Rollei Actioncam S-30 WiFi User manual

USER GUIDE
FOR ENGLISH | GERMAN | SPANISH | PORTUGUESE | ITALIAN
GREEK | FRENCH | DUTCH | POLISH | CZECH | RUSSIAN | HUNGARIAN
SWEDISH | FINNISH | NORWEGIAN | DANISH
facebook.com/
rollei.actioncam.en
facebook.com/
rollei.actioncam.de
24
Months Warranty
and Replacement
24
Monate
Austauschservice
Rollei Actioncam
S-30 WiFi

3
English ................................... 4 – 17
German ................................. 18 – 31
Spanish ................................. 32 – 45
Portuguese .............................. 46 – 59
Italian ................................... 60 – 73
Greek ................................... 74 – 87
French ................................. 88 – 101
Dutch ................................. 102 – 115
Polish ................................. 116 – 129
Czech ................................. 130 – 143
Russian ............................... 144 – 157
Hungarian ............................. 158 – 172
Swedish ............................... 173 – 185
Finnish ................................ 186 – 199
Norwegian ............................ 200 – 213
Danish ................................ 214 – 227
Rollei Actioncam S-30 WiFi

4
Appearances and Buttons
Part names1
1. USB jack
2. Start/Stop/Power/Shutter button
3. Indicator light
4. Speaker
5. Microphone
6. OK button
7. Up/Wi-Fi button
8. Mode button
9. Menu button
10. Down button
11. LCD screen
12. Lens
13. Micro SD Card slot
14. HDMI jack
15. Reset
16. Bracket
17. Tripod slot
18. Water proof case
1) All images and illustrations given in this manual are for explanation purpose and may differ
slightly from the actual product.

5
Mounting accessories2
In order to use the camcorder more convenient in outdoor sports or in under water situations, we
have provided two kinds of main mounts packaged in this camcorder. Mount “A” is used in fixing to
a bike, and mount “B” is used in fixing to a helmet.
A B
By installing these mounts, the camcorder can be fixed to bikes or helmets. The operating steps are
as follow…
2) In this paragraph, all camcorders in images are used the water proof case, and the bracket also
can make it in the same way.

6
Fix the Rollei S-30 Wifi camcorder to a bike
1. Put the camcorder into the water proof case or the bracket, then lock it.
2. Find the mount “A”, fix it to the handlebar of a bike by placing the rubber pad, and rotating
screws.
3. Choosing connectors from the three given below, and then fix them to the part 1 of the main
mount “A”.
4. Fix the connector 2 that have a metal screw on it to the last connector.
5. Fix the tripod slot of the camcorder to the metal screw of the mount 2 respectively.
6. Adjust those screws to make the camcorder more steady and convenient.
Fix the Action Rollei S-30 Wifi to a helmet
1. Put the camcorder into the water proof case or the bracket, then lock it .
2. Fix the connector 3 to the main mount “B” as given below.
3. Choosing connectors from the three given below, and then fix them to the connector 3.
4. Fix the connector 2 that have a metal screw on it to the last connector.

7
5. Fix the tripod slot of the camcorder to the metal screw of the mount 2 respectively.
6. Adjust those screws to make the camcorder more steady and convenient.
7. After fixing the camcorder to the mount correctly , you need to choose which way to fix them
to the helmet.
a) Using a strap: Insert a strap into the two ends of the main mount “B”, adjust length according to
the helmet’s size, and then tie the strap up to your helmet.
b) Using a sticker: Use the side of a sticker paste to the bottom of the main mount “B”, and the
other side paste to your helmet.
NOTES:
• Itwillrecordnosoundswhenusingthewaterproofcase
• Whenusedunderwater,thewaterproofcasewithsprayordropsisanormalphenomenon.
• Recordingatonceafterusingitinwatermaycausetherecordinglesisblurry.

8
Preparing before using
Charging the camcorder
The camcorder has an internal lithium-polymer battery;
please charge it for about 6-10 hour, the first time.
1. Turn off the camcorder.
2. Find the USB cable, and connect to a computer.
3. Open the USB cover at the side of the camcorder, and find the USB jack in it.
4. Connect the other side of the USB cable to the USB jack of the camcorder.
5. During charging, the busy indicator light turns red, once the battery is fully charged, the busy
indicator light will turn off.
6. Its normal that the camcorder will become warm after extend using.
7. Don’t use the power adapter output current is below 1A.
8. Over heat of the camcorder, please turn it off.
9. Don’t use the camcorder when charging.
Inserting the Micro SD card
Before using this camcorder, a Micro SD Card (at least Class 4) that can save your video files and
images is necessary.
1. Find the Micro SD Card cover at the bottom of the camcorder.
2. Open it and find the Micro SD Card slot in it, then put the Micro SD Card into the slot, make sure
the direction of the card is the same as shown on the slot cover.
3. If it’s inserted successfully, you will hear a litter clear buzzer.
TIPS: The camcorder cannot record without a Micro SD Card.

9
Basic operation
Turn the camcorder on and off.
1. Turn the camcorder on
Long press the POWER button to turn on the camcorder.
2. Turn the camcorder off
Long press the POWER button again to turn off the camcorder.
Normally the busy indicator light always keep blue after turning on the camcorder, but when turning
on and turning off the camcorder and other movement, the busy indicator light will flash.
Switching the mode
The camcorder has three types of modes: video-, capture-, and playback mode. Press the
MODE button to switch between these modes.
Video mode. Recording movie clips
Capture mode. Taking still images
Playback mode. Viewing the recorded files
Setting the camcorder
After turning on the camcorder, press the MENU button in any mode to enter the menu interface, and
then press the MODE button to enter the set-up menu . Press the UP and DOWN button to choose
the option to set for the camcorder. At last, press the OK button to enter its submenu or to confirm
the settings, press the MENU button to exit. (Sounds/Backlight/ Power frequency/ Power save/Date
& time... / Language/ USB/ Format / Reset All...)

10
Powers save
To save power, using this function, the camcorder will turn off automatically after a period of time.
[Off] / [1 min] / [3min] / [5min]
Date & time...
Set the date and time. Press the MODE button to switch between year, month, date, hour, minute,
second. Press the OK button to confirm.
Language
Set on-screen language. [EN] / [FR] / [NL] / [ES] / [IT] /[PT] / [DE] / [DK] / [SE] /
[FI] / [GR] / [CZ[ / [PL] / [HU] / [RU] / [NO]
USB
Extend other functions by using USB.
[MSDC]: choose this option to enter the storage mode when connecting to a computer.
[Pictbridge]: choose this option to print images when connecting to a printer marked with the
Pictbridge logo.
[H264]/[MJPG]: choose this function to set it as a PC camera when connecting to a computer. The
operating steps as below:
Select this option; and connect the camcorder to a computer; then you can use it as
a PC camera by double click the icon in [my computer]
After connecting to a computer, Press the MODE button to switch between [MSDC] and
PC camera mode.