Romina 7515 User manual

www.rominafurniture.com
ASSEMBLY INSTRUCTIONS
FOR ANTONIO & CLEOPATRA TWIN SIZE BEDS
IMPORTANT:
PLEASE, READ ALL INSTRUCTIONS BEFORE ASSEMBLING!
PLEASE, SAVE INSTRUCTIONS FOR FUTURE USE.
THE STYLE OF YOUR BED / RAILS / ACCESSORIES MAY VARY
FROM WHAT IS PICTURED IN THE INSTRUCTION SHEET
65157515

7
Antonio & Cleopatra twin beds box content:
HB headboard = 1
LPFB low profile footboard = 1
BR bed rails = 1 + 1
SL group of support slats
assembled with textile ribbons = 2
WO wooden ornament = 2 + 2
HK twin bed hardware kit = 1
Antonio & Cleopatra twin bed hardware kit:
1. Allen bolt (100 mm - 4") = 4
2. Allen bolt (40 mm - 1 5/8” ) = 8 w/o centering tip
3. barrel nut = 4
4. wood screw (35 mm - 1 3/8") = 8
5. Allen key = 1
6. screw-in dowel (cam stud) = 4
7. eccentric connecting fitting (cam lock) = 4
5
4
Phillips screwdriver (not supplied)
6
Notes:
The letters which identifies a part are the
initials of the respective part name (such
method is employed to facilitate parts
recognition between the drawings and the
parts list).
The item number of your product is located
on a black and white label. Please, refer to
this number in the event that you need to call
ROMINA FURNITURE or your local
distributor. Thank you.
WARNING!
Be sure to COMPLETELY TIGHTEN the
screws / bolts when you are asked to do so.
Required tools:
Allen wrench (supplied), Phillips screwdriver (not
supplied).
CAUTION:
Do not use a power screwdriver which can cause screws
to break or strip
SL
1
2
3
BR
WO

STEP 2 (for all ANTONIO & CLEOPATRA twin beds)
Insert the metallic hooks attached at the ends of the bed rails into the
slots provided in the footboard's legs, so the hooks will catch the inner
metallic pins. Make sure that both bed rails are firmly attached to the
footboard (LPFB).
Completely tighten all four bigger Allen bolts.
STEP 1 (for all ANTONIO & CLEOPATRA twin beds)
Attach the the bed rails (BR) to the headboard (HB) using 4 bigger Allen
bolts (1) and 4 barrel nuts (3). Make sure that the wood brackets attached
to the bed rails faces towards the inside of the bed.
Align the straight slots in the head of the barrel nuts horizontally. You can
adjust the position of the barrel nut with a flat head screwdriver (not
supplied) or a coin.
Push the Allen bolts through the headboard and into the bed rails. Start
the thread by hand to assure you don't strip the threads then use the
supplied Allen wrench.
Do not completely tighten the bolts at this step, you will be asked to do so
later. 6
1
1
1
1
2
2
2
2
2
6
6
7
7
7
3
3
3
3
FIGURE 1
2
please see the
detailed view on
the next page
HB
FB
BR
BR
WO
WO
WO
WARNING!
COMPLETELY TIGHTEN!
LPFB
REQUIRED
0+
-
assembly tip

STEP 3 (for all ANTONIO & CLEOPATRA twin
beds)
Using all eight smaller Allen bolts (2), all four cam studs (6)
and all four cam locks (7) attach the wooden ornaments
(WO) to the bed rails (BR) and to the end panels (HB) &
(LPFB), following the next steps:
A) using a Phillips screwdriver (not supplied) or just the
hand insert a cam stud (6) in one crib’s foot (please see the
assembly tip);
B) insert the cam lock (7) into the inner face hole of the
wooden ornament, taking care that the little arrow of the cam
is pointing to the wooden ornament’s vertical side;
C) attach the wooden ornament (WO) to the end panel (HB)
or (LPFB), inserting the cam stud into the hole found on the
wooden ornament’s vertical side;
D) insert two smaller Allen bolts (2) starting the thread by
hand. Do not completely tighten the bolts at this moment,
you will be asked to do this later. Adjust the position of the
wooden ornament to follow the lines of the crib’s foot by
slightly moving the ornament then, using the supplied Allen
key and moderate force, slightly rotate the cam lock
clockwise (see the cam’s rounded arrow) by about 90 deg to
120 deg until become tight. You don’t need to over-tight the
cam! Again, using the supplied Allen key and moderate
force, completely tighten the smaller Allen bolts (2).
Repeat the above steps (A-D) for the rest of the three
wooden ornaments.
FIGURE 2 (detailed view of FIGURE 1)
6
2
3
7
WO
BR
2
3
little
arrow
r
o
u
n
d
e
d
a
r
r
o
w
0+
-
assembly tip

