Roland Edirol MA-15D User manual

Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (pp. 3–4), and “IMPORTANT
NOTES” (p. 5). These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a good
grasp of every feature provided by your new unit, Owner’s manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
202
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manuale d’uso
Manual del usuario
MA-15D_egfis.fm 1 ページ ２００５年１０月３１日 月曜日 午後７時１６分

2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.
NEUTRAL
LIVE
For the U.K.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
MA-15D_egfis.fm 2 ページ ２００５年１０月３１日 月曜日 午後７時１６分

3
USING THE UNIT SAFELY
001
• Before using this unit, make sure to read the instructions
below, and the Owner’s Manual.
..........................................................................................................
002a
• Do not open or perform any internal modifications on the
unit.
..........................................................................................................
003
• Do not attempt to repair the unit, or replace parts within
it (except when this manual provides specific instruc-
tions directing you to do so). Refer all servicing to your
retailer, the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
..........................................................................................................
004
• Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct sunlight
in an enclosed vehicle, near a heating duct, on top of
heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
007
• Make sure you always have the unit placed so it is level
and sure to remain stable. Never place it on stands that
could wobble, or on inclined surfaces.
..........................................................................................................
008a
• The unit should be connected to a power supply only of
the type described in the operating instructions, or as
marked on the rear side of unit.
..........................................................................................................
008e
• Use only the attached power-supply cord. Also, the
supplied power cord must not be used with any other
device.
..........................................................................................................
009
• Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits. Damaged
cords are fire and shock hazards!
..........................................................................................................
010
• This unit, either alone or in combination with an
amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a high
volume level, or at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should immediately
stop using the unit, and consult an audiologist.
..........................................................................................................
011
• Do not allow any objects (e.g., flammable material, coins,
pins); or liquids of any kind (water, soft drinks, etc.) to
penetrate the unit.
..........................................................................................................
012a
• Immediately turn the power off, remove the power cord
from the outlet, and request servicing by your retailer,
the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page when:
• The power-supply cord, or the plug has been damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been spilled onto the
unit; or
• The unit has been exposed to rain (or otherwise has become
wet); or
• The unit does not appear to operate normally or exhibits a
marked change in performance.
..........................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The ●symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
MA-15D_egfis.fm 3 ページ ２００５年１０月３１日 月曜日 午後７時１６分

4
013
• In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe operation of
the unit.
..........................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
015
• Do not force the unit’s power-supply cord to share an
outlet with an unreasonable number of other devices. Be
especially careful when using extension cords—the total
power used by all devices you have connected to the extension
cord’s outlet must never exceed the power rating (watts/
amperes) for the extension cord. Excessive loads can cause the
insulation on the cord to heat up and eventually melt through.
..........................................................................................................
016
• Before using the unit in a foreign country, consult with
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Infor-
mation” page.
..........................................................................................................
026
• Do not put anything that contains water (e.g., flower
vases) on this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the
unit. Swiftly wipe away any liquid that spills on the unit using a
dry, soft cloth.
..........................................................................................................
101a
• The unit should be located so that its location or position
does not interfere with its proper ventilation.
..........................................................................................................
102b
• Always grasp only the plug on the power-supply cord
when plugging into, or unplugging from, an outlet or
this unit.
..........................................................................................................
103a
• At regular intervals, you should unplug the power plug
and clean it by using a dry cloth to wipe all dust and
other accumulations away from its prongs. Also,
disconnect the power plug from the power outlet whenever the
unit is to remain unused for an extended period of time. Any
accumulation of dust between the power plug and the power
outlet can result in poor insulation and lead to fire.
..........................................................................................................
104
• Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed so
they are out of the reach of children.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on the
unit.
..........................................................................................................
107b
• Never handle the power cord or its plugs with wet hands
when plugging into, or unplugging from, an outlet or
this unit.
..........................................................................................................
108a
• Before moving the unit, disconnect the power plug from
the outlet, and pull out all cords from external devices.
..........................................................................................................
109a
• Before cleaning the unit, turn off the power and unplug
the power cord from the outlet.
..........................................................................................................
110a
• Whenever you suspect the possibility of lightning in
your area, pull the plug on the power cord out of the
outlet.
..........................................................................................................
118b-RE
• Take care not to allow children to swallow the included
rubber feet during handling. Also be sure to attach the
feet to the speakers' underside to protect the surfaces on
which they are placed.
..........................................................................................................
121
• Do not remove the speaker grille and speaker by any
means. Speaker not user replaceable. Shock hazardous
voltages and currents are present inside the enclosure.
..........................................................................................................
MA-15D_egfis.fm 4 ページ ２００５年１０月３１日 月曜日 午後７時１６分

