Rollei dk3000 User manual

3.3 MegaPixels DSC
User Manual - English

Contents
Safety Precautions 1
Specifications 2
Name of Parts 4
Before Using the Camera 8
1.Preparation 9
Powering the Camera 9
Storage Media 10
2. Recording 12
Basic Recording 12
Other Advanced Menu Functions 15
3. Playback / Delete 16
Basic Playback 16
Various Playback Functions 18
Deleting Files 23
4. Others 24
Changing the Camera Settings 24
Transferring your Image to the computer 27
Video Capture 28
Warning Message 29
○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○

1
Safety Precautions


Danger
Do not attempt to disassemble, repair or alter the equipment
yourself. The high-voltage circuitry in the equipment poses
significant electrical hazard.
Do not attempt to disassemble, alter or directly solder the
battery.
Do not put the battery in a fire, attempt to heat it, uses it in
high temperature environment such as next to a fire or inside
a car.
Do not put it into water or allow it to get wet.
Do not use this camera in the bathroom.
Do not use batteries that are significantly damaged or
deformed.
Turn off the power immediately in the event of irregularity,
such as the equipment emitting smoke or a strange smell.
Remove the battery as soon as possible, being careful to
avoid electric shocks or burns. If you are drawing power from
a household electric outlet, be sure to unplug the power cord.
Keep the battery and SD memory card used in this camera
out of the reach of children to prevent accidental ingestion.

2
Specification
General
zVideo Signal Protocol NTSC / PAL
zPower Source Rechargeable Lithium-Ion Battery 3.7V
/ AC Adapter 5V
zDimensions (WxHxD) 116.7 x 53.8 x 29.5 mm (4.5” x 2.1” x 11.6)
zWeight Approx. 172g (6.0 oz) (without battery)
zOperating Conditions Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 85% or less
zStorage Temperature -20°C ~ 60°C (-4°F to 140°F)
Memory Media
zInternal Memory 16 MB
zMemory Card Secure Digital Memory Card Slot

3
zShutter Speed 4, 2, 1 ~ 1/ 1000
zISO Sensitivity Auto, ISO 200, ISO 400
zBuilt-in Flash Modes: Flash Off, Forced, Auto, Slow Synchro,
Red-eye Reduction
zImage zStill Picture: 2848 x 2136 / 2048 x 1536 /
Resolution 1600 x 1200/ 1280 x 960
zMotion Picture:320 x 240
zFile Format JPEG (Exif2.1), TIFF, AVI
Camera
zCCD 1/2.7 inch 3.34 mega pixels
zLens Zoom Lens F2.8 ~ 3.8
zFocal Length f = 5.9 ~ 11.8 mm (equivalent to 38 ~ 76 mm in
35 mm format )
zShooting Range zGeneral: Approx. 14 cm (5.5”) (at Wide)
Approx. 40 cm (15.7”) (at Tele)
zMacro: Approx.7 ~ 14 cm (2.75” to 5.5”) (at Wide)
zDigital Zoom 2X
zMonitor 1.5 inch LTPS TFT color LCD
zWhite Balance Auto / Preset (Daylight, Overcast, Fluorescent
Light, Tungsten Light)
zExposure zExposure Metering System: Center-weighted
Compensation zMode: Auto /Manual compensation (± 2.0EV in
0.5 EV steps)
zMetering: TTL CCD method

4
Names of Parts


Camera
a. Front
b. Back
Shutter
Release Power
Switch
Flash
Sensor
Flash
Lens
Wrist Strap Eyelet
Battery Recharging
and Self-Timer LED
Card Cover
Card Cover Switch Battery Cover
Power Supply
Terminal DC Input
USB Terminal

Operating Parts
Main Switch
The camera offers a number of modes for
recording and playback. The mode dial is
used to select the desired mode.
Mode Dial Mode Name Description
Set up mode This mode is used for changing
and confirming the camera
setting.
Playback mode This mode is used for playing
recording files.
Still Picture mode This mode is used for normal
shooting.
PIC Button
Button
/ Zoom Button
Mode Dial
MENU / ENTER Button
CANCLE Button
DISPLAY Button
LCD Monitor
Vedio Out
SET UP
Flash LED
Autofocus LED
5

Continuous Picture are recorded
Shooting mode continuously while the
shutter release button
is pressed.
Motion Picture This mode is used for recording
motion picture.
4-way Button
For Up / Down / Left / Right and Zoom Function.
MENU / ENTER Button
Display Menu and various modes.
Button
Icon Display Mode Description
Lit Flash The flash will not fire under
Off any conditions.
No No Auto The flash fire automatically in
Icon Display low light and back light
conditions.
Lit Forced The flash will fire under
any conditions.
Blinking Slow The flash can be fired to
Synchro illuminate the subject while a slow
shutter speed correctly exposes the
background.
Tele / Up
Right
Wide / Down
Left
6

PIC Button
The camera offers six image quality modes: 2848 x 2136N,
2048 x 1536NC, 2048 x 1536F, 2048 x 1536N, 1600 x 1200N,
and 1280 x 960.
The default is 2048 x 1536N.
2848 x 2136N used for taking pictures with higher image
quality.
NC (non-compressed) mode is for recording data without
compressing it. N and F stand for Normal and Fine.
CANCEL Button
For Canceling.
DISPLAY Button
For LCD Display Function and Adjusting the Brightness of
the LCD Monitor.
The data display changes to show the recording mode,PIC
mode, recordable picture count, etc. each time the
DISPLAY button is pressed.
Press this button (approx. 2 seconds)
to adjust the brigstness of the LCD
monitor when it is hard to see, such
as in strong sunlight.
2002/07/15 11:25
N 1600
26
2002/07/15 11:25
7
This mode can not be played back by using
Zoom Playback Function.

