Rolbak Guard Net 20 User manual

NGD2124
20
ASSEMBLY INSTRUCTIONS

Thank you for your purchase of this Rolbak product.
We work around the clock and around the globe to ensure that Rolbak
products maintain the highest possible quality. However, in the rare
instance that your product is defective or missing parts, contact your
retailer to submit parts requests or warranty claims. Please read the
warranty information at the back of these assembly instructions for
further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN ENTIRETY
BEFORE ASSEMBLING YOUR PRODUCT.
THANK YOU!
2

PARTS IDENTIFIER (NOT TO SCALE)
3

ASSEMBLY INSTRUCTIONS
4
1. Join three Round Silver Tubes together - swaged ends t into one another forming one Assembled
Tube. Align holes on adjoined tubes, insert one Screw into each hole and tighten. Repeat assembly with
remaining Round Silver Tubes and Screws. Attach Plastic End Cap to one open end of each Assembled
Tube.
3. Lay fully extended Guard Net on ground near installation site. Using rubber mallet, drive prongs of
Metal Ground Anchors into the ground perpendicular to the desired net placement.
4. Raise Guard Net into position over embedded Metal Ground Anchor. Slide Tubes onto Metal Ground
Anchors.
2. Insert one Assembled Tube, capped end rst, into each opening at the bottom of the Guard Net.

ASSEMBLY INSTRUCTIONS (CONT.)
5

ASSEMBLY INSTRUCTION OPTIONS
6

90-DAY LIMITED WARRANTY
This Rolbak product is warranted to the original purchaser to be free from defects in material or work-
manship for a period of ninety days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; Rolbak does not assume any liability
for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, Rolbak shall repair or replace defective parts at no cost to the
purchaser. Shipping charges and insurance are not covered and are the responsibility of the pur-
chaser. Labor charges and related expenses for removal, installation or replacement of the product
or components are not covered under this warranty.
Rolbak reserves the right to make substitutions to warranty claims if parts or unavailable or obsolete.
Rolbak shall not be liable for loss of use of the product or other consequential or incidental costs,
expenses or damages incurred by the consumer of any other use. The user assumes all risk of injury
resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
merchantability or tness for use to the extent permitted by Federal or state law. Neither Rolbak nor
any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer. A purchase receipt or other proof
of date of purchase will be required for all warranty claims. The model number and part
numbers will be required when submitting parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
7