Rose electronics CRK-1P1V User manual

CrystalView Plus
WWW.ROSE.COM
CAT5/CAT6 KVM extender
Extends keyboard, video, mouse, audio and serial
up to 1,000' over CAT5/6 cable
Video resolutions up to 1600 x 1200
Supports PC, serial, and audio
Video tuning is made easy with simple
keyboard commands
Skew compensation to support CAT5, CAT5e,
and Cat6 cable
Available in single, dual or quad video
Features and Benefits
JSingle, dual, or quad video models available
JVideo resolutions up to:1600 x 1200 @ 60Hz (650’)
1280 x 1024 @ 75Hz (1000’)
JIntegrated skew adjustments for compensating
different CATx cable types
JIndependent low and high frequency equalization
adjustments
JAll control and video adjustments are easily made
with simple keyboard commands
JAudio options:
JFull stereo audio can be transmitted either
direction across the link (simultaneously)
JDigital CD quality audio
JSupports stereo speakers and microphone
JSerial option:
JSupports serial baud rates up to 19.2 baud
JSupports Transmit, Receive, and two
hardware handshaking lines
JFull keyboard and mouse emulation
JCompatible with Rose Electronics KVM switches
JCompatible with Windows, UNIX, Linux,
and other operating systems
JAll settings stored in flash memory
JRackmount kits available in 19”, 23”, or 24” sizes
The CrystalViewTM Plus Advantage .
The CrystalView Plus series of enhanced KVM
extenders allow you to position your KVM station up
to 1,000 feet (300 meters) away from your computer
using a single CATx cable. If your computer supports
dual or quad video, the CrystalView Plus dual or quad
model can fully support it.
The CrystalView Plus has gone one step further and
eliminated adjustment knobs and jumper switch
settings. Integrated controls that adjust for skew, low
and high frequency equalization, and RGB delay for
each channel have been made easy by simple
keyboard commands.
Each channel (single, dual, or quad) can be adjusted
independently or global settings can be applied for all.
These adjustments make for a crystal clear image
using CAT5, CAT5e, or CAT6 cabling.
The stereo audio option produces low-noise CD
quality sound. Speakers, headphones, or a powered
or un-powered microphone can be connected to the
remote unit. It’s perfect for call centers, trader’s
desks, kiosks, TV stations, and other applications
where multiple video sources are used and need to be
extended from the computer.
The bi-directional serial option allows you to connect a
touchscreen, digital tablet, serial printer or other
supported serial device to the remote location. No
set-up is needed; just connect the serial
device to the serial port and it’s ready to
use.
View single, dual, and quad video
1,000 feet away

Phone: [phone] E-mail: [email protected] 
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: [phone] Rose Electronics – Asia: [phone]
DS-CRV-PL 2.7 Copyright 2004 Rose Electronics. All rights reserved WWW.ROSE.COM
Typical Application
View 4 video sources
Overview The CrystalView Plus series CATx KVM extenders are
usually sold in pairs, a local unit and a remote unit. The local unit
connects to your computer or KVM switch and the remote unit
connects to a keyboard, monitor, and mouse. The Local and remote
unit are connected together with standard CAT5, CAT5e, or CAT6
cable. To compensate for these different cable types, the CrystalView
Plus has a built-in RGB compensator that can incrementally adjust the
red, green, and blue color delay in 2.8ns increments. This and the
skew compensation provide for a crystal clear image using any CATx
type cable. All configuration and video tuning is performed using
simple keyboard commands from the remote unit.
Installation Installing the CrystalView Plus is as simple as
connecting the computer or KVM switch to the local unit, a KVM
station to the remote unit and connecting the local and remote units
together with CATx cable. Using standard CAT5 cable, no
compensation, or very little is needed. If you’re using other than CAT5
cable or several patch panels, some compensation may be needed.
This is easily done using simple keyboard commands.
Extending to a Rose switch In addition to extending a KVM
station from a computer, you can also connect the local unit to a KVM
switch providing access up to 1,000 computers.
Local access features The single and dual video models offer
an additional KVM station on the local unit providing both local and
remote unit access.
Part Numbers
CRK-1P1V PS/2 KVM Extender kit, Single video
CRK-1P2V PS/2 KVM Extender kit, Dual video
CRK-2P1V Single video, local/remote access
CRV-SL1 Single video, local KVM extender
CRV-DL1 Single video, Dual local KVM extender
CRV-SL2 Dual video, local KVM extender
CRV-R1V Single video, remote KVM extender
CRV-R2V Dual video, remote KVM extender
CRV-R4V Quad video, remote KVM extender
/AUD suffix Audio & Serial option
RM-BR1 Rack Mount brackets for:
CRV-SL1, CRV-SL1/AUD
CRV-DL1, CRV-DL1/AUD
RM-BR3 Rack Mount shelf for:
CRV-R1V, CRV-R1V/AUD
CRV-R2V, CRV-R2V/AUD
CRV-R4V, CRV-R4V/AUD
CRV-SL2, CRV-SL2/AUD
Note: CRK part numbers consist of a local unit and a
remote unit
Specifications
Dimensions Width Depth Height Weight
Dimensions Width Depth Height Weight
CRK-1P1V/2P1V (in)
(mm) 7.76 197 3.94 100 1..38 35 2.20 lbs 1.0 kg
CRK-1P1V/2P1V (in)
with audio (mm) 7.76 197 3.94 100 1.73 44 2.87 lbs 1.3 kg
CRK-1P2V (in)
(mm) 4.33 110 5.75 146 1.14 29 1.76 lbs 0.8 kg
CRK-1P2V (in)
with audio (mm) 4.33 110 5.75 146 1.73 44 2.65 lbs 1.2 kg
CRV-R1V/R2V (in)
(mm) 5.51 140 5.71 145 1.14 29 2.65 lbs 1.2 kg
CRV-R1V/R2V (in)
with audio (mm) 5.51 140 5.71 145 1.73 44 2.87 lbs 1.3 kg
CRV-R4V (in)
W /wo audio (mm) 10.8 275 5.71 145 1.14 29 3.75 lbs 1.7 kg
Resolution 1600 x 1200 (60Hz) @ 650’
1280 x 1024 (75Hz) @ 1,000’
Skew 2.8ns steps / 42ns max/color
Connectors Keyboard / Mouse – PS/2 – miniDin6
Video – HD15M/F
Interconnect – RJ45
Serial – DB9M/F
Audio – 3.5mm stereo jack
Power Remote – 9.0VDC adapter
Local – Supplied from CPUs
Approvals FCC-A, CE
Rear view Remote units (Single / Dual / Quad)
Up to 1,000 ft
Computer with 4
video cards
Local KVM
Remote KVM
Rear view Local units (Single / Dual)