8
Before using the camera
Attaching the Wrist Strap
Attach the wrist strap to the camera.
Pass the end of the strap through
the wrist strap eyelet on
the camera.
Setting the Date and Time
1. Set the mode dial to [ SET UP ].
2. Press the or button to select
[ DATE SETTING ] and press Button.
3. Press , , and buttons to set
the date and time. Press or button
to highlight the item you wish to adjust,
and press the or button to adjust
the item.
SET UP 2/3
BEEP SOUND
POWER SAVE
SEQ.FILE NO.
LANGUAGE
ON
OFF
ON
ENGLISH
SELECT:
DATE SETTING
SET DATE/TIME
SEL.:ENTER
CANCEL:CANCEL
2002 / /01 01
00 00:
The time is displayed in 24 - hour
clock format.

9
1
1. Preparation
Powering the Camera
zz
zz
zLoading the Battery
1. Check that the camera is turned off and slide the battery cover open.
2. Load the battery and close the battery cover.
zz
zz
zCharging the battery
1. Turn off the camera power.
2. Set the battery in the camera.
3. Connect the AC Adapter cable to the (DC IN) jack of camera.
4. Insert the power plug into a power outlet.
zThe LED on the front side will lit-on in Red. When the LED turn to
Green, charging is completed.
zz
zz
zUsing the AC Adapter
1. Make sure the camera power is turned off, then connect the AC
Adapter cable to the camera power (DC IN) jack.
2. Insert the power plug into a power outlet.
When a battery is located in the camera, power from the AC
Adapter (power outlet) will take priority.
zz
zz
zAuto Power Off Setting
The camera will turn off automatically in Record and Play modes to
conserve the battery if no operation is performed (no buttons are
pressed) for the preset length of time. You can select the time until the
auto power off is activated from Off, 1 min, 3 min, or 5 min, please see
page 25.
Note
Auto Power Off Setting can not be worked when using the AC Adapter
as power source.

10
Storage Media
This camera uses Internal Memory and Secure Digital (SD) Card as
storage media to record data.
zz
zz
zInternal Memory
The size of the Internal Memory is 16 MB.
zz
zz
zSecure Digital Memory Card
Insert the SD Memory Card
1. Check that the camera is turned off.
2. Slide the card cover switch in the
direction shown by the arrow andopen
the card cover.
3. Insert the card with the label facing toward you.
zRemoving the SD Memory Card
1. Check that the camera is turned off
2. Slide the card cover switch to open the
card cover.
3. Push the card and then pull it out.
zAbout Memory Card
You are recommended to use only SD Memory Card. If you using an
MMC (Multi-Media Card), the following points shoule be noted.
1. You can not record motion pictures.
2. The processing speed is slow.
On account of the above limitations, we cannot guarantee operation of
MMC.

11
1
zFormatting the Internal Memory and
SD Memory Card
1. Set the mode dial to [ SET UP ].
2. Press the Sor Tbutton to select [ FORMAT ] and press the
RIGHT button.
3. Press the Sor Tbutton to select [ CARD ] or [ Internal ] and
press the [ENTER ] button.
4. Press shutter release button.
z[ FORMATTING ] message will display. The screen will return to
SET UP menu when the formatting is completed.

12
2. Recording
Basic Recording
1. Turn on the camera.
zSlide the power switch to turn on the camera.
2. Set the mode dial to [ , , or ].
3. Select the PIC (image quality) mode.
zPress the PIC button to select the image quality mode.
zIn Continuous Mode, Image Enlargement Mode and Non-com
pressed Mode can not be chose.
zPIC button does not work to Motion Picture Mode.
4. Compose the picture.
zPress button to make the subject larger and the button
to make the subject smaller
5. Record the image.
zPress the shutter release button halfway to lock the focus, and
then press the shutter release button fully without releasing it.
zIn continuous Mode, you need to keep pressing the shutter release
button.
zIn motion Mode, there will be messages of
start : Release / stop : Release.
zz
zz
zImage Enlargement
Used for taking pictures with higher image quality. Pictures can
be taken at a size of 2848 x 2136 pixels.
1. Set the mode dial to [ ].
2. Press the PIC button to selsct 2848 x 2136.
3. Compose the picture.
4. Press shutter pelease button to record the image.
zZoom Playback does not work for the Image Enlargement mode.