5
IMPORTANT NOTES
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages
2–4, please read and observe the following:
Power Supply
301
• Do not connect this unit to same electrical outlet that is being
used by an electrical appliance that is controlled by an inverter
(such as a refrigerator, washing machine, microwave oven, or air
conditioner), or that contains a motor. Depending on the way in
which the electrical appliance is used, power supply noise may
cause this unit to malfunction or may produce audible noise. If it
is not practical to use a separate electrical outlet, connect a power
supply noise filter between this unit and the electrical outlet.
307
• Before connecting this unit to other devices, turn off the power to
all units. This will help prevent malfunctions and/or damage to
speakers or other devices.
308
• Although the LED is switched off when the POWER switch is
switched off, this does not mean that the unit has been
completely disconnected from the source of power. If you need to
turn off the power completely, first turn off the POWER switch,
then unplug the power cord from the power outlet. For this
reason, the outlet into which you choose to connect the power
cord's plug should be one that is within easy reach and readily
accessible.
Placement
351
• Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum. To
alleviate the problem, change the orientation of this unit; or move
it farther away from the source of interference.
352a
• This device may interfere with radio and television reception. Do
not use this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices, such
as cell phones, are operated in the vicinity of this unit. Such noise
could occur when receiving or initiating a call, or while
conversing. Should you experience such problems, you should
relocate such wireless devices so they are at a greater distance
from this unit, or switch them off.
354b
• Do not expose the unit to direct sunlight, place it near devices
that radiate heat, leave it inside an enclosed vehicle, or otherwise
subject it to temperature extremes. Also, do not allow lighting
devices that normally are used while their light source is very
close to the unit (such as a piano light), or powerful spotlights to
shine upon the same area of the unit for extended periods of time.
Excessive heat can deform or discolor the unit.
355b
• When moved from one location to another where the temper-
ature and/or humidity is very different, water droplets (conden-
sation) may form inside the unit. Damage or malfunction may
result if you attempt to use the unit in this condition. Therefore,
before using the unit, you must allow it to stand for several
hours, until the condensation has completely evaporated.
356
• Do not allow rubber, vinyl, or similar materials to remain on the
unit for long periods of time. Such objects can discolor or
otherwise harmfully affect the finish.
359
• Do not paste stickers, decals, or the like to this instrument.
Peeling such matter off the instrument may damage the exterior
finish.
Maintenance
401b
• To clean the unit, use a dry, soft cloth; or one that is slightly
dampened. Try to wipe the entire surface using an equal amount
of strength, moving the cloth along with the grain of the wood.
Rubbing too hard in the same area can damage the finish.
402
• Never use benzine, thinners, alcohol or solvents of any kind, to
avoid the possibility of discoloration and/or deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s buttons,
sliders, or other controls; and when using its jacks and
connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the connector
itself—never pull on the cable. This way you will avoid causing
shorts, or damage to the cable’s internal elements.
557
• A small amount of heat will radiate from the unit during normal
operation.
558a
• To avoid disturbing your neighbors, try to keep the unit’s volume
at reasonable levels. You may prefer to use headphones, so you
do not need to be concerned about those around you (especially
when it is late at night).
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise, you
will need to use equivalent packaging materials.
562
• Use a cable from Roland to make the connection. If using some
other make of connection cable, please note the following precau-
tions.
• Some connection cables contain resistors. Do not use cables
that incorporate resistors for connecting to this unit. The use
of such cables can cause the sound level to be extremely low,
or impossible to hear. For information on cable specifications,
contact the manufacturer of the cable.
Add
• Be sure to avoid
inserting your fingers
in the bass reflex ports
when transporting or
moving the speakers,
as your fingers may
become wedged and
stuck in the ports.
MA-15D_egfis.fm 5 ページ ２００５年１０月３１日 月曜日 午後７時１６分

6
Panel Description
Left Channel
fig.2
Left Channel
1. L Channel Input Jack
Connect this to L Channel Output Jack 16 on the right-
side unit. For the connection, use the included speaker
cable.
Right Channel
2. POWER Switch
Press this switch to turn the power on/off.
3. POWER Indicator
When the power is on, the indicator located at the side of
the switch will light.
4. PHONES Jack
When you connect headphones to this jack, no sound
will be heard from the speakers.
5. BASS Control Knob
6. TREBLE Control Knob
These adjust the tones of the bass and treble. Set to center
to make the tones flat.
7. VOLUME Knob (DIGITAL/LINE 1)
This adjusts the volume of devices connected to digital
input connectors 13 , 15 , and LINE 1 Input Jacks 10 .
8. VOLUME Knob (LINE 2)
This adjusts the volume of the device connected to LINE
2 Input Jacks 11 .
Right Channel
fig.3
9. AC Inlet
Connect the included Power cord here (p. 17). Plug it
firmly in, so that the cable does not accidentally become
disconnected.
10. LINE 1 Input Jacks (L, R) (stereo mini type)
11. LINE 2 Input Jacks (L, R) (RCA phono type)
12. BASS ENHANCER Switch
Switch this on to boost the bass range.
With the switch in the OFF position, sounds are output
without the effect applied. Set to “1” to boost the bass
range or to “2” for an even stronger effect.
13. Digital Input Connector (Optical)
This is the digital input connector for optic-fiber cable.
14. Digital Input Select Switch
This switch selects digital input connector 13 or 15 on
the rear panel. Select the connector used for the input
signal.
15. Digital Input Connector (Coaxial)
This is the digital input connector for coaxial cable.
16. L Channel Output Jack
Connect this to L Channel Input Jack 1 on the left-side
unit.
17. SUB-WOOFER Output Jack
Connect your sub-woofer here. Obtain separately any
sub-woofer you wish to connect and use.
12 3 4 5 67 8
10 11 12 13 14 15 16 17 9
MA-15D_egfis.fm 6 ページ ２００５年１０月３１日 月曜日 午後７時１６分

