RollSeal RS-500 Series User manual

Part No 4801-5158 Rev 1-2017 Owners Manual RS 500/600 Series Doors
RS-500/600Doors
TroubleshootingGuide
RollSeal
1733 County Road 68
Bremen, Alabama 35033
256-287-7000

Page 2 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
Table of Contents
1Warnings (Avertissements)....................................................................................................................................3
2Limited Warranty...................................................................................................................................................8
3Introduction............................................................................................................................................................9
4How the SC-325 & SC-650 Controllers Communicate with the RollSeal RS-500/600 Door..............................10
5SC-325 V1 Controller Layout..............................................................................................................................11
6SC-325 V2 Controller Layout..............................................................................................................................12
7SC-650 V1/V2 Controller Layout........................................................................................................................13
8Troubleshooting Flowchart..................................................................................................................................14
9Unknown Position Indication...............................................................................................................................16
10Obstructed LED ...................................................................................................................................................16
11Error Codes..........................................................................................................................................................17
12Adjustment of Brake............................................................................................................................................21
13Jog Mode..............................................................................................................................................................22
14SC-325 & SC-650 Drive Diagnostics LEDs........................................................................................................22
15Switch Testing......................................................................................................................................................23
15.1Directional Switch Input...........................................................................................................................23
15.2Sequential Switch Input Test and Manual (Single) Switch Input Test.....................................................24
15.3Timed Switch Input Test...........................................................................................................................24
16Direction SWX Test.............................................................................................................................................25
16.1Open Direction Test..................................................................................................................................25
16.2Close Direction Test.................................................................................................................................26
16.3Stop Position Test.....................................................................................................................................26
16.4Sequential SWX Test and Manual Position Test......................................................................................26
16.5Timed Direction Test................................................................................................................................26
17Adjusting the Home, Safety, and Leading Edge Switches...................................................................................27
17.12005 and Earlier Switch Adjustment........................................................................................................28
17.22006 and Later Switch Adjustment...........................................................................................................29
18Brake Relay Test..................................................................................................................................................30
18.2Brake Rectifier..........................................................................................................................................32
19Emergency Egress (Optional Feature) .................................................................................................................34
19.1Resetting Egress........................................................................................................................................34
19.2Egress Bracket Removal...........................................................................................................................35
19.3Egress Bracket Installation .......................................................................................................................35
19.4Egress Alarm Activation Troubleshooting ...............................................................................................35
20RollSeal Automatic Door Wiring Diagram..........................................................................................................36
21RollSeal Smart Controller Wiring Diagram.........................................................................................................37
21.1Warning Light Control Wiring .................................................................................................................38
21.2Interlocking Two Automatic Doors..........................................................................................................38
22RollSeal CMS (Condensation Management System) Wiring Diagram................................................................39
23Optional Accessory Wiring..................................................................................................................................39
23.1Falcon XL and EX Motion Sensors..........................................................................................................39
23.2Falcon IS40 Infrared and Microwave Sensor ...........................................................................................40
23.3IRIS Infrared and Microwave Sensor.......................................................................................................40
23.4Matrix2 Loop Sensor................................................................................................................................41
24Switches and Remote Receiver............................................................................................................................42
24.1Controller and Brother Motor...................................................................................................................42

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 3
1Warnings (Avertissements)
Warning!
Disconnect All Power Sources Before Installing This Equipment. Failure To Disconnect
Power Source Can Result In Property Damage, Serious Injury Or Death!
Warning!
Dangerous Rotating Machinery!
Keep Hands, Clothing, Etc. Clear When Operating!
Do Not Operate Without All Guards And Covers In Place!
Warning!
All Wiring Should Be In Accordance with National Electrical Codes Or Other Local Codes.
Warning!
The Installer Is Responsible For Complying With All Relevant Regulations,
Such As National Wiring Regulations And Accident Prevention Regulations.
Particular Attention Must Be Given To The Cross-sectional Areas Of Conductors, The
Selection Of Fuses Or Other Protection, And Protective Earth/Ground Connections!
Warning!
The Voltages In The Power Cables And Certain Parts Of The Drive Can Result In Death.
Whenever The Drive Has Been Used, It Must Be Isolated And Disconnected
For 5 Minutes Before Any Work Commences.
!
!
!
!
!
!
!
!

