Ross Tria Express DUET User manual

Tria Express DUET
User Manual
v01

Thank You For Choosing Ross
You've made a great choice. We expect you will be very happy with your purchase of Ross Technology.
Our mission is to:
1. Provide a Superior Customer Experience
• offer the best product quality and support
2. Make Cool Practical Technology
• develop great products that customers love
Ross has become well known for the Ross Video Code of Ethics. It guides our interactions and empowers
our employees. I hope you enjoy reading it below.
If anything at all with your Ross experience does not live up to your expectations be sure to reach out
to us at [email protected].
David Ross
CEO, Ross Video
[email protected]
Ross Video Code of Ethics
Any company is the sum total of the people that make things happen. At Ross, our employees are a
special group. Our employees truly care about doing a great job and delivering a high quality customer
experience every day. This code of ethics hangs on the wall of all Ross Video locations to guide our
behavior:
1. We will always act in our customers' best interest.
2. We will do our best to understand our customers' requirements.
3. We will not ship crap.
4. We will be great to work with.
5. We will do something extra for our customers, as an apology, when something big goes wrong and
it's our fault.
6. We will keep our promises.
7. We will treat the competition with respect.
8. We will cooperate with and help other friendly companies.
9. We will go above and beyond in times of crisis. If there's no one to authorize the required action in
times of company or customer crisis - do what you know in your heart is right. (You may rent helicopters
if necessary.)
ii • Thank You For Choosing Ross — Tria Express DUET User Manual (v01)

Document Information
• Ross Part Number: 4609DR-120-01
• Release Date: February, 2021.
Copyright
©2021 Ross Video Limited, Ross®, Abekas®, AirCleaner®, AirCleaner-2™,Tria, Tria+, Mira, Mira+, Tria
Express, Mira Express, Tria News, Kiva, and any related marks are trademarks or registered trademarks
of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS
ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or
otherwise, without the prior written permission of Ross Video. While every precaution has been taken
in the preparation of this document, Ross Video assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained herein.
Microsoft®, Windows®, and Windows XP®are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Macintosh®, OS X®, Apple®, and QuickTime®are trademarks of Apple Inc., registered in the U.S. and
other countries.
Google Chrome™, Google®, and the Google logo are registered trademarks of Google Inc.
FFmpeg is a trademark of Fabrice Bellard, originator of the FFmpeg project.
Bethesda, Bethesda Softworks and Bethesda Game Studios and their respective logos are registered
trademarks of ZeniMax Media Inc. in the U.S. and/or other countries. All Rights Reserved.
ZeniMax and its logo are registered trademarks or trademarks of ZeniMax Media Inc. All Rights Reserved.
©2011 ZeniMax Media Inc. Brink, Bethesda Softworks, ZeniMax and related logos are registered
trademarks or trademarks of ZeniMax Media Inc. in the U.S. and/or other countries. Developed in
association with Splash Damage Ltd. Splash Damage and the Splash Damage logo are registered
trademarks or trademarks of Splash Damage Ltd. All Rights Reserved.
GoPro®and Cineform®and their respective logos are trademarks or registered trademarks of GoPro,
Inc.
Creative are trademarks or registered trademarks of Creative Technology Ltd or Cambridge SoundWorks,
Inc. in the United States and/or other countries.
©2019 OpenEXR, Industrial Light & Magic and ILM are trademarks and service marks of Lucasfilm Ltd.;
all associated intellectual property is protected by the laws of the United States and other countries. All
rights reserved.
Mirillis is a registered trademark of Mirillis Ltd. Read more at: https://mirillis.com/
©2019 - fraps®and beepa®are registered trademarks of Beepa Pty Ltd - ACN 106 989 815
LogMeIn, and GoToMeeting are the trademarks and service marks of LogMeIn, Inc., and may be registered
in the U.S. Patent and Trademark Office and in other countries.
are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
id, id Software and related logos are registered trademarks or trademarks of id Software LLC in the U.S.
and/or other countries. All Rights Reserved.
©1997 id Software LLC, a ZeniMax Media company. QUAKE, id, id Software, id Tech and related logos
are registered trademarks or trademarks of id Software LLC in the U.S. and/or other countries. Bethesda,
Bethesda Softworks, ZeniMax and related logos are registered trademarks or trademarks of ZeniMax
Media Inc. in the U.S. and/or other countries. All Rights Reserved.
RealNetworks and RealVideo are registered trademarks of RealNetworks, Inc.
Tria Express DUET User Manual (v01) — Document Information • iii