7
Español Italiano Français Deutsch English
Connections
Attaching the Rubber Feet
(Included) Precautions When Connecting and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power on
all devices before making any connections.
926a modify
• Using a connection cable that contains a resistor can cause the
sound level to be low. Use a connection cable that does not
contain a resistor.
941
• Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on devices
in the wrong order, you risk causing malfunction and/or damage
to speakers and other devices. (When turning the power off,
reverse this procedure.)
< Connected devices → MA-15D>
942
• This unit is equipped with a protection circuit. A brief interval (a
few seconds) after power up is required before the unit will
operate normally.
945
• If you need to turn off the power completely, first turn off the
POWER switch, then unplug the power cord from the power
outlet. Refer to Power Supply (p. 5).
Connection Example
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Sound Module, CD Player, MD Player, etc.
Rear Panel
select
MA-15D_egfis.fm 7 ページ ２００５年１０月３１日 月曜日 午後７時１６分

8
Bedienfeldbeschreibung
Linker Kanal
s
Linker Kanal
1. L-Kanal-Eingangsbuchse
Verbinden Sie diese Buchse mit der L-Kanal-
Ausgangsbuchse 16 der Einheit auf der rechten Seite.
Verwenden Sie für den Anschluss das beiliegende
Lautsprecherkabel.
Rechter Kanal
2. POWER-Schalter
Drücken Sie diesen Schalter, um den Netzstrom
einzuschalten/auszuschalten.
3. POWER-Anzeige
Bei eingeschaltetem Signal leuchtet die Anzeige an der
linken Seite des Schalters auf.
4. PHONES-Buchse
Wenn Sie an diese Buchse Kopfhörer anschließen, hören
Sie keinen Sound aus den Lautsprechern.
5. BASS-Drehknopf
6. TREBLE-Drehknopf
Mit diesen Bedienelementen werden Bass und Treble
reguliert. Drehen Sie die Drehknöpfe bis zur Mitte, um
einen tiefen Ton zu erzeugen.
7. VOLUME-Schaltknopf (DIGITAL/LINE 1)
Stellt die Lautstärke der Geräte ein, die an den Digital-
Eingängen 13 , 15 und an den LINE 1-Eingangsbuchsen
10 angeschlossen sind.
8. VOLUME-Schaltknopf (LINE 2)
Stellt die Lautstärke der Geräte ein, die an den LINE 2-
Eingangsbuchsen 11 angeschlossen sind.
Rechter Kanal
f
9. AC-Einlass
Schließen Sie hier das beiliegende Netzkabel an (s. 17).
Stecken Sie das Kabel fest ein, damit es nicht versehentlich
vom Anschluss getrennt werden kann.
10. LINE 1-Eingangsbuchsen (L, R) (Stereo-Ministecker)
11. LINE 2-Eingangsbuchsen (L, R) (RCA-Stift)
12. BASS ENHANCER-Schalter
Einschalten, um den Tiefenbereich anzuheben.
Wenn dieser Schalter auf OFF steht, wird Ton ohne
angelegten Effekt ausgegeben. Bei Stellung auf “1” werden
die Tiefen angehoben, und bei Stellung auf “2” noch
stärker angehoben.
13. Anschluss Digitaleingabe (optisch)
Dies ist der Digitaleingabe-Anschluss für faseroptische
Kabel.
14. Digitaleingabe-Auswahlschalter
Dieser Schalter wählt den Digitaleingabe-Anschluss 13
oder 15 auf der Rückseite aus. Wählen Sie den Anschluss,
der für das Input-Signal verwendet wird.
15. Anschluss Digitaleingabe (koaxial)
Dies ist der Digitaleingabe-Anschluss für Koaxialkabel.
16. L-Kanal-Ausgangsbuchse
Verbinden Sie diese Buchse mit der L-Kanal-
Eingangsbuchse 1 der Einheit auf der linken Seite.
17. SUB-WOOFER-Ausgangsbuchse
Schließen Sie hier Ihren Subwoofer an. Geeignete
Subwoofer sind im Fachhandel erhältlich.
12 3 4 5 67 8
10 11 12 13 14 15 16 17 9
MA-15D_egfis.fm 8 ページ ２００５年１０月３１日 月曜日 午後７時１６分

