Rosewill RHAI-16001 User manual

Induction Cooktop RHAI-16001
User Manual

3
Induction Cooktop RHAI-16001
Table of Contents
Product Conguration/Control Panel................... 03
1. Safety Caution................................................... 04
2. Operating instructions....................................... 05
3. Selection of Cookware...................................... 06
4. Maintenance and Daily Care ............................ 06
5. Troubleshooting................................................. 07
6. Product Specications ..................................... 08
Thank you for purchasing a Rosewill Induction Cooktop.
Please read the instruction manual before using and retain it
for your future reference.
Please read the operation manual carefully before using induction cooktop and please
keep this in a safe place for future reference.
Some illustration in this manual may not match actual product, they are for reference only.
Power Cord
Exhaust Vent
Ceramic Plate
Control Panel
Control Panel
Lock Indicator
Timer Indicator
Power/Temperature
and Timer Display Power Mode Indicator
TEMP Mode Indicator
Lock Timer Inc / Dec Adjustment Mode Power On / Off
On/Off Indicator
Product Configuration

54
Induction Cooktop Induction Cooktop
RHAI-16001 RHAI-16001
1. Safety Caution 2. Operating instructions
Warning :
2.1 Cooking Mode:
2.2 Timer Function:
2.3 Lock Function:
Immediately switch off the induction cooker in case of any crack on the ceramic cook-
top panel.
1. Do not place the unit in any place that is near a gas or hot environment in order to avoid
damage or malfunction.
2. To reduce risk and damage, this appliance should only be connected into an individual outlet.
The rated electrical current is not less than 16A.
3. Place the unit on a level surface. The distance between the unit and its background surrounding
must have at least a 4 inch clearance.
4. Do not immerse the appliance and electric cord in liquid or allow liquid to go into the cabinet
and as it may short/contact inner electrical components.
5. The power cord must be plugged disconnected from the outlet before cleaning.
6. Do not block the rear exhaust vent with during usage.
7. If the unit is not working, please contact with our technical support for assistance. Do not
disassemble the unit in an attempt to repair the unit yourself.
8. Be sure to use only the supplied power cord or one provided by the manufacturer.
9. It is very dangerous when metal is heated directly or indirectly.
10.Do not place any additional objects on the induction cooker other than the cooking pan/pot.
11.Do not cook with an empty pan/pot. It is very dangerous and will cause unit malfunction.
12.Always clean the unit after each use to avoid any dirt or blockage of the fan exhaust.
13.Do not touch the top plate while the unit is in use, it may be very hot!
14.Do not let children operate the unit alone. Always have adult supervision to prevent injury.
15.Users with a cardiac pacemaker, please conrm with your Doctor before operating the unit to
determine if it is safe for use.
16.Do not operate the unit on a gas stove.
17.Please do not place paper, cloth, or other articles under the bottom of the pan when heating to
avoid the danger of re.
18.Do not place the unit on the cloth or carpet to avoid blocking the rear exhaust vent.
19.Avoid damage to the top plate of the unit. If the top plate is cracked, immediately turn off the
unit, disconnect the unit from the outlet, and contact technical support for assistance.
20.Do not touch the control panel with any sharp implements.
21.Do not place any metal objects on the unit while operating.
A. Connect the power cable to an available outlet
B. After inserting the plug into the socket, a “Beep” will sound and the indicator above the [On/Off]
key will ash, indicating the appliance is connected to a power source and in standby mode.
C. Place a suitable cookware on the center of the cooking zone.
D. To begin heating, press the On/Off button to power on the unit.
E. Select your Mode, Power mode (wattage) or Temp mode (Fahrenheit). Press the Mode key to
select.
F. Press the -/+ keys to select your desired power or temperature
G. Cancel or Stop the induction heating process at any time by pressing the On/Off key.
A. Power: Press the [Mode] key until the indicator of [Power] lights up, display will show [1200]
representing that the default power is 1200W. It can be adjusted by pressing the [+] or [-] key
to set the desired power level. There are 8 power levels in total: 300W, 500W, 700W, 1000W,
1200W, 1400W, 1600W, 1800W. To cancel this mode, press [Mode] key to switch to the cooking
mode or [On/Off] key to stop the operation and place the unit in standby mode.
B. Temperature: Press the [Mode] key until the indicator of [Temp.] lights up, display will show
[425] representing that the default power is 425°F. It can be adjusted by pressing the [+] or [-] key
to set the desired power level. There are 8 power levels in total: 150°F, 200°F, 250°F, 300°F,
350°F, 400°F, 425°F, 450°F. To cancel this mode, press [Mode] key to switch modes or the [On/
Off] key and place the unit in standby mode.
You can set the cooking time when a specic cooking mode is selected. Press the [Timer] key once
to access the timer function, the [Timer] indicator on the left of the key will light up. The display will
show the default time [00:30], press [+] or [-] key to set the desired time; [+] key to set the minute
and [-] to set the hour (press and hold for 3 seconds to access quick adjustment), the time can be
adjusted from 1 minute to 2 hours and 59 minutes. After setting the desired run time, press the
[Timer] key once to confirm or wait until the display stops flashing. After the “Beep” signal, the
appliance will stop the operation and change to standby mode automatically when the end of the
timer is reached. To cancel this function, either press the [On/Off] key to return to standby mode or
press and hold the [Timer] key to resume the desired power or temperature operation.
To activate the lock press the “Lock” icon. This will lock the appliance to prevent any accidental
button presses or changes while in operation. To cancel this function, either press the [On/Off] key
to return to standby mode or press and hold the [Lock] key for 3 seconds.

