Romina 11515 User manual

ASSEMBLY INSTRUCTIONS
FOR YOUR 11515 BED
20 Corporation Row, Edison, NJ 088 71
Phone [phone], Fax [phone]
www.rominafurniture.com
* READ ALL INSTRUCTIONS BEFORE ASSEMBLING
BED. KEEP INSTRUCTIONS FOR FUTURE USE.
* NEVER USE PLASTIC SHIPPING BAGS OR OTHER
PLASTIC FILM AS MATTRESS COVERS BECAUSE
THEY CAN CAUSE SUFFOCATION.
WARNING: THE PROPER USE OF THIS CRIB IS IMPORTANT FOR
YOUR BABY'S SAFETY. TO KEEP YOUR BABY SECURE AND SAFE,
AND TO AVOID POTENTIAL INJURY OR DEATH, CAREFULLY READ
AND FAMILIARIZE YOURSELF WITH ALL WARNINGS, CAUTIONS AND
INSTRUCTIONS IN THE INSTRUCTION BOOKLET. KEEP THIS
INSTRUCTION BOOKLET FOR FUTURE USE.
NOTE: THE STYLE OF YOUR BED
MAY VARY FROM WHAT IS PICTURED
IN THE INSTRUCTION SHEET
this picture shows how your bed
should look like after completing assembly

printed in full size
32
4
11515 BOX CONTENT
Please locate and confirm that
you have the following parts:
HB. headboard = 1
BF. bed frame = 1
OL. oblique legs = 4
straight legs = 2SL.
and one bag of hardware with the following:
Allen wrench =1. 1
2. Allen bolt (15mm - 9/16" - w/o centering tip) = 2
Allen bolt (20mm - 3/4" - w/o centering tip) = 103.
4. Allen bolt (50mm - 1 15/16") = 4
Required tools:Allen wrench (supplied)
CAUTION: Do not use a power screwdriver which can
cause screws to break or strip.
Note: The letters which
identifies a part are the
initials of the respective
part name (such method
is employed to facilitate
parts recognition
between the drawings
and the parts list).
Note: During the assembly process whenever using screws or
bolts, check each by placing the screw / bolt on the hardware
diagram which is drawn in actual size. Be sure to use the proper
size and shape specified in the instructions. Be sure to
COMPLETELY TIGHTEN the screws / bolts when you are
asked to do this.
Note: The item number of your product is
located on the inner side of the bed frame,
on a black and white label. Please, refer to
this number in the event that you need to
call ROMINA FURNITURE or your local
distributor. Thank you.
NOTE: THE STYLE OF YOUR BED
MAY VARY FROM WHAT IS PICTURED
IN THE INSTRUCTION SHEET
HB
BF
SL
OL
1

FIGURE 1
STEP 1 (Two adults are required to complete this step)
Attach the headboard to the bed frame using four bigger(HB) (BF)
Allen bolts and theAllen key.(4)
Do not completely tighten the bolts at this step, you will be asked to
do this later.
4x 4
REQUIRED
4
4
4
4
BF
HB

FIGURE 2
STEP 2 (Two adults are required to complete this step)
Turn the bed with the side with no drawers on the floor, taking care not
to scratch its finish.
Attach the oblique legs to the bed using ten medium Allen bolts(OL)
(3) (2), two smaller Allen bolts and the Allen key. Take care to insert the
smaller Allen bolts in the straight corners of the metallic triangles(2)
from the headboard side!
Completely tighten 10 (3) bothall medium Allen bolts and smaller
Allen bolts used before.(2)
Insert the straight legs into the metallic inserts found in the middle(SL)
beam of the bed. The straight legs of the bed are a little shorter than the
oblique ones so you can adjust their vertical position by screwing or un-
screwing them.
Turn the bed in its normal position, taking care not to scratch its finish.
Completely tighten 4 (4)all bigger Allen bolts used to attach the
headboard.
REMINDER
You have to completely tighten Allen bolts distributed as following:16
- bigger bolts in the headboard;4 (4)
- medium bolts in the oblique legs;10 (3)
- smaller bolts in the backside oblique legs.2 (2)
REQUIRED
WARNING!
COMPLETELY TIGHTEN!
SL
OL
SL
OL
OL
OL
32
3
33
2
3
3
3
3
3
3
3x 10 2x 2

GENERAL FURNITURE CARE TIPS
· Wood, like any natural material is likely to present variations of grain and texture which will result in
slight color variations or richness in the finish. These differences make each Romina Furniture item as
beautiful and unique as you and your baby are.
· To preserve the initial appearance and functionality of your furniture, it is recommended that all furniture
items be used in accordance with their intended design.
· Special water-based finishes are used to make this furniture safe for your baby. These finishes may be
more delicate than those used on adult furniture thus requiring careful maintenance.
· Constant rubbing or mechanical interaction with sharp/hard objects such as belt buckles, jeans' zippers
or buttons will likely damage the finish on your furniture. When placing or retrieving items onto the furniture,
always set them down and pick them up, do not “slide” them. Items placed onto the horizontal surfaces
must be moved/rotated to prevent discoloration in the finish.
· Exposure to extreme variations of environmental conditions such as humidity and temperature can
affect the finish quality due to wood sudden expansion or shrinkage. It is recommended that the room
temperature be maintained in between 65 and 75 degrees Fahrenheit and a relative humidity of 35 – 40 %.
Do not place items which are too hot or too cold directly onto the finished surfaces!
· Use caution when using a humidifier or vaporizer. Excessive moisture is harmful to the furniture causing
the finish to peel and the wood to warp.
· Wipe up spills promptly. If water or other liquids stay in contact with the furniture for a long period of time,
they can cause the finish to turn white or discolor. Alcohol or solvent containing substances or materials will
permanently damage the finish.
· In general, furniture should not be placed in front or too close to air-conditioning outlets, fireplaces,
heaters or humidifiers. Direct sunlight and ultraviolet rays will cause colors to fade, affect the luster and
smoothness of the finish and in most cases may cause hairline cracks in the finish. White finishes will
yellow naturally over time; exposure to direct sunlight will accelerate this natural process. Please note that
all wood essences will darken over time along with the natural aging process which is not considered to be
a quality defect.
· To clean the furniture, use a damp cloth immediately followed by wiping with a dry cloth. Do not allow
water to stay in contact with the finish as it will damage the finish.
· If you need to put your furniture into storage for any period of time, avoid placing it in damp basements or
hot attics. Air flow around and under the furniture should be allowed. Do not place furniture too close to
walls, do not stack anything on it and do not cover it entirely.
· When using a vinyl changing pad or similar plastic accessories, make sure to use a fabric felt
underneath. Certain plastics have ingredients that can react with and damage the finish. It is
recommended to rotate the changing pad's position frequently to avoid finish discoloration.

Regular cleaning with mild soap on a soft cloth, followed by a clean damp
cloth, then a dry cloth, will preserve the original luster and beauty of the
fine finish of your Romina Furniture product.
Visit
www.rominafurniture.com
for updates, special offers and more new designs.
Team
Thank you for being one of our distinguished clients.
Furniture