are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their
respective owners.
TechSmith®and Camtasia®are either registered marks or marks of TechSmith Corporation in the U.S.
and/or other countries.
ATI is a trademark of Advanced Micro Devices, Inc.
The Miro name, logo, and icon are trademarks of the Participatory Culture Foundation (PCF).
VMware, the VMware logo, VMware Cloud Foundation, VMware Cloud Foundation Service, VMware
vCenter Server, and VMware vSphere are registered trademarks or trademarks of VMware, Inc. or its
subsidiaries in the United States and/or other jurisdictions.
SEGA and the SEGA logo are either registered trademarks or trademarks of the SEGA Holdings Co., Ltd
or its affiliates.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
FCC Compliance and User Information
The following information has been provided to clarify FCC requirements for operation of this device.
These requirements are found in the FCC rules for radio frequency devices, Part 15.
Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his or her own expense.
Important - Modifications & Shielded Cables
Changes or modifications to this product not authorized by Ross®Video Limited could void the FCC
Compliance and negate authority to operate the product.
This product was tested for FCC compliance under conditions that included the use of Ross®Abekas®
peripheral devices and Ross®Abekas®shielded cables and connectors between system components. It
is important that Ross®Abekas®peripheral devices are used, and shielded cables and connectors are
used between system components to reduce the possibility of causing interference to radios, television
sets, and other electronic devices. Ross®Abekas®peripheral devices and the properly shielded cables
and connectors can be obtained directly from Ross®Abekas®, or through a Ross®Abekas®-authorized
dealer.
EMC Notices
Canada
This Class “ A ” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe “ A ” est conforme a la norme NMB-003 du Canada.
Europe
This equipment is in compliance with the essential requirements and other relevant provisions of CE
Directive 93/68/EEC.
iv • Document Information — Tria Express DUET User Manual (v01)

Australia
This equipment has been tested to AS/NZS CISPR 22:2009 +A1:2010 and found to comply with the limits
for a Class A Digital device.
International
Important: This is a Class A product. In domestic environments, this product may cause radio interference, in which case the
user may have to take adequate measures.
Safety and First Aid
Ross®Abekas®equipment is designed to the highest standards of quality and reliability. However, no
matter how these systems are designed, operators and maintenance personnel can be exposed to electrical
shock hazard when protective covers are removed for maintenance or the installation of options. With
this caution in mind, each operator and engineer must observe all safety regulations, and have a clear
understanding of first aid procedures related to electrical hazards.
Safety and Compliance Certifications
Power Information
To ensure safe operation and to guard against potential shock or risk of fire, ensure your AC power
source for the system is within the required voltage range and frequency.
Operating Environment
The optimum operating environment is within the following ranges:
• Recommended Operating Temperature:
• Recommended Operating Humidity: 20% to 80% non-condensing
Note: High temperature/humidity should be avoided at all times.
Safety Information
Important Safety Notices
This system complies with safety standard . To ensure safe option and to guard against potential shock
hazard or risk of fire, the following must be fulfilled:
•This system features auto-ranging power supplies. Ensure that your power source is within the correct
range of voltage and frequency, as required by the system.
• Each chassis in this system must be electrically grounded by connecting the input power cord(s) to
a correctly wired and grounded power outlet.
Warning: Completely disconnect all input AC power cords from the chassis before removing the top cover from the chassis.
Failure to do so will expose dangerous electric currents and voltages. Physical contact with these electric currents and voltages
is extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should remove the
top cover from the chassis.
Warning Hazardous Voltages: Modules marked with this symbol may be removed while the system is operating (powered).
After removing a module, beware of dangerous electric currents and voltages that are exposed on the module receptacle connector
inside the chassis. Please keep fingers, tools, and foreign metal objects away from the exposed receptacle connector while the
chassis has input AC power applied. Physical contact with these electric currents and voltages is extremely dangerous and may
result in severe physical injury or death! Only qualified service personnel should remove these modules.
Tria Express DUET User Manual (v01) — Document Information • v