13
Recording Capacities
Mode / PIC Mode 16MB 32MB 64MB
2848x 44
2048 x 1536F1021 44
Still N
(No. of NC1 2
Images) 1600 x 1200 N
1280 x 960 N
Motion Picture (min:sec) 1:10 2:49 5:10
Using the Flash
1. Set the mode dial to [ ].
2. Press the button to select a flash mode.
You can choose from four flash mode: Flash Off, Auto, Forced
Flash, and Slow Synchro.
Flash can not be used in Continuous Mode and Motion Mode.
3. Press the shutter release button to record the image.
Menu Function
Use button to select funtion and
Exposure Compensation :
The exposure can be compensated to intentionally brighten or darken
the overall recorded image. The exposure compensation range is
2.0EV ( set in 0.5EV / step ).+/-
1. Set the mode dial to [ , , or ] and press MENU button.
press ENTER button.
21 N 1
0
36 21
44
91
5
33
71
146
49
106
219
2
20

14
2. Check that has been selected and press ENTER button.
3. Press Sor Tbutton to select the compensation level and press
ENTER button.
4. Press shutter release button.
zz
zz
zWhite Balance :
The white balance can be adjusted so that images can be recorded in
natural colors no matter what light source the subject is exposed. There
are 5 modes can be chose: Auto (default and no display), Daylight ( ),
Overcast ( ), Tungsten Light ( ), and Fluorescent Light ( ).
1. Set the mode dial to [ , , or ] and press MENU button.
2. Check that has been selected and press ENTER button.
3. Press Sor Tbutton to select the white balance and press ENTER
button.
4. Press shutter release button.
zMacro Mode :
1. Set the mode dial to [ , , or ] and press MENU button.
2. Check that [ ] has been selected and press ENTER button.
3. Press Sor Tbutton to select [ ON ] and press ENTER button.
4. Press shutter release button.
zSelf-Timer :
1. Set the mode dial to [ ] and press MENU button.
2. Check that [ ] has been selected and press ENTER button.
3. Press Sor Tbutton to select [ ON ] and press ENTER button.
4. Press shutter release button.
zThe Self-Timer LED will start flashing (with beep sound) and the
shutter will be released with approximate delay of 10 seconds.

15
2
Other Advance Menu Functions
In MENU, user can set the following functions:
Focus: can be set in Still, Continuous, and Motion Picture Mode
Date Imprint: can be set in Still and Continuous Mode
ISO: can be set in Still and Continuous Mode
Red-eye Reduction: can be only set in Still Mode
Time Exposure: can be only set in Still Mode
zMethods to set
1. Set the mode dial to [ , , or ] and press MENU button.
2. Press Xto select and press ENTER button.
3. Press Sor Tbutton to select a function you want to set and press
Xbutton.
4. Press Sor Tto change the function and press ENTER button to
complete the setting.
zPress CANCEL button to exit the operation.
Important
Be sure the card door is closed when there are a message of
"RECORDING", "COPYING" or file is reading in Recording, Set Up, or
Playback Mode as this colud result in loss or damage of data stored on
the card / Internal Memory, or malfunction of the camera.

16
3. Playback / Delete
Basic Playback
zPlaying Still Picture / Continuous Files
1. Set the mode dial to [ ].
2. Press Wor Xbutton to select the file to be played back.
Press Wbutton to display the previous file and Xto display next
file. If keep the button pressed, the file will advance continuously.
zPlaying a Motion Picture File
1. Set the mode dial to [ ].
2. Press Wor Xbutton to select the motion picture file.
3. Press shutter release button.
The motion picture file will be played back and the playback
indicator and time elapsed will be displayed. Playback of motion
picture files ends automatically.
zTo pause and resume playback
To temporarily pause playback, press the shutter release button
during playback, and to resume playback, press the shutter
release button again.
zSlow playback
To play a file slowly, press Xbutton during playback.
Attention :
zIf an unplayable is encounted, the “UNMATCHED FILE”
message will be displayed.
zIn some case, data recorded with the cameras of other
companies cannot be played back.

17
3
zPlaying File on a TV
zz
zz
zConnecting
1. Make sure the camera is turned off.
2. Open the Video Out Terminal cover and connect the Video Out
Cable to the terminal.
3. Connect the other end of the Video Out Cable to the Video-In
Terminal of the TV.
4. Connect the AC Adapter.
5. Play back the files.
Turn the camera on and set the mode dial to Playback Mode [ ].
zz
zz
zDisconnecting
1. Make sure the camera is turned off.
2. Disconnect the cable.

18
Various Playback Functions
Thumbnail Playback
This function enables user to play 9-file at once for quick searching.
1. Set the mode dial to [ ] and press the MENU button.
2. Press button to select and press ENTER button.
The screen will change to the thumbnail display.
Indicator Status
No Mark Still picture
Motion Picture File
? Unplayable File
3. Press , , , buttons to select file.
The file on which the focus is set is the
selected file.
4. Press ENTER button , the screen will return to single image
display.
Zoom Playback
1. Set the mode dial to [ ] and press the MENU button.
2. Press button to select and press ENTER button.
3. Press or button to change the magnification.
5/26
100-0005
1600
2002/07/15 11:25
5/26
100-0005
1600
2002/07/15 11:25
Note
Image of 2848 x 2136 can not be played back by using Zoom Playback
Function.