9
Español Italiano Français Deutsch English
Anschlüsse
Anschliessen der
Gummibeine (in der Packung)
Vorsichtsmaßnahmen beim
Anschließen des Netzkabels
und beim Einschalten
921
• Um Fehlfunktionen und/oder Schäden an Lautsprechern oder
anderen Geräten zu verhindern, reduzieren Sie stets die
Lautstärke und schalten alle Geräte ab, bevor Sie die Verbind-
ungen einrichten.
926a modify
• Die Verwendung von Anschlusskabeln mit Widerstand kann der
Grund für eine zu geringe Lautstärke sein. Verwenden Sie ein
Anschlusskabel, das keinen Widerstand enthält.
941
• Nachdem die Anschlüsse fertig gestellt wurden, schalten Sie die
verschiedenen Geräte in der angegebenen Reihenfolge ein. Wenn
Sie die Geräte in der falschen Reihenfolge einschalten, besteht die
Gefahr von Fehlfunktionen und/oder Schäden an Lautsprechern
und anderen Geräten. (Gehen Sie beim Ausschalten der Geräte in
der umgekehrten Reihenfolge vor).
< Angeschlossene Geräte → MA-15D>
942
• Dieses Gerät ist mit einer Schutzschaltung versehen. Ein kurzer
Intervall (einige Sekunden) nach dem Einschalten ist erforderlich,
bevor das Gerät normal arbeitet.
Anschluss-Beispiel
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Soundmodul, CD-Player, MD-Gerät, etc.
Rückseite
Auswahl
MA-15D_egfis.fm 9 ページ ２００５年１０月３１日 月曜日 午後７時１６分

10
Description
Canal gauche
Canal gauche
1. Prise d'entrée canal L (G)
Connectez à la prise de sortie du canal L 16 sur la droite
de l'appareil. Pour la connexion, utilisez le câble pour
enceintes inclus.
Canal droit
2. Commutateur POWER
Cet interrupteur permet de mettre l'appareil sous/hors
tension.
3. Voyant POWER
Le voyant situé à côté du commutateur s'allume lorsque
le canal est activé.
4. Prise PHONES (casque)
Si vous reliez un casque à cette prise, le son ne passera
plus sur les enceintes.
5. Bouton BASS
6. Bouton TREBLE
Ils servent à régler les basses et les aiguës. Pour obtenir
un réglage neutre, mettre les boutons en position
médiane.
7. Bouton VOLUME (DIGITAL/LINE 1)
Ce bouton ajuste le volume des appareils connectés aux
connecteurs d'entrée numérique ( 13 et 14 ) et aux prises
d'entrée LINE 1 ( 10 ).
8. Bouton VOLUME (LINE 2)
Ce bouton ajuste le volume de l'appareil connecté aux
prises d'entrée LINE 2 ( 11 ).
Canal droit
9. Connecteur AC IN
Branchez ici le cordon d'alimentation (p. 17). Enfichez-le
fermement, pour éviter que le cordon ne soit déconnecté
par accident.
10. Prises d'entrée LINE 1 (L, R)
(stéréo de type mini-jack)
11. Prises d'entrée LINE 2 (L, R) (type RCA)
Pour l'entrée mono , utilisez la prise L (MONO).
12. Commutateur d'accentuation des graves
Mettre ce commutateur à « On » pour accentuer la plage
des graves.
Si le commutateur est en position « Off », les sons sont
produits sans cet effet. Placer à 1 pour accentuer la plage
des graves ou à 2 pour un effet plus prononcé.
13. Connecteur d’entrée numérique (optique)
C'est le connecteur d'entrée numérique pour câble en
fibre optique.
14. Commutateur Entrée numérique
Ce commutateur sert à sélectionner le connecteur
d'entrée numérique 13 ou 15 sur la face arrière.
Sélectionnez le connecteur utilisé pour le signal d'entrée.
15. Connecteur d’entrée numérique (coaxial)
C'est le connecteur d'entrée numérique pour câble
coaxial.
16. Prise de sortie canal L (G)
Connectez à la prise de sortie du canal L 1 sur la gauche
de l'appareil.
17. Jack de sortie du caisson de basse (sub-woofer)
Connecter le caisson de basse ici. Se procurer séparément
le caisson de basse désiré, le connecter et l'utiliser.
12 3 4 5 67 8
10 11 12 13 14 15 16 17 9
MA-15D_egfis.fm 10 ページ ２００５年１０月３１日 月曜日 午後７時１６分

