Rosehill Wine Cellars 6ft Premier Cru Kit Rack User manual

Wood Case 1
Fasteners
•finishing nails to
fasten cross pieces
•brad nails if using
pneumatic brad nailer
•screws to attach
to other modules
•screws for attaching
racks to wall
1
4
1
1
4
1
1
4
#8x1
#8x3
Tips:
1. Using pneumatic brad nailer will make assembly
quicker and easier.
2. Before opening any boxes, if multiple units and
different units have been ordered, please assemble
all boxes by units to ensure that specific unit parts
are not intermixed with other units.
3. It is highly recommended to drill dia pilot
holes on back cross pieces for screws
before attaching to wall.
3
32
#8x3
Assembly Instructions -6Ft-
Tools Needed:
•Hammer
•Pneumatic Brad Nailer
•Power drill
•Level
•Power miter saw (Preferred)
•pilot drill
•Nail Set
•Wood filler (Optional)
•180 grit sand paper (Optional)
3
32
(Preferred)
Apr/23/2012 Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack

Wood Case 2
(1pc)Right end ladder
3
4
72
(1pc)Left end ladder
3
4
72
(11 pcs) Spacers
(10 pcs) Cross piece
Crown
Baseboard
Apr/23/2012 Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack

Wood Case 3
Step 1
Attaching cross pieces and spacers to the BACK
Place the right and left end ladders on the floor. Nail the cross
pieces on the 2nd, 3rd, 4th, 5th and 6th support cleat starting
from the bottom. Nail spacers on the 1st and 7th support cleat
as shown.
1st support cleat
2nd support cleat
3rd support cleat
4th support cleat
5th support cleat
6th support cleat
7th support cleat
First cleat is located
from the bottom of the ladder
3
4
1
Install spacers on 1st and 7th
support cleat as shown Install cross pieces on
support cleats as shown
Step 2
Attaching middle spacers
Place each spacer into middle support cleat slots and nail from
the outside.
Apr/23/2012 Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack

Wood Case 4
Step 4
Attaching to the wall
Fasten to the wall through the back cross pieces using #8x3 “ screws and
using a level to make sure rack is mounted square on the wall. Make sure
back cross piece has ” dia pilot holes drilled before screwing to wall.
For a professional looking job you can use a nail set to indent the nail
heads and wood filler to fill in the nail holes on the front cleats, baseboard
and crown moulding. Give the part that was filled a light sanding with 180
grit sandpaper.
3
32
Step 3
Attaching FRONT cross pieces and spacers.
Nail the cross pieces under the 2nd, 3rd, 4th, 5th and 6th
cleat starting from the bottom. Nail the spacers on the
1st and 7th support cleat as shown.
Install spacers on 1st and 7th
support cleat as shown
Install cross pieces on support
cleats as shown.
Crown moulding
attached to top of rack
1
2
1
baseboard attached
to bottom of rack
1
4
3
Apr/23/2012 Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack