Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D User manual

CrystalView DVI Fiber
WWW.ROSE.COM
Digital Fiber KVM extender
Extends keyboard, video, and mouse
signals up to:
650ft (200m) w/ 62,5µm Multimode-Fiber
1300ft (400m) w/ 50.0µm Multimode-Fiber
33,000ft (10,000m) w/9.0µm Singlemode-Fiber
6,550ft (2,000m) w/3.2 GBit model)
Supports DVI-D video at resolutions
up to 1920 x 1200
3.2 GBit optional models
User selectable DDC table
Serial and Audio option
Supports Singlemode and Multimode fiber cables
PS/2 or USB keyboard and mouse support
Single or Dual video models
Easily adapted to your system
Features and Benefits
JSupports:
DVI-D video modes
PS/2 or USB keyboards and mice
Bi-Directional serial (Optional)
Full CD Quality stereo audio (Optional)
JExtend a KVM station from a CPU using
fiber cable up to 6 miles
(1¼ mile for 3.2 GBit model)
JVideo resolutions up to 1920 x 1200 @ 60Hz
JFull 60 Hz frame rate for resolutions up to
1600 x 1200 @ 60 Hz and at least 30 Hz for
lower resolutions
JSupports 18/24–Bit color (Selectable)
JSingle and Dual video models available
JCompatible with all operating systems
JFully automatic KVM sharing on local access
models
JStatus and Data error indicators on all units
JEasy installation and operation
The CrystalView™ DVI Fiber Advantage
The CrystalView DVI Fiber is the KVM extender of choice
for businesses that need to extend and operate a
computer, server, or KVM switch from a great distance.
The CrystalView DVI Fiber makes this possible by the use
of singlemode or multimode fiber cable. You can fully
operate and control a computer or server from as far away
as 6 miles using 9 µm singlemode fiber (1.25 miles using
the 3.2 GBit model). The CrystalView DVI Fiber supports all
combinations of DVI-D monitors and video cards.
The system consists of two units; a transmitter and a
receiver. The transmitter connects to your CPU’s
keyboard, DVI-D monitor, and mouse connectors, or to a
Rose KVM switch. The receiver connects to a keyboard,
DVI-D video monitor and mouse or KVM station. The
transmitter and receiver are connected together with fiber
cable. The receiver can be up to 6 miles from the
transmitter using 9µm Singlemode-Fiber (1.25 miles using
the 3.2 GBit model).
All models are available with both transmitter
and receiver KVM access. The transmitter’s
KVM access allows an additional KVM station to
be connected to the transmitter unit. If your
system requires dual video, the CrystalView DVI
Fiber dual video model can fully support it.
Fiber makes extended
distances easy to reach

Phone: [phone] E-mail: [email protected] 
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: [phone] Rose Electronics – Asia: [phone]
DS-CRVDF-2.1 Copyright 2006 -2007 Rose Electronics. All rights reserved WWW.ROSE.COM
Typical Application
Dual DVI Video model Application
Digitally access a computer from two locations,
locally and remotely
CrystalView DVI Fiber basics The CrystalView DVI Fiber
system consists of a transmitter that connects to a PC, or server and
a receiver that connects to a keyboard, monitor, and mouse or a KVM
switch. The transmitter and receiver units are connected together
with up to 1¼ or 6 miles of standard fiber cable depending on model.
Models The CrystalView DVI Fiber is available in a PS/2 or USB
model. All models allow for a second KVM station next to the PCs,
providing operation from the transmitter or the receiver unit. There is
also a dual video model for systems that need to digitally transmit a
second video source.
Installation Installing the CrystalView DVI Fiber units is as easy
as connecting the KVM station to the receiver, connecting the CPU to
the transmitter, and connecting the transmitter to the receiver with
fiber cable.
Keyboard and Mouse emulation The CrystalView DVI
Fiber uses a microprocessor to emulate the keyboard and mouse.
Only the transmitter unit has to be connected for the PC to boot
properly.
Part Numbers – Multi-Mode Fiber Extender kits*
CRK-2DFMPD1D PS/2 model
CRK-2DFMUD1D USB model
CRK-2DFMPD2D PS/2 Dual Video
CRK-2DFMUD2D USB Dual Video
Part Numbers – Single-Mode Fiber Extender kits*
CRK-2DFSPD1D PS/2 model
CRK-2DFSUD1D USB model
CRK-2DFSPD2D PS/2 Dual Video
CRK-2DFSUD2D USB Dual Video
*kits include transmitter and receiver units
/AUD part number suffix = serial and audio option
/3.2 part number suffix = 3.2 GBit model option
Specifications
Dimensions 4.125W x 5.625D x 1.375H (in)
10.0W x 14.4D x 3.0H (mm)
H = 2.7in (6.3mm) for dual video
Weight 0.65 lbs / 0.3 kg (each)
1.20 lbs / 0.6 kg (each-dual video)
Operating Temp 5˚C – 45˚C / 41˚F – 113˚F
Storage Temp -25˚C – 60˚C / -13˚F – 140˚F Humidity
80% max, non-condensing
Resolution up to 1920 x 1200 @60 Hz
Connectors Video – DVI – I
Keyboard – MiniDIN6 / USB Type A
Mouse – MiniDIN6 / USB Type A
Fiber – LC fiber
Power 90-240 VAC to 5.0 VDC / app. 10W
Power Local unit: 750 ma max
Requirements Remote Unit: 750 ma max
Max distance 650ft (200m) 62,5µm Multimode
1300ft (400m) 50.0µm Multimode
33,000ft (10km) 9.0µm Singlemode
6,550ft (2,000m) w/3.2 GBit model)
Indicators (LEDs) Front panel – power
Video check LED
RJ45 LEDs – Data error / status
Approvals CE
Serial Data: Baud Rate up to 19,200
Data Flow - Format independent
Flow control - RTS, CTS, DTR, DSR
Audio Data: Signal level 5V p-p
Impedance 47KΩ
Connectors 3.5mm stereo jack
Transmission 16 bit, 38.4KHz Digitized
audio
Microphone - Powered or un-powered
Speakers - Powered
CrystalView DVI Fiber (Single
video model)
CrystalView DVI Fiber
(Dual video model)
USB keyboard and mouse models available
Receiver
Transmitter