11
Español Italiano Français Deutsch English
Connexions
Fixer les pieds en caoutchouc
(inclus)
Précautions à prendre lors
des connexions et de la mise
sous tension
921
• Afin d’éviter un mauvais fonctionnement et/ou d’endommager
les enceintes et autres périphériques, diminuez toujours le
volume et mettez toujours les périphériques hors tension avant
d’effectuer une connexion.
926 modify
• L'utilisation d'un câble à résistance peut entraîner une perte de
niveau sonore. Utilisez des câbles ne contenant pas de résistance.
941
• Quand les connexions sont effectuées, mettez sous tension les
différents appareils dans l’ordre spécifié. Ne pas respecter cet
ordre peut entraîner des dysfonctionnements et/ou endommager
les enceintes ou tout autre appareil. (Lors de la mise hors tension,
suivez la procédure inverse.)
< Appareils connectés → MA-15D >
942
• Cet appareil est muni d'un circuit de protection. Après la mise
sous tension, un court délai (quelques secondes) est nécessaire
avant que l'appareil fonctionne normalement.
Exemple de connexion
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Module de sons, Lecteur CD, Lecteur MD, etc.
Face arrière
Sélection
MA-15D_egfis.fm 11 ページ ２００５年１０月３１日 月曜日 午後７時１６分

12
Descrizione del pannello
Canale sinistro
fig.2
Canale sinistro
1. Presa d’ingresso canale sinistro
Collegare alla presa d’uscita del canale sinistro 16 sul
lato destro dell’apparecchio. Per effettuare il
collegamento, utilizzare il cavo per altoparlanti in
dotazione.
Canale destro
2. Interruttore POWER
Attiva o dissativa l'alimentazione.
3. Indicatore POWER
Quando acceso, líindicatore situato a lato
dellíinterruttore si illuminerà.
4. Presa PHONES
Se si collegano le cuffie a questa presa, non verrà emesso
alcun suono dagli altoparlanti.
5. Manopola BASS
6. Manopola TREBLE
Regolano i bassi e gli acuti. Regolare al centro per
uniformare il suono.
7. Manopola VOLUME (DIGITAL/LINE 1)
Questo regola il volume dei sistemi collegati ai
connettori díingresso digitali 13 , 15 e prese díingresso
LINE 1 10 .
8. Manopola VOLUME (LINE 2)
Questo regola il volume dei sistemi collegati a prese
díingresso LINE 2 11 .
Canale destro
fig.3
9. Presa AC
Collegare a questa presa il cavo di alimentazione in
dotazione (p. 17). Inserirlo a fondo per evitare che si
scolleghi accidentalmente.
10. Prese d’ingresso LINE 1 (L, R) (stereo mini plug)
11. Prese d’ingresso LINE 2 (L, R) (pin tipo RCA)
12. Interruttore BASS ENHANCER (esaltazione dei bassi)
Muovere l’interruttore per potenziare le frequenze dei
bassi.
Quando l’interruttore è in posizione OFF, il suono in
uscita non presenta l’effetto potenziato dei bassi.
Impostarlo su “1” per potenziare le frequenze dei bassi o
su “2“ per un suono ancora più potente.
13. Connettore di ingresso digitale (ottico)
Connettore d’ingresso digitale per il cavo a fibre ottiche.
14. Interruttore di selezione ingresso digitale
Questo interruttore seleziona il connettore di ingresso
digitale 13 o 15 sul pannello posteriore. Selezionare il
connettore utilizzato per il segnale in entrata.
15. Connettore di ingresso digitale (coassiale)
Connettore d’ingresso digitale per il cavo coassiale.
16. Presa d’uscita canale sinistro
Collegare alla presa d’ingresso del canale sinistro 1 sul
lato sinistro dell’apparecchio.
17. Uscita SUBWOOFER
Per il collegamento del subwoofer. È possibile collegare e
utilizzare qualsiasi subwoofer acquistato separatamente.
12 3 4 5 67 8
10 11 12 13 14 15 16 17 9
MA-15D_egfis.fm 12 ページ ２００５年１０月３１日 月曜日 午後７時１６分

13
Español Italiano Français Deutsch English
Collegamenti
Montare i Piedini in Gomma
(Inclusi)
Precauzioni durante i
collegamenti e l’accensione
921
• Per evitare malfunzionamenti e/o danni ai diffusori o ad altri
dispositivi, abbassare sempre il volume e accertarsi che tutti gli
apparecchi non siano alimentati prima di effettuare i collega-
menti.
926 modify
• L’uso di un cavo provvisto di un resistore potrebbe risultare in un
livello audio basso. Utilizzare un cavo di collegamento senza
resistore.
941
• Una volta terminati i collegamenti, accendere i vari dispositivi
nell’ordine indicato. Se i dispositivi vengono accesi nell’ordine
sbagliato, si rischia di provocare malfunzionamenti e/o danni ai
diffusori e agli altri dispositivi. (Seguire la procedura al contrario
nella fase di spegnimento.)
< Dispositivi collegati → MA-15D>
942
• Questíunità è dotata di un circuito di protezione. è necessario un
breve intervallo (di pochi secondi) dopo líaccensione prima che
líunità funzioni normalmente.
Esemp io di collegamenti
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Modulo sonoro, lettore CD, lettore MD, ecc.
Pannello posteriore
Selezionare
MA-15D_egfis.fm 13 ページ ２００５年１０月３１日 月曜日 午後７時１６分

