Room essentials 249-05-0418 User manual

VideoinstructionasHelptoassembly,
scantheQRcodeandseethevideo.
DPCI # 249-05-0419 (Virginia Walnut)
92380 &
room essentials
4 Drawer dresser w/ door
DPCI # 249-05-0418 (Black Woodgrain)
>> assembly instructions
1

FREE!
WEWILLHELPYOU!
Do not go back to your store!
Missing or Damage Parts? Have Questions about Assembly?
The store where you made this purchase does not stock parts for this item.
If you needs parts (damaged or missing) or have questions about assembly,
please call our toll free support line. All orders normally ship within 24 hours.
Just call 1-855-MYTGTHOME (855-698-4846) for parts and service.
For faster service, have the style number and DPCI number ready
when calling.
2

before you begin
tools needed
Congratulations on your latest Target purchase
All you need to do is follow our simple instructions and you'll be on your way to transforming your
Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
room in no time. Good luck - though we're confident you won't need it.
Check for damaged or missing parts. Please call 1-855-MYTGTHOME (855-698-4846) for parts and service. Please reference1. DPCI # 249-05-0418 (Black Woodgrain)
DPCI # 249-05-0419 (Virginia Walnut)
Use the carton as a worksurface to prevent product damage during assembly.2. Gather all tools prior to assembly.3. Two people are required for assembly.4.
3

table of contents
Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
QUESTIONS?
2
3
5
6 - 7
8
9 - 32
33
34
35
customer service information
introduction
parts list
hardware
how to use the cam lock system
assembly
adjustment of hinge
specification sheet
information sheet
4

00590
00591
03087
06294
09732
E
F
G
H
I
L
T
W door left
shelf
top panel
bottom panel
right end panel
divider panel
left end panel
drawer front
back panel
drawer bottom
drawer back
left drawer side
right drawer side 4
4
4
4
2
4
1
1
1
1
1
2
1
ITEM DESCRIPTION QUANTITY
G
L
T
09732
09732
W F
T
I
H
E
00590
06294
03087
00591
5

x2
10601
x1
10901
x8
11042
x12
20203
x24
20228
25pcs
x2
23006
x8
25233
x11
23010
x6
25215
x16
25502
x18
26040
x5
26228
x18
31570
x18
31683
x3
50505
x5
81009
x2
91405
x2
96203
x5
26234
x5
32205
x2
25610
hardware
garment rod
holder cover
shelf pin dowel pin drawer fastener nails large head nails flat head screw
cam bolt
cam hinge handle L-plate stopper
long feet screw drawer screw short screw handle screw
short flat head screw
short feet screw
connector bolt
6

x1
72501
x1
94072
x4
41649
x5
65806
x2
94073
x3
52114
x1
88060
x1
97642
hardware
drawer glide
rectangular foot
garment rod
wall attachment strip stabilizer
door hinge
Warning label hex wrench
7

5
CORRECT NOT CORRECT
180°
123
46
how to use the cam lock system
8

CORRECT
NOT
CORRECT
x10
31683
x12
20203
Arrow
cam
2. Place the cams into the large holes on G, L and I, so that the arrow is facing the edge of the panel.1. Insert dowel pins into the small outer holes on the ends of the G,L and I.
step 1 case assembly - insert cams and dowel pins
dowel pin
finishedfrontedge
finishedfrontedge
G
L
I
finishedfrontedge
9

x3
50505
finishedfrontedge
F
3.
step 2 case assembly - insert hinges
Divide hinge by loosening the screw and split hinge part from each other.1. Place hinge into the correct holes on the left end panel.2. Tighten screws but do not over tighten.
hinge
10

x10
31570
x5
32205
finishedfrontedge
finishedfrontedge
F
L
I
finishedfrontedge
H
finishedfrontedge
step 3 case assembly - insert cam bolt
Screw cam bolts into the panels F, L and H, cam bolts must be screwed down.1. Tab short feet screw into panel I with a hammer.2.
cam bolt short feet screw
11