Page 4 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
Danger!
Only Qualified Electrical Personnel Familiar With The Construction And Operation Of This
Equipment And The Hazards Involved Should Install, Adjust, And/Or Service This Equipment.
Read And Understand This Manual In Its Entirety Before Proceeding.
Failure To Observe This Precaution Could Result In Severe Bodily Injury Or Death!
Warning!
IMPORTANT INSTALLATION INSTRUCTIONS
Warning!
To Reduce The Risk Of Severe Injury Or Death:
1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2. Do not connect the door operator to the source of power until instructed to do so.
3. Locate the control station: (a) within sight of the door, (b) at a minimum height of 5 feet
so small children cannot reach it, and (c) away from all moving parts of the door.
Remove all ropes and remove or make inoperative all locks connected to the garage
door before installing opener.
4. For products having a manual release, instruct the end user on the operation of the
manual release. Where possible, install the door opener 8 feet or more above the floor.
For products having an emergency release, mount the emergency release within reach,
but at least 6 feet above the floor and avoiding contact with vehicles to avoid accidental
release.
!
Item 4501-6312
(Warning Moving Door Label)
Supplied With Door,
MUST Be Installed
On Inside Of Cooler/Freezer
Beside Door Opening.
!
!
!

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 5
IMPORTANT SAFETY INSTRUCTIONS
Warning!
To Reduce The Risk Of Severe Injury Or Death:
1. READ AND FOLLOW ALL INSTRUCTIONS!
2. Never let children operate or play with door controls. Keep the remote control (where
provided) away from children.
3. Personnel should keep away from a door in motion and keep the moving door in sight
until it is completely closed or opened. NO ONE SHOULD CROSS THE PATH OF A
MOVING DOOR.
4. Test the door’s safety features at least once a month. After adjusting either the
speed or the limit of travel, retest the door operator’s safety features. Failure to
adjust the operator properly may cause severe injury or death. NEVER GO UNDER
A STOPPED, PARTIALLY OPEN DOOR.
5. For products having a manual release, if possible, use the manual release only when
the door is closed. Use caution when using this release when the door is open.
6. KEEP DOORS PROPERLY OPERATING AND BALANCED. See Door
Manufacturer’s Owner’s Manual. An improperly operating or balanced door can
cause severe injury or death. Have trained door systems technician make repairs to
cables, spring assemblies, and other hardware.
7. Install the Entrapment Warning label next to the control button in a prominent
location. Install the Emergency Release Marking. Attach the marking on or next to the
emergency release.
8. After installing the opener, the door must reverse when it contacts a 1-1/2 inch high
object (or a 2 x 4 board laid flat) on the floor.
9. SAVE THESE INSTRUCTIONS.
French Translated Warnings
Avertissement!
Disjoindre fournissent de l'énergie tout les sources avant qu'installer cet équipement.
F|ailure| à disjoindre la source de pouvoir peut résulter dans dommage de propriété,
blessure sérieuse ou mort !
Avertissement !
Mécanisme tournant dangereux !
Garder les mains, vêtissant, etcC|lear| quand fonctionner !
Ne fonctionnez pas sans toutes gardes et couvertures dans lieu !
!
!
!
!
!

Page 6 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
Avertissement !
Tout montage sur fil de fer doit être selon codes électriques nationaux ou autres
indicatifs régionaux.
Avertissement !
L'Installer est responsable pour conformer avec tout règlement pertinent, telles que
règlement et règlement de prévention d'accident de montage sur fil de fer nationaux.
Pl'attention articulaire doit être donnée pour les aires sectionnelles transversales de
conducteurs, le choix d'elles fusées ou autre protection, et terre / prises de terre
protecteur !
Avertissement !
Les tensions dans le pouvoir câblent et certains parties de la promenade en voiture
peuvent résulter dans la mort. Wle |henever| la promenade en voiture a été utilisé il
doit être isolé et détaché pendant 5 procès avant que tout travail commence.
Danger !
Seulement familier électrique de personnel qualifié avec la construction et opération
de cet équipement et les hasards ont enveloppé devoir installer, arranger, et/ou - la
révision cet équipement. R|ead| et comprendre ce manuel en entier avant que
procéder. F|ailure| à observer cette précaution peut résulter dans dommage corporel
sévère ou mort !
Avertissement !
!
!
!
!
!
Point 4501-6312
(Avertissement Moving étiquette de porte)
Livré avec porte,
doit être installé à
l'intérieur du réfrigérateur / congélateur
côté Ouverture de la porte.
!