14
Descripción del panel
Canal izquierdo
fig.2
Canal izquierdo
1. Jack de entrada del canal izquierdo
Conéctelo al jack de salida del canal izquierdo 14 que se
encuentra en el lado derecho de la unidad. Para la
conexión, utilice el cable del altavoz que viene incluido.
Canal derecho
2. Interruptor POWER
Presione este interruptor para encender y apagar la
unidad.
3. Indicador POWER
Al encender el suministro de energía, se encender· el
indicador ubicado a un lado del interruptor.
4. Jack de los auriculares
Cuando conecte los auriculares a este jack, los altavoces
no emitirán ningún sonido.
5. Control BASS
6. Control TREBLE
Estos botones ajustan el tono de los bajos y los agudos.
Cóloquelos en el centro para que los tonos queden
nivelados.
7. Control VOLUME (DIGITAL/LÍNEA 1)
Esto ajusta el volumen de los dispositivos conectados a
los conectores de entrada digital 13 , 15 , y los enchufes
de entrada 10 de la LÕNEA 1.
8. Control VOLUME (LÍNEA 2)
Esto ajusta el volumen del dispositivo conectado a los
enchufes 11 de la LÕNEA 2.
Canal derecho
fig.3
9. Entrada CA
Conecte aquí el cable de alimentación (Paginas 17).
Enchúfelo de modo que el cable no se pueda desconectar
accidentalmente.
10. Jacks de entrada de la LÍNEA 1 (Izquierda, Derecha)
(tipo de estéreo mini)
11. Jacks de entrada de la LÍNEA 2
(Izquierda, Derecha) (tipo de patilla RCA)
12. Interruptor REFORZADOR DE TONOS GRAVES
Active para aumentar el rango de tonos graves.
Con el interruptor en la posición OFF (apagado), los
sonidos se crean sin aplicar el efecto. Coloque en “1”
para aumentar el rango de tonos bajos o en “2” para un
efecto aún más intenso.
13. Conector de entrada digital (Optical)
Este es el conector de entrada digital para el cable de
fibra óptica.
14. Interruptor de selección de entrada digital
Este interruptor selecciona el conector de entrada digital
13 o 15 en el panel posterior. Seleccione el conector que
se utiliza para la señal de entrada.
15. Conector de entrada digital (Coaxial)
Este es el conector de entrada digital para el cable
coaxial.
16. Jack de salida del canal izquierdo
Conéctelo al jack de entrada del canal izquierdo 1 que se
encuentra en el lado izquierdo de la unidad.
17. Conector de salida de SUB-WOOFER
Conecte aquí su sub-woofer. Obtenga por separado
cualquier sub-woofer que desee conectar y usar.
12 3 4 5 67 8
10 11 12 13 14 15 16 17 9
MA-15D_egfis.fm 14 ページ ２００５年１０月３１日 月曜日 午後７時１６分

15
Español Italiano Français Deutsch English
Conexiones
Incluye los pies de goma Precauciones que debe tener
en cuenta cuando conecte y
encienda la unidad
921
• Para evitar anomalías en el funcionamiento o daños en los
altavoces u otros aparatos, baje siempre el volumen y apague
todos los aparatos antes de realizar cualquier conexión.
926 modicar
• Si utiliza un cable que posea un reostato, el nivel de sonido puede
bajar. Utilice un cable de conexión que no contenga un reostato.
941
• Una vez completadas las conexiones, encienda los diferentes
aparatos en el orden especificado. Si enciende los aparatos en un
orden equivocado, puede causar anomalías en el funcionamiento
o daños en los altavoces y otros aparatos. (Cuando apague el
sistema, siga estas instrucciones en el orden inverso)
< Aparatos conectados → MA-15D>
942
• Esta unidad est· equipada con un circuito de protección. Se
requiere de un breve intervalo (unos cuantos segundos) después
de encender el suministro de energía antes de que la unidad
opere normalmente.
Ejemplo de conexión
INPUT
(FROM RIGHT)
OUTPUT
(TO LEFT)
Módulo de sonido, reproductor de CD, reproductor de MD, etc.
Panel posterior
Selección
MA-15D_egfis.fm 15 ページ ２００５年１０月３１日 月曜日 午後７時１６分