x16
26040
x8
25233
x4
41649
step 4 case assembly - attach drawer glides
Place drawer glider screws and flat head screw through the correct holes on the drawer slide into the holes on the panels G + H.1. Tighten screws but do not over tighten.2. Repeat this step for each of the remaining glides.3.
drawer glide
screw
G
H
drawer glide screwdrawer glide screw
flat head screw
flat head
screw drawer glide
12

x2
25215
x2
10601
short flat head screw
Screw the garment rod holder into the panels using short flat head screws.1.
step 5 case assembly - insert garment rod holder
finishedfrontedge
F
finishedfrontedge
G
garment rod holder
13

x1
97642
x2
25610
finishedfrontedge
finishedfrontedge
L
G
I
finished front edge
connector bolt
hex wrench
step 6 case assembly - attach top panel and bottom panel to divider panel
Place the cam bolts from top panel L into the holes on the divider panel G.1. Tighten cams.2. Use the hex wrench to install connector bolts into I and divivider panel G.3.
14

step 7 case assembly - attach left and right panel
Place the cam bolts from left and right end panels F and H into the holes on the top and bottom panels L and I.1. Tighten cams.2.
H
finished front edge
finished front edge
G
F
I
finishedfrontedge
L
finished front edge
15

x2
91405
x4
25215
L-plate
short flat head screw
finished frontedge
I
L
H
G
F
step 8 case assembly - attach L-plates
Use short flat head screw to attach L-plate to the right end panel H and in alignment with top panel L, place in center.1. Use short flat head screw to attach L-plate to the left end panel F and in alignment with top panel L, place in center.2.
16

x5
65806
x5
26234
together with short feet screw 32205, but be careful not to over tighten.
Place rectangular feet 65806 into the holes on the bottom panels I.1. Place the screws 26234 through holes and gently screw them onto the bottom panel. Make sure to fasten the screws2.
step 9 case assembly - attach rectangular feet
I
G
F
HL
rectangular foot
long feet screw
17

x2
23006
25pcs
x11
23010
90°
09732
H
I
09732
3
step 10 case assembly - attach back panels
nails
Tab 2 of the large head nails 23010 into the centre of back edge of divider panel G. ONLY HALF WAY IN.1. Slide the back panels 09732 up (unfinished side up) against the nails and hold smooth with bottom panel I.2. Attach one nail 23006 in each corner.3. Attach the rest of nails 23006 all the way arround the edges and 9 pcs 23010 into divider panel G.4.
unfinished side
09732
09732
I
1
unfinished side 09732
H
I
09732
2
large head nails
18

132
1 1/5"
x2
94073
wall attachment strip
09732
L
G
F
I
H
09732
step 11 case assembly - mount safety wall attachment strips
IMPORTANT.
The screw supplied together with the wall attachment strip
is to be used only for fixing the wall attachment strip to the
furniture.
In addition to this, you vill need to choose a screw or
fitting which is suitable for securing the bracket to the
kind of walls you have. If you are unsure about what type
of screw to usee contact your local handware store.
Wall attachment strip are required to be installed.
Place the dresser in the desired position against the wall. Mark the locations of1. the TWO wall attachment SLOTS at the top of the DRESSER.
MEASURE down 1 1/5" from the mark at the top of the case and attach the two2. wall STRIPS with washers and screws.
Note - The washers and screws for wall attachment should be purchased from
a hardware store to suit the type of wall.
Pass the wall attachment strips through the slots at the top back of the case,3. and attach them to the underside of the DRESSER top with the screws and
washers that are included in the PACK.
19

x1
94072
x2
26040
step 12 case assembly - attach stabilizer
Place the stabilizer 94702 in between divider panel G and right end panel H.1. Place the short screw 26040 through the holes of 94702 and gently screw them into the panels G and H.2. Tighten screws but do not over tighten.3.
stabilizer
H
F
I
L
09732 09732
G
short screw
20