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 7
LES INSTRUCTIONS D'INSTALLATION
IMPORTANTES
AVERTISSEMENT!
À réduire le risque de blessure sévère ou mort:
1. LU ET SUIVENT TOUTES INSTRUCTIONS D'INSTALLATION.
2. Ne liez pas l'opérateur de porte per la source de pouvoir jusqu'à instruit faire ainsi.
3. Localisez la station de commande: (a) en vue de la porte, (b) à un minimum la hauteur de 5
pieds ainsi petit enfants ne peuvent pas l'atteindre, et (c) loin de tous parties en mouvement
de la porte.
4. Pour produits ayant un délivrance manuelle, instruire l'utilisateur final sur l'opération de la
délivrance manuelle.
RÈGLEMENTS DE SÉCURITÉ IMPORTANTS
AVERTISSEMENT!
À réduire le risque de blessure sévère ou mort:
1. LU ET SUIVENT TOUTES INSTRUCTIONS!
2. Jamais laisser fonctionner enfants ou mouvoir vivement avec les autorités de porte. Gardez la
télécommande (où a fourni) loin des enfants.
3. Le personnel devrait garder loin une porte dans mouvement et subsistance la porte en
mouvement dans vue jusqu'à est complètement fermé ou avoir ouvert. CES AUCUNS DOIVENT
CROISER LE CHEMIN D'UNE PORTE EN MOUVEMENT.
4. Éprouvez les traits de sécurité de la porte au moins une fois par mois. Après qu'arrangeant la
vitesse ou la fin de course, retest les traits de sécurité de l'opérateur de porte. Manque à
arranger l'opérateur correctement peut causer blessure sévère ou mort.
5. Pour produits ai manuel la délivrance, si possible, utiliser la délivrance manuelle seulement quand
la porte est fermée. Précaution d'utilisation à utiliser cette délivrance quand la porte est ouverte.
6. GARDER LES PORTES CORRECTEMENT QUI OPÈRE ET ÉQUILIBRÉ. Voir la porte fabricant
propriétaire manuel. Un improprement qui opère ou balancé porte peut causer blessure sévère
ou mort. Formez les technicien de systèmes de porte faitez les réparations per les câbles,
réunions de source, et autre quincaillerie.
7. SAUVEZ CES INSTRUCTIONS.
!
!

Page 8 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
2Limited Warranty
All products are warranted to be free from defects in material and workmanship for a period of one
(1) year or 100,000 cycles, whichever occurs first, from the date of purchase if installed and used
in strict accordance with the installation instructions. Liability is limited to the sale price of any
products proved to be defective or, at manufacturers’ option, to the replacement of such products
upon their return. No products are to be returned to the manufacturer, until there is an inspection
and/or a return-goods authorization (RGA) number is issued.
All complaints should be directed first to the authorized distributor who sold the product. If
satisfaction is not obtained or the name of the distributor is not known, write the manufacturer that
appears below, directed to the attention of Customer Service Manager.
This limited warranty is expressly in lieu of any and all representations and warranties expressed
or implied, including any implied warranty of merchantability or fitness for a particular purpose.
The remedy set forth in this limited warranty shall be the exclusive remedy available to any person.
No person has authority to bind the manufacturer to any representation or warranty other than this
limited warranty. The manufacturer shall not be liable for any consequential damages resulting
from the use of our products or caused by any defect, failure or malfunction of our products. (Some
areas do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.)
This warranty gives you specific legal rights and you may also have other rights that vary from area
to area.
Warrantor:
RollSeal
1733 County Road 68
Bremen, Al 35055
256-287-7000

