Roller Grill CT 3000 B Operation manual

INSTRUCTIONS FOR USE AND INSTALLATION
TOASTER CT 3000 B
Made in France
Made in FranceMade in France
Made in France
October 2014

TOASTER CT 3000 B
Congratulations for the acquisition of this upmarket appliance made in France. You
chose an appliance which allo s the best technical qualities with a big user-
friendliness. We wish ou the biggest contentment
1. SECURITY INSTRUCTIONS
Please respect these instructions scrupulousl to avoid an risk of fire, electric shock,
scald or other wounds and damage. During the use of this appliance, fundamental cir-
cumspection of securit must alwa s be noticed, such as:
- Take into account the instructions and keep it s stematicall with the appliance.
- Install the appliance alwa s in instructions respect. A 10 cm distance minimum
with the partition or the wall is necessar .
- Protect the appliance from direct light of the sun, frost and humidit .
- Never leave the appliance within the reach of children or disabled persons with-
out surveillance.
- Never move the appliance when it is working or when the surfaces of cooking
are still hot.
- Check that the appliance is definitel off before connecting it up or disconnect-
ing it.
- Do not touch the hot surfaces of the appliance. The temperature of the hot sur-
faces can be ver important when the appliance is working. Alwa s use control
knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the electrical cord in contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the appliance
- To avoid an electric shock, never plunge the appliance, the cord or plug in wa-
ter or quite other liquid.
- If the cord is harmed, it must be replaced b the producer, his after sale service
or persons of similar skills to avoid an risk.
- Entrust repairs onl to a skilled person.
- Use onl spare parts of origin.
- At the end of cooking, before cleaning the appliance, do not forget to disconnect
it.
2. CONTENTS OF CARDBOARD PACKAGING
Device: A toaster
Accessories: - A tra N° 2 (loading) + screws
- A tra N°1 (unloading) + screws
- Two small tra s
211

10
VUE
- A brush
- The present note
See exploded views for CT 3000 B at the end of the document
3. CONFORMITY OF USE
Use the appliance onl to toast bread, brioche, bagels, waffles, baguettes, bruschet-
tas, buns, small pizzas, quiches, panini...
4. WAY OF FUNCTIONING
Ideal for intensive use in baker , fast-food chains and franchises ! This conve or ov-
en with infrared quartz tubes (1050°C) cooks non-stop and with no preheating ever
kind of hot snacks : 1’30 min in ver ge !
This to ster en bles to rehe t viennoiseries in few seconds or to keep them
w rm th nks to the holed top tr y.
To turn on the toaster, just action the commutator (n°1 on picture) on the desired po-
sition (50% or 100 %). The orange pilot light (n°4 on picture) ignites. Turn on the
speed regulator knob (n°3 on picture) according to the desired cooking time (from 0
to 10).
Commutator On/off pilot light
Speed regulator Control pilot light
Tra N°2 (loading)
3
2
43
5
1
2
4
3
5
1

5. FUNCTIONING / MANIPULATION
) Inst ll tion / ssembly:
- Unpack carefull the device of its packaging.
- Place it on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible mate-
rials even if it is ver well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessar .
- Never plug the to ster on multi socket d ptor.
- Plug the to ster on 16A plug minimum.
- Never expose the plug to he ting source.
b) First st rting:
During the first use, warm our machine up outside to evacuate residual smokes of
manufacturing oil from the metallic parts. This ma emit a slight smell for a few mo-
ments.
First cleaning
Clean the device before the first use. (See 6. Cleaning)
Connection of the device
- Check that the tension and the frequenc of the electricit network suit to the val-
ues indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged. If necessar , it has to be
replaced b the manufacturer, its after sale service or an qualified person to avoid
an risk.
- Make sure that ever control knob is positioned on 0.
- Unwind completel the electric power cable and connect it in a plug connected
with the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directl on
the electricit network, confide its connection to a qualified person .
4
9
SCHEMA