16
Specifications
Rated Power Output
30 W (15 W + 15 W)
Speaker Units
Woofer: 10 cm /
3-15/16” (Magnetically-Shielded)
Tweeter: 5 cm /
2” (Magnetically-Shielded)
Frequency Range
70 Hz to 20 kHz
Nominal Input Level
Line 1: -10 dBu
Line 2: -10 dBu
Input Impedance
20 k ohms
Controls
< R Channel >
BASS Control Knob
TREBLE Control Knob
VOLUME Knob x 2
• VOLUME 1 (digital input + line 1)
• VOLUME 2 (RCA phono)
POWER Switch
BASS ENHANCER Switch
Digital Input Select Switch
Indicators
< R Channel>
Power Indicator
Connectors
< R Channel >
Front: PHONES Jack (stereo 1/4” phone type)
Rear: LINE 1 Jacks (L, R) (stereo mini type)
LINE 2 Jacks (L, R) (RCA phono type)
L Channel Output Jack (RCA phono type)
SUB-WOOFER Output Jack (RCA phono type)
Digital Input Connector (Optical)
Digital Input Connector (Coaxial)
< L Channel >
Rear: L Channel Input Jack (RCA phono type)
Digital Input Section.
Sampling Rate: 32/44.1/48/96/192kHz
D/A Converter:24 bits
Enclosure
2-way Bass-reflex type (Wooden Cabinet)
Power Supply
AC 117 V, AC 220 V, AC 230 V or AC 240 V: 50/60 Hz
Current Consumption
45 W
Dimensions
< R Channel >
158.5 (W) x 221.5 (D) x 250.0 (H) mm
6-1/4 (W) x 8-3/4 (D) x 9-7/8 (H) inches
< L Channel >
158.5 (W) x 215.0 (D) x 250.0 (H) mm
6-1/4 (W) x 8-1/2 (D) x 9-7/8 (H) inches
Weight
< R Channel >
5 kg / 11 lbs 1 oz
< L Channel >
2.5 kg / 5 lbs 9 oz
Accessories
Owner’s Manual
Speaker Cable (RCA phono type)
Power Cord
Rubber Foot x 4
* 0 dBu = 0.775 V rms
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
MA-15D_egfis.fm 16 ページ ２００５年１０月３１日 月曜日 午後７時１６分

17
For 230 V (English)
This box contains continental and British power cables. Please select the correct type for your country.
Für 230 V (Deutsch)
Diese Packung beinhaltet europäische und britische Netzkabel. Bitte suchen Sie sich die richtige Variante für Ihr Land aus.
Pour 230 V (Français)
Cette boite contient des alimentations anglaises ou continentales. Merci de choisir l’alimentation appropriée de votre pays.
Per 230 V (Italiano)
La confezione contiene alimentatori con spina europea e Inglese. Scegliete quella adatta alla Vostra nazione.
Para 230 V (Español)
Esta caja contiene cables de corriente continentales y británicos. Por favor seleccione el tipo correcto para su país.
Application of AC230 V
Power Cord
for UK
except for UK
MA-15D_egfis.fm 17 ページ ２００５年１０月３１日 月曜日 午後７時１６分

MEMO
MA-15D_egfis.fm 18 ページ ２００５年１０月３１日 月曜日 午後７時１６分

19
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For EU Countries
For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
NOTICE
AVIS
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
MA-15D_egfis.fm 19 ページ ２００５年１０月３１日 月曜日 午後７時１６分

