ROOMS TO GO 2179-73PHR User manual

Qty
1A LSF Wing 1 E RSF Wing
Assembly Instructions
SYNE 2179-73PHR ZG Reclining Console Loveseat w/Pwr headrest
SKU# 11221710 11221708 11221722
***CAUTION: The item is heavy, assembly should be performed by two people.
Parts and Hardware List
No Description Image Qty No Description Image
1
B
Transformer
LSF Back Cushion
D RSF Back Cushion 1
CConsole Back
Cushion 1 G
1 F Lovesesat console
Recliner Base 1

C
D
A
B
C
D
Step2
Locate the power cord C
attached to the bottom back
and connect to plug D located
at the rear of seat.
Step 1
Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in
place.
A
B
C
D
Step 4
The Transfomer is attached to the bottom
of rail and connect to DC Port located at
the rear of arm.
Male
Step 3
Insert the male KD Bracket into the slot
of the female Bracket pressing firmly
downward until the frame is tight.
Female
Note: Make sure all PLUGS are connected
on the product before plugging power cord
into power outlet. If not damage can occur.
The USB ports (where applicable) are
designed with working voltage of 5V, and
can NOT be used to supply power for
laptop computers (neither PC or Mac).
Plugging a laptop computer to the USB port
may end up damaging either the computer
or the USB port due to unmatched working
voltage.
voltage.

Lower headrest
Open recliner
Raise headrest
Raise headrest
Open recliner
Lower headrest
RSF JLDK.67.05.02
C.USB charging ports:
1) USB ports are for charging mobile devices ONLY (not compatible with
computers).
2) Output 5V 2A.
3) DO NOT USE USB SPLITTER/EXTENDERS, DO NOT CHARGE MULTIPLE DEVICES
AT ONE TIME, OTHERWISE DAMAGES COULD OCCUR.
USB port
Close Recliner
USB port
Front
Home
Close Recliner
Front
Home
2179RTG
Function introduction for JLDK.67.05.01/JLDK.67.05.02
A．Functions:
LSF JLDK.67.05.01