ROOMS TO GO HLVN A136-49 User manual

ASSEMBLY
INSTRUCTION
DUAL POWER LOVESEAT WITH CONSOLE
HLVN
A
136
/
A
1360
Manufacture
for
Rooms
To
Go
HLVN
SKU
:
A
136
-
49
15215608
A
1360
-
49
11213600
LIST OF PARTS
NO. Description Item Qu ntity
ABackrest
(LSF, RSF) 2
B Seat 1
C Console backrest 1
DWall plug
transformer 1

ASSEMBLY INSTRUCTIONS
Step 1: Take out carefully the back cushions from the packing. Console back is packe insi e the console
base. Unzip the bottom flap an take out console's backrest from inner console frame.
Step 2: Positing the female metal receiver brackets over the male metal posts. Push own the female
brackets over male posts simultaneously until each si e is locke into place an au ile "click" is hear .
POWER CONNECTION
Step 3: Lift velcro flap locate at the bottom back. Latch male wire plug from backrest (hea rest motor wire) to
female wire receiver locate at the bottom back un erneath the flap. This instruction is applicable to all power
hea rest. Allow sufficient space between reclining loveseat with console an the wall behin it.

Step 4: Connect wall plug transformer to transformer switch. An connect transformer plug to electrical outlet.
ELECTRICAL CONTROLS
1 Press button to recline the loveseat & console to esire position
2 Press button to raise the loveseat & console to the upright position.
3 Press button to activate the hea rest forwar
.
4 Press button to return hea rest to the close position.

WARNINGS
*
Keep
unit
at
least
6
"
from
wall
.
*
Keep
unit
at
least
24
"
from
all
heat
sources
.
* Avoi placing unit in areas where unit can be expose to irect sunlight other powerful
light sources, as fa ing or iscoloration may occur.
*
Do
not
reach
un er
seat
when
mechanism
is
operating
or
serious
injury
may
occur
.
*
Reclining
mechanism
shoul
only
be
operate
while
seate
properly
.
*
Do
not
sit
on
arms
or
backrest
.
*
Do
not
jump
or
roughhouse
on
furniture
.
*
If
unit
must
be
move
,
o
not
rag
.
Unit
must
be
lifte
in
or er
to
be
move
.
* Do not continuously operate mechanism for more than one minute or unit may go into
protection mo e by shutting own to prevent overheating.
*
Unplug
unit
from
power
source
prior
to
cleaning
mechanism
.
*
Do
not
allow
electrical
components
to
come
into
contact
with
any
liqui s
.

CARE AND CLEANING
* Upholstere furniture is package tightly to protect it uring transsit. This packaging can sometimes cause
creases or misshape cushions when the furniture comes out of the packaging. These issues will correct
themselves over time as the fibers of the cushions are expose to air. However, shaping the cushions with
your han s can alleviate the creases an compresse fibers more quickly.
* Use a vacuum cleaner to remove ust an ebris from seams an crevasses.
* Use a soft amp cloth to gently clean soile areas an wipe clean. Do not rub.
* Do not use househol cleaners or solvents. Such cleaners may cause amage an /or iscoloration.
* Do regularly use e icate leather care pro uct onto the leather furniture to prevent built up of bo y oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Hea rest not working Ensure that wall power outlet is functional Step 4
Ensure that hea rest power cable is plugge into the seat cable Step 3
Not Reclining Ensure that wall power outlet is opterational Step 4
Backrests gaps Ensure the backrests are properly clippe into the male posts locate on seat
mechanism. Check that brackets are not loose, positione improperly or bent.