ROOMS TO GO SH255KBGE-1 User manual

Headboard
Leg (R)
Bolts
M8 x 20mm
Bolts
M6 x 25mm
Bolts
M6 x 35mm
Bolts
M6 x 70mm
Wood
Dowel
Allen Key
M4 x 65mm
Allen Key
M5 x 65mm
Screw
M4 x 32mm
Flat WasherLock Washer
Headboard
Leg (L)
Footboard Footboard
Leg
Side Rail Side Rail Side Rail
Support Leg
Slat Support Leg
with adjustable feet
x4 x8
x8 x8 x14 x2 x2
x8x14x14 x1 x1
ASSEMBLY INSTRUCTION
SH255KBGE-1 & SH255KBLU-1 & SH255KGRY-1 &
SH255KDGR-1 & SH255KPNK-1
1 2 3 45
876 9 10
A B C D E
I
H
G
FJ

ASSEMBLY INSTRUCTION
SH255KBGE-1 & SH255KBLU-1 & SH255KGRY-1 &
SH255KDGR-1 & SH255KPNK-1
Begin assembly by attaching each Headboard Leg (2) & (3) to the
bottom of the Headboard (1) by aligning the hole and securing with
3 Allen Bolts (C) , 3 Lock Washer (F) , 3 Flat Washer (G) per leg
using Allen Key (J) .
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach each Footboard Legs (5) to the bottom of the Footboard (4)
by inserting a Dowel (E) & securing with 1 Allen Bolt (D) per leg
using Allen Key (J).
Attach Side Rail Support Leg (8) to the join of the Side Rail (6) and
Side Rail (7) by securing with 4 Allen Bolts (B) , 4 Lock Washer
(F) , 4 Flat washer (G) per support using Allen Key (J).
Attach Side Rail to the Headboard Leg (2) & (3) and Footboard (4).
Aligning holes and securing with 2 Allen Bolts (A) per each and
using Allen Key (I).
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach Support Legs (10) to Slat (9) by securing with 1 Allen Bolt (C)
per support leg. Attach Slat (9) to Side Rail by securing with 1 Screw
(H) per each side. Tighten all screws using philips head screw
driver (NOT INCLUDED). Tighten all bolts on step 3 & 4 using
Allen Key (K) & tighten bolts on step 5 using Allen Key (J).
J
C
F
G
1
3
2
L
R
Make sure the cleat is
on outside edge.
Back
5
4
8
6
7
Do not fully tighten screws
until assembly is complete
and the bed is level.
10
9
9
4
3
2
Do not fully tighten screws
until assembly is complete
and the bed is level.