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 9
3Introduction
Look over this manual to get familiar with the RS-500/600 Door and SC-325 & SC-650 Controllers before
troubleshooting. Begin troubleshooting with the Flow Chart provided. When starting with the Flow Chart, it is
assumed that the Controller has already been set up and the limits have been programmed. Programming
information can be found in the 4801-5156 Manual for the SC-325 & SC-650 Controllers. Also, the display in which
the Flow Chart refers to is the Display Indicator on the front of the SC-325 & SC-650 Controllers which is shown in
Diagram 3A.
Caution!
Any Electrical Troubleshooting Performed In This Guide
Should Be Performed By A Qualified Electrician.
The RollSeal SC-325 & SC-650 are Intelligent Controllers manufactured specifically for the RollSeal RS-500/600
Automatic Doors. The SC-325 & SC-650 Controllers will provide safe opening and closing of the door by using a
number of internal safety devices plus those features provided in the components of the RS-500/600 Door. The
SC-325 & SC-650 Controllers can control the opening and closing speeds of the door, count the number of door
operations, and provide status information for remote monitoring of the door position. In addition, the SC-325 &
SC-650 Controllers can combine a number of auxiliary devices to improve the operability of the RS-500/600 Door
such as:
Infrared sensors to detect the presence of personnel or machinery requiring passage through the door.
Remote radio controlled inputs for operating the door.
Auxiliary lights or alarms that operate in conjunction with door opening or closing.
The SC-325 & SC-650 Controllers are very versatile and simple to operate. The controls are easily operated from
the front panel.
*NOTE: In this Manual, the only difference shown between the SC-325 & SC-650 Controllers is
the model number as shown in Diagram 3A.
!
!
SC-325 & SC-650 Controllers
Powe
r
Switch
Display
Indicator
Main Fuse
*Model Number
SC-325 or SC-650

Page 10 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
4How the SC-325 & SC-650 Controllers Communicate with the
RollSeal RS-500/600 Door.
Inside the upper right housing of the RollSeal RS-500/600 Door is an Encoder that sends electrical pulses to the
SC-325 & SC-650 Controllers. When the door is moving, the Controller is in normal operating mode. (See Section
20 or Manual #4801-5156 for wiring diagram of the Encoder). The SC-325 & SC-650 Controllers refer to the
position of the door in units of “Counts”, which is based upon the number of encoded pulses that the Encoder sends
to the Controller.
NOTE: The term Position Units is used throughout this document and refers to the position of the
door in units of Counts.
A Count of zero is assigned to the full open position where the Home Switch operates, and the highest count is
assigned to the full closed position. The maximum number of Counts that the SC-325 & SC-650 will read depend
upon the particular installation. In general, a Count is approximately equal to 1/8 inch of door movement. Several
of the parameters of the SC-325 & SC-650 are displayed in units of Counts, such as the Actual Position, the Open
and Closed Limit Positions and the Acceleration and Deceleration Ranges.
RS-500/600 Door and Controller

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 11
5SC-325 V1 Controller Layout
WARNING!
Ensure The Drive
AC Selection
Jumper AND PCB
154 AC Selection
Switch Are Set
Accordingly
BEFORE Power Is
Applied To The
Controller.
!

Page 12 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
6SC-325 V2 Controller Layout
WARNING!
Ensure The Drive
AC Selection
Jumper AND PCB
154 AC Selection
Switch Are Set
Accordingly
BEFORE Power Is
Applied To The
Controller.
!

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 13
7SC-650 V1/V2 Controller Layout
WARNING!
Ensure The Drive
AC Selection
Jumper AND PCB
154 AC Selection
Switch Are Set
Accordingly
BEFORE Power Is
Applied To The
Controller.
!