03895334 3J
As of December 1, 2005 (EDIROL-1)
Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized
EDIROL/Roland distributor in your country as shown below.
EUROPE
EDIROL (Europe) Ltd.
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: [phone]
FAX:[phone]
http://www.edirol.com/europe
Deutschland
TEL: [phone]
France
TEL: [phone]
Italia
TEL: [phone]
CANADA
Roland Canada Music Ltd.
(Head Office)
5480 Parkwood Way Richmond
B. C., V6V 2M4 CANADA
TEL: [phone]
Roland Canada Music Ltd.
(Toronto Office)
170 Admiral Boulevard
Mississauga On L5T 2N6
CANADA
TEL: [phone]
U. S. A.
Roland Corporation U.S.
5100 S. Eastern Avenue
Los Angeles, CA 90040-2938,
U. S. A.
TEL: [phone]
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany
Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: [phone]
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: [phone]
SOUTH AFRICA
Paul Bothner(PTY)Ltd.
Royal Cape Park, Unit 24
Londonderry Road, Ottery 7800
Cape Town, SOUTH AFRICA
TEL: [phone]
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: [phone]
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 3 Section Anhuaxili
Chaoyang District Beijing
100011 CHINA
TEL: [phone]
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie
Yi Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
TEL: [phone]
HONG KONG
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: [phone]
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra
Mahalaxmi Flats Compound
Off. Dr. Edwin Moses Road,
Mumbai-400011, INDIA
TEL: [phone]
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: [phone]
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: [phone]
MALAYSIA/
SINGAPORE
Roland Asia Pacific Sdn. Bhd.
45-1, Block C2, Jalan PJU 1/39,
Dataran Prima, 47301 Petaling
Jaya, Selangor, MALAYSIA
TEL: [phone]
PHILIPPINES
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: [phone]
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung
Shan N.Road Sec.2, Taipei,
TAIWAN, R.O.C.
TEL: [phone]
THAILAND
Theera Music Co. , Ltd.
330 Verng NakornKasem, Soi
2, Bangkok 10100, THAILAND
TEL: [phone]
VIETNAM
SAIGON MUSIC
DISTRIBUTOR
(TAN DINH MUSIC)
138 Tran Quang Khai Street
Dist. 1, Ho Chi Minh City
VIETNAM
TEL: [phone]
AUSTRALIA/
NEW ZEALAND
Roland Corporation
Australia Pty.,Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
For Australia
Tel: [phone]
For New Zealand
Tel: [phone]
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: [phone]
BARBADOS
A&B Music Supplies LTD
12 Webster Industrial Park
Wildey, St.Michael, Barbados
TEL: [phone]
BRAZIL
Roland Brasil Ltda.
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: [phone]
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: [phone]
COLOMBIA
Centro Musical Ltda.
Cra 43 B No 25 A 41 Bododega 9
Medellin, Colombia
TEL: [phone]
CURACAO
Zeelandia Music Center Inc.
Orionweg 30
Curacao, Netherland Antilles
TEL:[phone]
DOMINICAN REPUBLIC
Instrumentos Fernando Giraldez
Calle Proyecto Central No.3
Ens.La Esperilla
Santo Domingo,
Dominican Republic
TEL:[phone]
ECUADOR
Mas Musika
Rumichaca 822 y Zaruma
Guayaquil - Ecuador
TEL:[phone]
GUATEMALA
Casa Instrumental
Calzada Roosevelt 34-01,zona 11
Ciudad de Guatemala
Guatemala
TEL:[phone]
HONDURAS
Almacen Pajaro Azul S.A. de C.V.
BO.Paz Barahona
3 Ave.11 Calle S.O
San Pedro Sula, Honduras
TEL: [phone]
MARTINIQUE
Musique & Son
Z.I.Les Mangle
97232 Le Lamantin
Martinique F.W.I.
TEL: [phone]
Gigamusic SARL
10 Rte De La Folie
97200 Fort De France
Martinique F.W.I.
TEL: [phone]
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico
D.F. MEXICO
TEL: [phone]
NICARAGUA
Bansbach Instrumentos
Musicales Nicaragua
Altamira D'Este Calle Principal
de la Farmacia 5ta.Avenida
1 Cuadra al Lago.#503
Managua, Nicaragua
TEL: [phone]
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: [phone]
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: [phone]
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: [phone]
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: [phone]
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: [phone]
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni,
ROMANIA
TEL: [phone]
RUSSIA
MuTek
Dorozhnaya ul.3,korp.6
117 545 Moscow, RUSSIA
TEL: [phone]
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: [phone]
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: [phone]
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: [phone]
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo,
UKRAINE
TEL: [phone]
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: [phone]
BAHRAIN
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: [phone]
PERU
Audionet
Distribuciones Musicales SAC
Juan Fanning 530
Miraflores
Lima - Peru
TEL: [phone]
TRINIDAD
AMR Ltd
Ground Floor
Maritime Plaza
Barataria Trinidad W.I.
TEL: [phone]
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa 1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: [phone]
VENEZUELA
Instrumentos Musicales
Allegro,C.A.
Av.las industrias edf.Guitar
import
#7 zona Industrial de Turumo
Caracas, Venezuela
TEL: [phone]
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: [phone]
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: [phone]
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: [phone]
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: [phone]
FINLAND
Roland Scandinavia As, Filial
Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: [phone]
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844
Norderstedt, GERMANY
TEL: [phone]
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: [phone]
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint,
HUNGARY
TEL: [phone]
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
TEL: [phone]
IRAN
MOCO INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: [phone]
ISRAEL
Halilit P. Greenspoon & Sons
Ltd.
8 Retzif Ha’aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: [phone]
JORDAN
MUSIC HOUSE CO. LTD.
FREDDY FOR MUSIC
P. O. Box 922846
Amman 11192 JORDAN
TEL: [phone]
KUWAIT
EASA HUSAIN AL-YOUSIFI
& SONS CO.
Abdullah Salem Street,
Safat, KUWAIT
TEL: [phone]
LEBANON
Chahine S.A.L.
Gerge Zeidan St., Chahine
Bldg., Achrafieh, P.O.Box: 16-
5857
Beirut, LEBANON
TEL: [phone]
OMAN
TALENTZ CENTRE L.L.C.
Malatan House No.1
Al Noor Street, Ruwi
SULTANATE OF OMAN
TEL: [phone]
QATAR
Badie Studio & Stores
P.O. Box 62,
Doha, QATAR
TEL: 423554
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary
Bldg., 1st Floor, Alkhobar,
SAUDI ARABIA
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: [phone]
SYRIA
Technical Light & Sound
Center
Rawda, Abdul Qader Jazairi St.
Bldg. No. 21, P.O.BOX 13520,
Damascus, SYRIA
TEL: [phone]
TURKEY
ZUHAL DIS TICARET A.S.
Galip Dede Cad. No.37
Beyoglu - Istanbul / TURKEY
TEL: [phone]
U.A.E.
Zak Electronics & Musical
Instruments Co. L.L.C.
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai,
U.A.E.
TEL: [phone]
ASIA
AFRICA
AUSTRALIA/
NEW ZEALAND
EUROPE
CENTRAL/LATIN
AMERICA
MIDDLE EAST
NORTH AMERICA
MA-15D_egfis.fm 20 ページ ２００５年１０月３１日 月曜日 午後７時１６分