Environmental Information
The equipment that you purchased required the extraction and use of natural resources for its
production. It may contain hazardous substances that could impact health and the environment.
To avoid the potential release of those substances into the environment and to diminish the need for
the extraction of natural resources, Ross Video encourages you to use the appropriate take-back systems.
These systems will reuse or recycle most of the materials from your end-of-life equipment in an
environmentally friendly and health conscious manner.
The crossed-out wheeled bin symbol invites you to use these systems.
If you need more information on the collection, reuse, and recycling systems, please contact your local
or regional waste administration.
You can also contact Ross Video for more information on the environmental performances of our
products.
Company Address
Ross Video Limited — 8 John Street Iroquois, Ontario, Canada, K0E 1K0
Ross Video Incorporated — P.O. Box 880, Ogdensburg, New York, USA, 13669-0880
([phone]General Business Office:
([phone]Fax:
1-844-652-0645Toll Free Technical Support (North America):
[phone]Toll Free Technical Support (International):
([phone]Technical Support:
([phone]After Hours Emergency:
[email protected]E-Mail (Support):
[email protected]E-Mail (General):
www.rossvideo.comWebsite
Technical Support
At Ross Video, we take pride in the quality of our products, but if a problem does occur, help is as close
as the nearest telephone.
Our 24-Hour Hot Line service ensures you have access to technical expertise around the clock. After-sales
service and technical support are provided directly by Ross Video personnel. During business hours
(eastern standard time), technical support personnel are available by telephone. Outside of normal
business hours and on weekends, a direct emergency technical support phone line is available. If the
technical support personnel who is on call does not answer this line immediately, a voice message can
be left and the call will be returned shortly. Our Technical support staff are available to react to any
problem and to do whatever is necessary to ensure customer satisfaction.
vi • Document Information — Tria Express DUET User Manual (v01)

Contents
Required Equipment..................................................................................................................................10
Getting Started...........................................................................................................................................11
Power On/Off......................................................................................................................................................................................................................11
Windows®Login..................................................................................................................................................................................................................11
Software...............................................................................................................................................................................................................................11
Server Configuration..................................................................................................................................12
Channel Setup.....................................................................................................................................................................................................................12
To Configure the Hardware Channels..............................................................................................................................................................13
Video Formats.....................................................................................................................................................................................................................13
To Configure the Video Format.........................................................................................................................................................................13
Video Router Setup.............................................................................................................................................................................................................14
To Connect to a Video Router...........................................................................................................................................................................14
Audio Setup.........................................................................................................................................................................................................................15
To Configure the Audio Setup...........................................................................................................................................................................15
Audio Router Setup............................................................................................................................................................................................................16
To Configure the Audio Router.........................................................................................................................................................................17
Timecode Setup..................................................................................................................................................................................................................18
To Configure the Timecode...............................................................................................................................................................................18
Channel Label Setup...........................................................................................................................................................................................................19
To Assign Labels to Channel Transports..........................................................................................................................................................19
TSL Tally Setup....................................................................................................................................................................................................................20
To Configure the TSL Tally Input.......................................................................................................................................................................20
Import..........................................................................................................................................................22
Supported Media Files for Hardware Import..................................................................................................................................................................22
Supported Transcode Import............................................................................................................................................................................................23
To Import Media Files........................................................................................................................................................................................................35
To Add a Watch Folder.......................................................................................................................................................................................................36
To Configure Tria Import.................................................................................................................................................................................................37
Tria Explorer................................................................................................................................................41
Tria Explorer Login ...........................................................................................................................................................................................................41
To Log In to Tria Explorer.................................................................................................................................................................................41
Managing Accounts............................................................................................................................................................................................................42
To Set Account Permissions..............................................................................................................................................................................42
To Set Account Passwords.................................................................................................................................................................................42
Physical Channel Setup......................................................................................................................................................................................................43
To Assign Channel Transports to Physical Channels......................................................................................................................................43
Channel Transport Control........................................................................................................................45
To Load a Clip......................................................................................................................................................................................................................46
To Trim a Clip.......................................................................................................................................................................................................................47
To Play a Clip.......................................................................................................................................................................................................................47
To Unload a Clip..................................................................................................................................................................................................................47
Clip Repeat Modes..............................................................................................................................................................................................................48
Normal (Off)........................................................................................................................................................................................................48
Loop......................................................................................................................................................................................................................48
Ping-Pong............................................................................................................................................................................................................48
Loop to Play.........................................................................................................................................................................................................48
Tria Express DUET User Manual (v01) — Contents • vii