Exclusion cl uses of the gu r ntee
B d inst ll tion nd b d m inten nce, in p rticul r if they do not respect cur-
rent regul tions or instructions ppe ring in this user guide.
Cannot benefit from the guarantee the repairs required as a result of false opera-
tions, of inappropriate use, of carelessness or of excess loads of the device, as well
as those resulting from variations of the power suppl , over tension or from defective
installations.
The damage due to shocks, bad weather is not flatware b the guarantee. The mate-
rial travels at the risks of the user; in case of deliver b carrier, the consignee has to
have reservations towards the carrier before an deliver of the device.
The guarantee comes to an end in case of intervention, of repair, of modification b
no qualified persons, or of use in inappropriate purposes.
8
c) Use of device :
Elements of command and display
Putting on
Turn on the commutator (n°1 on picture) on the wished position according to the
desired power.
The control pilot light (n°4 on picture) ignites.
Turn on the speed regulator knob (n°3 on picture) according to the desired cook-
ing time
Temperature setting
Set the power desired b positioning the commutator (n°1 on picture) to the
wished position.
Stopping the appliance
Set the commutator (n°1 on picture) on 0.
Set the speed regulator (n°3 on picture) on 0.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
d) Bre kdown / rep ir:
In case of breakdown or of damaged part, please call our after-sales service and
confide an technical operation to qualified person.
When ou contact the after-sales service of our distributor or our store, give him
the complete reference of our device (commercial name, t pe and serial number).
This information appears on the visible descriptive plate behind the device.
Comm nd/Displ y Function
Commutator 4 positions
(n° 1 on picture) :
Position 0
Position 50%
Position 100%
Stop
All the tubes warm (half power)
All the tubes warm (full power)
Orange pilot light (n°4 on
picture)
Machine is on
Speed regulator (n°3 on
picture)
Minimum to maximum power
Green pilot light (n°2 on
picture)
On/off
5

6. CLEANING AND MAINTENANCE
- Disconnect the device.
- Let cool completel the device before an technical intervention or cleaning.
- Take the croissants support off the top of the oven.
- Remove the loading and unloading tra s (front and back) to wash them in he dish-
washer.
- Brush the grid with the supplied brush.
- Clean the top and the external surfaces of the oven with a soft cleaning product. Do
not spra the cleaning product directl on the stainless steel but use a dish mop. Let
act 5 min. Rinse the dish mop into clear water and sweep it on all the outside walls.
Let dr .
- Never clean the quartz tubes when the are hot
- Avoid touching quartz tubes with our fingers but use a cloth moistened with spirit.
- Clean regularl the external walls of our device with warm water and wash liquid:
avoid the abrasive towelling. Rinse our device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable wa .
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid an electric shock.
- During a prolonged non-use, we recommend ou strongl to keep the device shield-
ed from the humidit .
7. TECHNICAL SPECIFICATIONS
Wires colours correspondence Phase Brown/Black/Gre
Neutral Blue
Earth Yellow-Green
6
Model CT 3000 B
Outside dimensions 470x720x385 mm
Weight 22 Kg
Powe 3000 W
Nb of qua te tube 8
Cu ent 13 A
Voltage 220-240 V ~
The equipotential connection marked b this s mbol must be linked with
the equipotential conductive connection of our installation b means of a minimum
conduction of a 2.5 mm² section.
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-48
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002/96/CE (DEEE) N°34270064800021
2002/95/CE (ROHS)
2066/95 CE
2004/108 CE
Re ch rule
Never put the device among household waste.
The device must be put down in a centre of rec cling for the electric equipments.
The materials of the device are indeed reusable. B eliminating correctl the electric
and electronic wastes, the rec cling and quite other shape of re-use of worn equip-
ments, ou participate in a significant wa in the environmental protection.
For an information about the collection of electric and electronic waste, please con-
tact our distributor.
10. GUARANTEE
Conditions of gu r ntee
The guarantee applicable to an device is the commercial guarantee of the distributor
or the retailer. Please contact the store where ou bought our device to know the
precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee
planned b articles 1641 and following ones of the Civil code relative to the defects
and the latent defects.
7