Roland Lucina AX-09 User manual

AX-09 System Update Version 1.10
How to tell the version
Please check the version of the system working on your Lucina AX-09 before
downloading the archive file.
1. While holding down the FAVORITE [ A ], [ B ], and [ WRITE ]
buttons simultaneously, turn on the Lucina AX-09's power.
The display will indicate " U t L "; the Lucina AX-09 will be in
Utility mode.
2. Press the TONE [ 1 ] button.
The display will indicate " v E r ," and then the version of your Lucina
AX-09 will appear.
If you want to continue playing the Lucina AX-09, turn off the power
and wait several seconds before turning it on again.
* Do not perform the update if the product is already up-to-date.
Version history
[ Ver.1.10 ]
[Additional function]
●Available for Roland Wireless Connect ( WNA1100-RL ).
Please refer to the "About the Wireless LAN Function (AX-
09_l_wireless_e01_W.pdf )" for detailed information.
Items to prepare for the update
Following items are required to perform the update.
●Lucina AX-09
●USB Flash Memory ( Roland's M-UF2G is recommended )
* It needs to be formatted with MS-DOS file system (FAT or FAT32)
on a PC.
●A computer with a USB connector ( Windows, Mac )
How to download and expand the archive file
Download the file named "ax09_sys_v110.zip". It is an archive file in zip
format; please double click on the file to expand. After expanding the file,
the folder "ax09_sys_v110" will appear.
Cautions with the update
●We recommend that you save your data to a USB Flash Memory before you
© 2012 Roland Corp. U.S.

perform the update. If a problem occurs and your data is lost, you will
be able to restore the original state by reloading the data you saved. For
details on the procedure, refer to the following sections of the "Backing Up
Lucina AX-09 Settings to USB Memory" of the Owner's Manual.
●Never apply this update data to any product other than the Lucina AX-
09. This update data may destroy the data or system program of other
products.
●Never power-off your Lucina AX-09 while the update is in progress!
●If a power failure or similar accident occurs during the update process, the
Lucina AX-09 won’t be able to start up in normal operating mode. This will
require servicing, so you will need to contact Roland service center near
you if this occurs.
●We regret that we are unable to answer questions regarding the update
procedure using this system program. Please perform the update
responsibly, following the directions given in this document.
How to update
Please install the system program " ax_09_up.bin" to the Lucina AX-09 by
following the process below.
Important notice: Never turn the Lucina AX-09 off during the
update process or the Lucina AX-09 will no longer reboot correctly.
1. Copy the update-use file “ax_09_up.bin” to the root directory
of the USB Flash Memory. This file can be found in the
extracted "ax09_sys_v110" folder.
2. Make sure the unit's power is switched off, then connect the USB
Flash Memory device to the USB MEMORY connector at the left edge
of the Top Panel.
3. Switch on the power.
The message " U P d " appears on the display and the update
starts. The update operation takes about 20 seconds.
When the message " d n E " appears, the update has finished.
4. Switch off the power.
5. Detach the USB Flash Memory, then switch on the power to the unit
and verify that the version has been updated.
© 2012 Roland Corp. U.S.