Ross Mira+ User manual

Installation and Cabling
4605DR-201-03
© 2021 Ross Video Limited. Ross®, Tria, Mira, Mira Express, Tria Express, Tria News, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All
rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been
taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Caution: Before you set up and operate your server, see the
“Important Safety Instructions” in your User manual.
Ports and Connectors
Specifications
Default Passwords
Windows
Administrator
Abekas
multiflex
Operating Environment
Temperature:
Humidity:
20 - 35°C (68 - 95°F)
20 - 80%
Input Voltages
100 to 240V~
3 to 1.5A
60 to 50Hz
Video/Audio Input Specifications
Video Inputs, HD-SDI
Video Inputs, SD-SDI
Embedded Audio, HD-SDI
Embedded Audio, SD-SDI
AES Discrete Audio
Reference Input
SMPTE 292M 10-bit at 1.5Gb/s
SMPTE 259M 10-bit at 270Mb/s
8 Tracks, 48kHz at 24-bit
4 Tracks, 48kHz at 20-bit
8 or 16 Tracks
AES59-2012/TASCAM Digital
Tri-Level HD or Composite Analog
SD; Terminating
Video/Audio Output Specifications
Video Outputs, HD-SDI
Video Outputs, SD-SDI
Embedded Audio, HD-SDI
Embedded Audio, SD-SDI
AES Audio
Analog Audio Monitoring
SMPTE 292M 10-bit at 1.5Gb/s
SMPTE 259M 10-bit at 270Mb/s
8 Tracks, 48kHz at 24-bit
4 Tracks, 48kHz at 20-bit
8 or 16 Tracks
AES59-2012/TASCAM Digital
3.5mm headphone connector,
unbalanced, line-level at -10dBv, 2
Tracks (1 stereo pair), user
selectable to monitor any out
Note: Some video formats require specific hardware to be installed in your server.
SDI Video Formats
525i (480i) 59.94Hz
625i (576i) 50Hz
720p 50/59.94Hz
1080i 50/59.94Hz
1080p 23.98/24Hz
1080p 50/59.94Hz
UHDTV1 50/59.94Hz
AVC-Intra
No
No
Yes
Yes
No
Yes
Yes
DVCPro-HD
Yes
Yes
Yes
Yes
No
No
No
Power, Video, Audio and Control Cabling Port Pinouts
Pin
1
2
3
4
5
6
7
8
9
Signal
Gnd
Tx-
Rx+
Rx Gnd
n/c
Tx Gnd
Tx+
Rx-
n/c
RS422
(RJ45/DB9)
Mains
Power
Note: It is recommended that you always connect
the AC Power Adapter to the device before
connecting to Mains Power.
Hot
Cold
OUT 3
Gnd
Gnd
Cold
OUT 4
Hot
Gnd
Cold
OUT 2
Hot
Gnd
Cold
IN 4
Hot
Gnd
Cold
IN 2
Hot
Hot
Cold
OUT 1
GndHot
Cold
IN 3
GndHot
Cold
IN 1
Gnd
AES Port
Power
USB 3.1
Ref
In
TC
In
LTC
In
RS-422
Serial
Mini
DisplayPort
SDI
Out
SDI
In
Mira Control
Surface
10 Gigabit
Ethernet
USB 3.1
DVCPRO-HD
(8-Channel)
AES In/Out
9-16 & 1-8
Quad Viewer
Out
Analog Audio
Out
Mini
DisplayPort
RS-422
Serial
AVC-Intra
(12-Channel)
LTC
In
Mira Control
Surface
AES In/Out
9-16 & 1-8
Ref
In
SDI
Out
SDI
In
Quad Viewer
Out
Analog Audio
Out
10 Gigabit
Ethernet
USB 3.1
Note: An octal breakout cable is supplied with the server and provides 8
RJ45 male connectors for serial control over the first 8 channel transports.
RJ45 to D9 adapters are also provided.
Notes:
• Only the Reference BNC (Ref In) on the left (Ch A-D) card is operational
when more than one card is installed.
• The AES Digital Audio I/O ports require the TASCAM AES DIGITAL DB25
Breakout Cable option (not supplied with system).
• The number of SDI inputs and outputs depends on the model of
server you have.
• If you are recording from, or playing into, an external device you must
have all devices connected to the same reference signal to ensure
proper audio/video synchronization.
• A breakout cable connects to the Serial port and provides 8 RJ45 serial
connectors.
• Both RS-422 serial and ethernet control are supported for remote
control.
• The TC In (LINE IN) audio port is used for TC Chase.
Note: The number of Video I/O cards in your server depends on the
options installed. Every video channel features an SDI input and SDI output;
and every channel can be used as a recorder or player.
Reference
Audio
Monitoring
(Ch A-D)
Channel A
SDI In to
Record
Channel A
SDI Out
Quad Out
(Ch E-H)
Reference
Audio
Monitoring
(Ch A-D)
Channel A
SDI In to
Record
Channel A
SDI Out
Quad Out
Ch A-D
LTC In
PC Mouse
& Keyboard
Timecode IN
(line in port)
Computer Monitor
(1920×1080)
AES Audio In/Out
TASCAM / AES-59
(Tracks 9-16)(Tracks 1-8)
RS-422
Serial Mira Control
Surface
Ethernet
AVC-Intra (12-Channel)
DVCPRO-HD (8-Channel)
TC
In

Caution: Before you set up and operate your server, see the
“Important Safety Instructions” in your User manual. User Interface Cabling
Printed In Canada
Having a problem? Call our free, 24-hour technical
support hotline to speak with a live product
specialist located right here in our facility.
Tel: (+1) 613 • 652 • 4886
Email: [email protected]
User Interface Connection
VAR
PLAY
IN POI OUT
PLAY
LIST
P1 P2 P3 P4
GANG
REVERSE
PAUSE
DISABLE
VAR 2SHIFT
12 3 4 56 7 8 9 10
SEARCH
SAVE
LOAD
GOTO IN GOTO POI GOTO OUT
ERASE APPEND
MARK SCROLL WINDOW CRUISE
GOTO TC LOOP
JOG
CUT
COPY
EXIT
TAKE
VAR
PLAY
IN POI OUT
PLAY
LIST
P1 P2 P3 P4
GANG
REVERSE
PAUSE
DISABLE
VAR 2SHIFT
12 3 4 56 7 8 9 10
SEARCH
SAVE
LOAD
GOTO IN GOTO POI GOTO OUT
ERASE APPEND
MARK SCROLL WINDOW CRUISE
GOTO TC LOOP
JOG
CUT
COPY
EXIT
TAKE
PoE Injector
Optional Mira Control Surface
Note: The Mira Control Surface connects to the AVC-In-
tra and the DVCPRO-HD systems in the same way.