Page 14 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
8Troubleshooting Flowchart
Looking at the SC-325 or SC-650,
What is shown on Display?
Unknown Position indication.
See Section 9
Press “Open” button to reset
the Actual Position
See Section 11
Check Egress Strap to ensure that the strap is in the correct
Limit Mark
p
osition and not
p
ulled out of
p
osition
Set Switch and Jumper.
Restart Flowchart.
Three Dashes
(---)
Alternates between Three Dashes and a
Numerical
(
178
)
Actual Position
Check incoming voltage at
L1-L2 to Motor Drive Board.
If voltage present, replace Drive Board.
If no voltage, check incoming power supply.
When trying to Jog Door,
what is the status of ST
LED? See Section 0.
Error Code
Yes
Yes
Is
the Power
LED on the Motor
Drive Board
steady
Green?
Will
the door run
in Jog Mode?
See Section
13.
Yes
A
Numerical
Actual Position
(718)
No
No
Yes
No
Has
the SWX2
Selection Switch
and Drive Selection
Jumper been set to
match incoming
voltage?
Go To
Page 15
Reset Egress Strap.
See Section 19

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 15
Troubleshooting Flowchart (cont.)
Remove
terminals for
Direction and
Sequential on door
assembly. Does the door
move in either
direction?
Will
the door run
in Jog Mode?
See Section
13.
Yes
Yes
Is
the
Obstruction LED
lit on the
Display?
Yes
Is
any item
or door panel
between door
Safety
Beams?
From
Page 14
When
does the
Obstruction
LED come
on?
While
Opened
While Closing
Adjust the Leading Edge
Switch. See Section 17.
Replace Control
Door Assembly
N
o
N
o
Perform
test in Sections
15 & 16. Does
door operate
properly?
Replace Control
Door Assembly
N
o
Will the
Obstruction LED
go out while
activating the
Leading Edge
Switch?
Check for short in Leading
Edge circuit.
If OK, replace
Control Door Assembly.
Adjust the
Leading Edge
Switch.
See Section 17.
Problem is in
Accessory Switches
added to the door.
N
o
Yes
Yes
Remove
item or
correct
door
panel.
Yes

Page 16 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
DC Harness Plug
Encoder
Actual Position
Open Speed
Close Speed
TotalCycles
Service Cycles
Door Obstruction
(Cycles 100)
Mode
- - -
Unknown Position Indication
Actual Position
Open Speed
Close Speed
TotalCycles
Service Cycles
Door Obstruction
(Cycles 100)
Mode
Up/Down Arrows
Mode
Safety Beam Obstructed
9Unknown Position Indication
There are occasions when the Controller may not know
the exact position of the door. For example, when
returning from the Jog Mode. In these cases the Display
Indicator will display a series of three bars as shown to
the right. This is known as the Unknown Position
Indication.
When the door is actuated, the door will proceed to the
full open position, however the speed of the door will be
reduced. When the door has returned from the Home
Switch position to the Open Limit position, the Display Indicator will show the Actual Position of the door. This
indicates that the door has reset its position and is ready for normal operation.
If the Door Encoder fails, the control will not be able to recognize the position of the door. This problem can also
arise from a loose or bad connection in the DC Harness. Check the DC Harness to insure it is connected properly
and that there are no loose wires in the connection to the Encoder.
10 Obstructed LED
The Obstructed LED is located
directly below the right side of the
Display Indicator. This light indicates
that there is an object detected by the
Safety Beam preventing the Door
from closing. Check for any items or
areas of the Door panel that may be
blocking the beam. Also see the
Troubleshooting Flowchart (Section
8) for more information.

