
CORDLESS PRESSURE WASHER
10
resulting from this:
- Do not work with damaged or incomplete equipment, or with equipment
that has been converted without the ap- proval of the manufacturer.
Before initial operation, have a specialist check that the required
electrical protection measures are in place.
- Do not use the device if import-ant parts such as the suction hose,
nozzles or the spray lance are damaged.
- Protect the pressure cleaner from frost and dry running.
- High-pressure hoses, ttings and couplings are important for
machine safety. Use only high- pressure hoses, ttings and couplings
recommended by the manufacturer.
- Use only original accessories and do not carry out conversion work on
the equipment. Please
- read the notes in the operating instructions on the topic of “maintenance
and cleaning”. Any measures above and beyond these, particularly
opening the equipment, are to be carried out by an author-ised electrician.
ELECTRICAL SAFETY:
CAUTION:
.TO AVOID ACCI- DENTS AND INJURIES FROM ELECTRIC SHOCKS:
- Before each use, check the equipment for damage.
- Wear sturdy footwear to protect against electric shock.
START-UP
In keeping with current regulations a pressure cleaner must never
be oper- ated off the drinking water mains supply without a controllable
back- ow preventer. A suitable backow preventer in conformity with
EN 12729 type BA must be used.
Water that has passed through a backow preventer is classied as
undrinkable.
A backow preventer is available in specialist shops.