
5

Neverplaceanyobjectontopor
subjecttodamage.
Neverallowtogetwet. Neverbendortwistwithexcessive
force.
Nevermakehot. Neverpullwithexcessiveforce. Dustmaycausere.
Neverbundle,bind,orrollup.
Important notes about the power cord, plug, and electrical outlet
To Ensure Safe Use
6

Warning Label
A warning label is axed to the machine to make areas of danger immediately clear. The meaning of
this label is indicated below. Be sure to heed this warning. Also, never remove the label or allow it to
become dirty.
Cauon:MovingPrintHeadCarriage
The cung carriage is dangerous because it moves at high
speed. Do not put your hands near it.
Cauon:EntanglementHazard
Never inadvertently allow hands, hair, clothing
such as neckes, or the like near rotang parts
while in operaon.
To Ensure Safe Use
7

8
Pour utiliser en toute sécurité
La manipulaon ou l’ulisaon inadéquates de cet appareil peuvent causer des blessures ou des
dommages matériels. Les précauons à prendre pour prévenir les blessures ou les dommages sont
décrites ci-dessous.
Àproposdesavis ATTENTION et PRUDENCE
ATTENTION
Ulisé pour averr l’ulisateur d’un risque de décès ou de blessure grave en cas de mau-
vaise ulisaon de l’appareil.
PRUDENCE
Ulisé pour averr l’ulisateur d’un risque de blessure ou de dommage matériel en cas
de mauvaise ulisaon de l’appareil.
* Par dommage matériel, il est entendu dommage ou tout autre eet indésirable sur la
maison, tous les meubles et même les animaux domesques.
À propos des symboles
Le symbole are l’aenon de l’ulisateur sur les instrucons importantes ou les
averssements.
Le sens précis du symbole est déterminé par le dessin à l’intérieur du symbole .
Le symbole à gauche signie « danger d’électrocuon ».
Le symbole avert l’ulisateur de ce qu’il ne doit pas faire, ce qui est interdit.
Le sens précis du symbole est déterminé par le dessin à l'intérieur du symbole .
Le symbole à gauche signie que l’appareil ne doit jamais être démonté.
Le symbole prévient l’ulisateur sur ce qu’il doit faire.
Le sens précis du symbole est déterminé par le dessin à l'intérieur du symbole .
Le symbole à gauche signie que le l électrique doit être débranché de la prise.