STEP 4 (for all ANTONIO & CLEOPATRA twin beds)
Place the support slats (SL) onto the wood brackets attached to the bed rails. Position the
support slats evenly between the bed ends. Make sure you firmly attach the support slats to
the wood brackets using all eight wood screws (4). Use a Phillips screwdriver (not supplied)
to completely tighten the wood screws.
After completing STEP 4, your bed should look like one of the beds depicted on the first
page of this instruction booklet.
4
HB
FB
BR
SL
SL
4
4
4
4
4
4
4
FIGURE 3
WARNING!
COMPLETELY TIGHTEN!
LPFB

GENERAL FURNITURE CARE TIPS
· Wood, like any natural material is likely to present variations of grain and texture which will result in
slight color variations or richness in the finish. These differences make each Romina Furniture item as beautiful and unique as you and your baby are. · To preserve the initial appearance and functionality of your furniture, it is recommended that all furniture
items be used in accordance with their intended design.
· Special water-based finishes are used to make this furniture safe for your baby. These finishes may be
more delicate than those used on adult furniture thus requiring careful maintenance.
· Constant rubbing or mechanical interaction with sharp/hard objects such as belt buckles, jeans' zippers
or buttons will likely damage the finish on your furniture. When placing or retrieving items onto the furniture,
always set them down and pick them up, do not “slide” them. Items placed onto the horizontal surfaces
must be moved/rotated to prevent discoloration in the finish.
· Exposure to extreme variations of environmental conditions such as humidity and temperature can
affect the finish quality due to wood sudden expansion or shrinkage. It is recommended that the room
temperature be maintained in between 65 and 75 degrees Fahrenheit and a relative humidity of 35 – 40 %.
Do not place items which are too hot or too cold directly onto the finished surfaces!
· Use caution when using a humidifier or vaporizer. Excessive moisture is harmful to the furniture causing
the finish to peel and the wood to warp.
· Wipe up spills promptly. If water or other liquids stay in contact with the furniture for a long period of time,
they can cause the finish to turn white or discolor. Alcohol or solvent containing substances or materials will
permanently damage the finish.
· In general, furniture should not be placed in front or too close to air-conditioning outlets, fireplaces,
heaters or humidifiers. Direct sunlight and ultraviolet rays will cause colors to fade, affect the luster and
smoothness of the finish and in most cases may cause hairline cracks in the finish. White finishes will
yellow naturally over time; exposure to direct sunlight will accelerate this natural process. Please note that
all wood essences will darken over time along with the natural aging process which is not considered to be
a quality defect.
· To clean the furniture, use a damp cloth immediately followed by wiping with a dry cloth. Do not allow
water to stay in contact with the finish as it will damage the finish.
· If you need to put your furniture into storage for any period of time, avoid placing it in damp basements or
hot attics. Air flow around and under the furniture should be allowed. Do not place furniture too close to
walls, do not stack anything on it and do not cover it entirely.
· When using a vinyl changing pad or similar plastic accessories, make sure to use a fabric felt
underneath. Certain plastics have ingredients that can react with and damage the finish. It is
recommended to rotate the changing pad's position frequently to avoid finish discoloration.

Page intentionally left blank.

Regular cleaning with mild soap on a soft cloth, followed by a clean damp
cloth, then a dry cloth, will preserve the original luster and beauty of the
fine finish of your Romina Furniture product.
Visit
www.rominafurniture.com
for updates, special offers and more new designs.
Team
Thank you for being one of our distinguished clients.