76
Induction Cooktop Induction Cooktop
RHAI-16001 RHAI-16001
3. Selection of cookware
4. Maintenance and Daily Care
If the above remedies/controls can not fix the problem, unplug the appliance immediately and
contact Technical Support for assistance.Note the error code and report it. To avoid any danger
and damage to the appliance, do not disassemble or repair by yourself.
5. Troubleshooting
Symptoms Check points Remedy
After connecting the
power and pressing the
“power” key, the
appliance has no
response.
Is the electricity in suspension? Use after resuming the
electricity.
Is the fuse broken down? Check the root causes
carefully. If the problem
cannot be fixed, please contact
Service Centerfor checking
and repairing.
Is the plug connected firmly?
Heating being
interrupted in normal
use and a “Beep” will be
heard.
Incompatible cookware or no
cookware detected?
Replace with a compatible
cookware for use with the
induction cook
Is the cookware not placed in the
center of the heating zone?
Place the cookware at the
center of the defined heating
zone.
Is the cookware being heated but
continually being removed?
Place a cookware inside the
heating zone.
Symptoms Check points Remedy
No operation during
heating.
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being misused.
Is the air intake/exhaust vent clogged
or accumulated dust?
Ensure the vents are free and
clear from clutter. Remove any
debris intake/exhaust vents.
Operate the appliance again
after cooling down.
Is the cooker working over 2 hours
without any external instruction?
Reset cooking modes or use
timer function.
Error codes occur. E0 Internal circuit error
E1 Without cookware or Incompatible
cookware used
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short circuit
E6 IGBT sensor open circuit/short
circuit
E7 Top plate overheat
When showing error signal E1,
E2 and E7, please check
whether the cookware is
compatible, or switch on the
appliance again after it has
cooled down naturally.When
showing E0, E3-E6, please
contact Technical Support
assistance.
top.
3.1 Material required:
3.2 Please follow the below requirements if it is necessary to use a pot
other than the one included.
- Steel, cast iron, enameled iron, stainless steel, at-bottom pans/pots with bottom diameter
from 12cm (4.7 in) to 26cm (10.2 in).
- Suggested to use the following pots:
If any errors occur during operation, please check the following table to diagnose the issue
before calling for service. Below are common errors and the checks to perform.
- Check compatibility by using Rosewill magnet card : if this magnet clings to the bottom of
your cookware, it will works with your new induction cooktop
- Pan/pot must be suitable for induction cooker.
- Pan/pot should be tested with the induction cooker rst before use in long sessions.
- Pan/pot should be at and come with a cover with gas vents
1. Remove the power plug prior to clean the unit. Do not clean it until the surface cools down.
2. Glass plate, panel and the shell:
Soft cloth for slight stain.
For grease or dirt, blot by using a clean damp cloth with neutral detergent.
3. While the radiator-fan is working, dust and dirt will stick to the exhaust vents, please clean it
by using a brush or cotton stick regularly.
4. Remember to not wash the unit directly with water to avoid damage.
5. To protect the induction cooker, be sure to have a good contact between plug and socket
before use.
6. Do not pull out the power cord direcHy during operation. To extend the appliance's useful life,
press the "ON/OFF" button rst, then pull out the power cord.
7. In order to increase the life span of the unit, the fan will continue to operate to cool the plate
after the unit has been shut down. Ensure not to disconnect the power cable until the fan has
nished cooling the heating plate.
8. Please disconnect the power cord from the outlet and put it away when not in use.
Stainless steel
pot
Iron blast pan Magnetic stainless
steel pan
Magnetic stainless
Iron pan
Iron board pan

8
Induction Cooktop RHAI-16001
6. Product Specifications
RHAI-16001_B
Electric Household Cooking and Food Serving Appliances
(UL 1026, 6th Edition, rev. May 29, 2014) Household Cooking
and Liquid-Heating Appliances
(CSA C22.2 No. 64-10, rev. Jun, 2013)
We appreciate you purchasing a quality Rosewill product.
If you have any questions or need assistance, please contact our
Customer Service Department: 1-800-575-9885 or [email protected]
4002064
Model RHAl-16001
Rated Voltage 110-120V 60Hz
Power 1800W
Unit Dimensions 10.6"x9.6"x2.4" (270*343*62mm)
Net Weight 5.1 lb (2.3 kg)