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 17
11 Error Codes Mechanical Errors
Code Condition Panel Movement Problem Area Possible Solutions
EO1 Opening,
Home Switch Home Switch Try to activate door normally (open), should fix itself.
Use Jog Mode to lower door panel below Home
Switch. See Section 13
Manually release Brake and pull panel below
Home Switch. See Diagram 11A
Home Switch arm may be loose.
Retighten. See Section 17
EC1 Closing,
Home Switch Home Switch Lower Limit is not set correctly. Reset Door Limits.
Home Switch arm may be loose.
Retighten. See Section 17
Faulty connections, check DC Harness (Grey
Cable) at the door and the DC connections on
the PCB154.
See Diagram 11B & Diagram 11C
EO2 Opening,
Safety Switch Safety Switch Safety Switch arm may be loose. Retighten. See Section 17
Faulty connections, check DC Harness (Grey
Cable) at the door and the DC connections on
the PCB154.
See Diagram 11B & Diagram 11C
EC2 Closing,
Safety Switch Safety Switch Safety Switch arm may be loose. Retighten. See Section 17
Faulty connections, check DC Harness (Grey
Cable) at the door and the DC connections on
the PCB154.
See Diagram 11B & Diagram 11C
EO3 Opening,
Safety Switch Home & Safety Manually release Brake and pull panel below
Home Switch. See Diagram 11A
Check DC Harness connection, especially if
"Door Obstruction" LED is on.
See Diagram 11B
EC3 Closing,
Safety Switch Home & Safety Manually release Brake and pull panel below Home switch. See Diagram 11A
Check DC Harness connection, especially if
"Door Obstruction" LED is on. See Diagram 11B
Feedback Errors
Code Condition Panel Movement Problem Area Possible Solutions
EOF1 Opening,
Encoder
Fault
Up or
Down Encoder Check DC Harness, make sure optics are clean, inspect Encoder wire connections
in door J-Box and on PCB154 board.
See Diagram 11B & Diagram 11C
None Brake To prove the Brake is not releasing
automatically, disengage manual brake
release (See Diagram 11A) and attempt
to operate door. If it operates, one or
more of the following is the problem:

Page 18 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
Feedback Errors (Cont.)
Code Condition Panel Movement Problem Area Possible Solutions
EOF1 Opening,
Encoder
Fault
None Brake Check Brake Relay on PCB154 Control
Board. See Section 18
Brake Rectifier Check Brake Rectifier in motor.
See Section 18
Brake Assembly Make sure Brake is not adjusted too tight or
that the brake assembly is defective.
See Section 12
Egress Strap
Tension Pipe
Pockets
Drive Board
Check Egress Strap to ensure that the strap is
in the correct reset Limit Mark position and not
pulled out of position.
Ensure correct pipe location in panel pockets.
Inspect pipes for bends.
Ensure both PWR and ST LEDs are “ON”
steady See Section 0
ECF1 Closing,
Encoder
Fault
Up or Down Encoder Check DC Harness, make sure optics are
clean, inspect Encoder wire connections in
door's J-Box and on PCB154 Control Board.
See Diagram 11B & Diagram 11C
ECF1 None Brake To prove the Brake is not releasing
automatically, disengage manual brake
release (See Diagram 11A) and attempt to
operate door. If it operates, one or more of
the following is the problem:
Brake Relay Check Brake Relay on PCB154 Control
Board. See Section 18
Brake Rectifier Check Brake Rectifier in motor.
See Section 18
ECF1 Brake Assembly Make sure Brake is not adjusted too tight or
that the brake assembly is defective.
See Section 12
EOF2 Opening,
Direction
Fault
Up then
panel stops
and rolls
down a few
inches
Drive Overload
Trip If a Drive Overload occurs due to
over-current, over-voltage, or temperature
levels out of range, the drive may trip while
the door is opening.
Up Encoder Signal Wires (A, B) reversed.
See Diagram 11C
Drive Reverse two phases to the motor
Down Drive The Drive or the Gear Motor may not be
functioning.
Drive If the gear motor seems to be functioning,
then two phases to the motor must be
reversed.
Egress Strap Check Egress Strap to ensure that the strap is in the correct reset Limit Mark position and not
pulled out of position.
See Section 19

Part No 4801-5158 Rev 1-2017 RS500/600 Series Doors Page 19
Feedback Errors (Cont.)
Code Condition Panel Movement Problem Area Possible Solutions
ECF2 Closing,
Direction
Fault
Up Drive
Reverse two phases to the motor
Down Encoder Signal Wires (A, B) reversed.
See Diagram 11C
Disengage Brake
AC & DC Harness

Page 20 RS500/600 Series Doors Part No 4801-5158 Rev 1-2017
AC & DC Harness