Rolbak Gold EDITION User manual

RB-G
ASSEMBLY INSTRUCTIONS

Thank you for your purchase of this Rolbak product.
We work around the clock and around the globe to ensure that Rolbak
products maintain the highest possible quality. However, in the rare
instance that your product is defective or missing parts, contact your
retailer to submit parts requests or warranty claims. Please read the
warranty information at the back of these assembly instructions for
further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN ENTIRETY
BEFORE ASSEMBLING YOUR PRODUCT.
THANK YOU!
2

WARNINGS
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUCTIONS
CAREFULLY. AT LEAST 2 ADULTS ARE NEEDED FOR THE ASSEMBLY OF THE
ROLBAK NET.
NOTE: PORTABLE BASKETBALL HOOPS - ADD EXTRA WEIGHT TO THE PORTABLE
SYSTEM’S BASE AS A SAFETY PRECAUTION TO PREVENT YOUR UNIT FROM
FALLING OVER, ESPECIALLY IN WINDY CONDITIONS.
DO NOT CLIMB ON THE NET. NEITHER ROLBAK NOR ANY OF ITS REPRESENTA-
TIVES, ASSUMES LIABILITY FOR INJURY RESULTING FROM MISUSE OF THE
ROLBAK SYSTEM.
FOR AGES 12 AND UP.
3

TABLE OF CONTENTS
4

PARTS IDENTIFIER (NOT TO SCALE)
5

ASSEMBLY INSTRUCTIONS
PART 1 - ATTACHING THE ROLBAK NET | Method A - Rim Quick Attach
Recommended for roof-mounted systems, portable hoops and round posts.
6

ASSEMBLY INSTRUCTIONS (CONT.)
7
PART 1 - ATTACHING THE ROLBAK NET | Method B - Extension Arm Attachment

ASSEMBLY INSTRUCTIONS (CONT.)
8
PART 1 - ATTACHING THE ROLBAK NET | Method B - Extension Arm Attachment (Cont.)

ASSEMBLY INSTRUCTIONS (CONT.)
9
PART 1 - ATTACHING THE ROLBAK NET | Method B - Extension Arm Attachment (Cont.)

ASSEMBLY INSTRUCTIONS (CONT.)
10
PART 2 - SECURING THE NET BASE
1. Insert the empty Black Vinyl Water Bag into the opening at the base of the Rolbak Net, feeding it through to the
other side.
2. To ll the Water Bag, rst lift the cap to reveal the valve opening. [Note: In cooler climates, the plastic may be sti and
inexible. Allow the Water Bag to warm up by laying it in the sun for 5 to 10 minutes to soften the plastic to make it more
exible.]
3. Holding the opening rmly, press straight down on the valve with your nger.
4. Insert the funnel into the valve opening. Use the garden hose to ll the Water Bag approximately three-quarters
full, holding the valve upright to prevent leaking. Do not overll!
5. Remove the funnel, replace the cap and secure the ends of the Rolbak Net Base. [Note: The Water Bag may freeze in
colder climates. Non-toxic swimming pool antifreeze, available at pool supply stores, may be added to prevent freezing.]
6. Open Cover Bag and place below Rolbak Net Base. Determine desired Rolbak Net height and roll excess Rolbak
Net forward to fasten around base.
[Note: Height adjustment may not be necessary depending on basketball system height. Cover Bag may be used for extra
base protection.]