Recording a Clip..................................................................................................................................................................................................................48
To Record a New Clip.........................................................................................................................................................................................48
To Overwrite/Append to a Clip.........................................................................................................................................................................50
Locking Channel Transport Control.................................................................................................................................................................................51
To Lock/Unlock a Channel Transport...............................................................................................................................................................51
Keyboard Shortcuts............................................................................................................................................................................................................51
Clip Library..................................................................................................................................................55
Search...................................................................................................................................................................................................................................55
Play Lists..............................................................................................................................................................................................................................56
To Create/Edit a Play List...................................................................................................................................................................................56
To Air a Play List..................................................................................................................................................................................................57
Play List Commands...........................................................................................................................................................................................58
Folders..................................................................................................................................................................................................................................58
Clip Library Columns..........................................................................................................................................................................................................59
Clip Metadata......................................................................................................................................................................................................................59
To Edit the Label Metadata of a Clip.................................................................................................................................................................59
To Edit the Attributes Metadata of a Clip.........................................................................................................................................................59
To Edit the Timecode Metadata of a Clip.........................................................................................................................................................61
To Edit the Trim Metadata of a Clip..................................................................................................................................................................61
Parent/Child Clips...............................................................................................................................................................................................................62
To Create a Child Clip.........................................................................................................................................................................................62
Deleting a Clip.....................................................................................................................................................................................................................63
To Delete a Clip...................................................................................................................................................................................................63
Lock/Unlock Clips................................................................................................................................................................................................................63
To Lock/Unlock a Clip.........................................................................................................................................................................................63
Timecode Chase..................................................................................................................................................................................................................64
To Create a TC Chase List...................................................................................................................................................................................64
To Air a TC Chase List.........................................................................................................................................................................................65
Desktop Multi-Viewer................................................................................................................................66
Export...........................................................................................................................................................67
Supported Media Files for Export.....................................................................................................................................................................................67
To Select an Export Destination........................................................................................................................................................................................67
To Export Media Files.........................................................................................................................................................................................................68
Remote Control Support............................................................................................................................70
Remote Communications (RS-422)...................................................................................................................................................................................70
To Configure a Room for the BVW-75 Protocol...............................................................................................................................................70
To Configure a Room for the Odetics Protocol...............................................................................................................................................71
To Configure a Room for the VDCP Protocol...................................................................................................................................................73
To Configure a Room for the AMP Protocol....................................................................................................................................................74
DashBoard...........................................................................................................................................................................................................................76
Abekas®DashBoard Service..............................................................................................................................................................................76
Clip ID Support....................................................................................................................................................................................................................80
Sony®MVS Series Switcher................................................................................................................................................................................................80
Maintenance...............................................................................................................................................81
Alarm....................................................................................................................................................................................................................................81
Media Drive.........................................................................................................................................................................................................................81
Disk Space............................................................................................................................................................................................................81
To Replace the Media Drive...............................................................................................................................................................................81
To Mount the New Disks....................................................................................................................................................................................82
viii • Contents — Tria Express DUET User Manual (v01)

AsRun Log Creator......................................................................................................................................83
To Run an AsRun Report....................................................................................................................................................................................................83
Troubleshooting.........................................................................................................................................85
Specifications..............................................................................................................................................86
Resources............................................................................................................................................................................................................................86
Operating Temperature.....................................................................................................................................................................................................86
Ports.............................................................................................................................................................87
Serial (RS422) Port..............................................................................................................................................................................................................87
LTC Port................................................................................................................................................................................................................................87
AES Audio Port....................................................................................................................................................................................................................87
Index................................................................................................................................88
Tria Express DUET User Manual (v01) — Contents • ix

Required Equipment
To set up and operate your server you will need a computer monitor supporting either HDMI™,
DisplayPort™, or VGA (analog). A monitor with a minimum native resolution of 1920×1080 is recommended
for best user experience. A computer monitor is not supplied by Ross Video.
A standard USB keyboard (QWERTY) and mouse are provided with your server.
10 • Required Equipment — Tria Express DUET User Manual (v01)

Getting Started
Power On/Off
The system powers on with the single power button located at the front of the chassis. When the power
button is pressed the system will boot up and launch Windows®.
Warning: Even with the system powered off, hazardous voltages are present inside the chassis. Disconnect both the primary
and secondary power supplied before opening up the chassis.
Windows®Login
The server comes with the Microsoft®Windows®operating system and all the required software
pre-installed.
Refer to the Windows®help system for information on changing the password.
Note: Once you have logged in to the system, the video channels and serial control are all active. If you are using an external serial controller,
that controller can now be used to control the video channels (including loading and playing clips).
Software
The server comes pre-installed with all the software needed for operation and setup.
•Tria Explorer — provides a graphical interface to the operation of the server.
•Tria Import — allows you to import media files into the server.
•Tria Config — allows you to configure the hardware of the server.
Tria Express DUET User Manual (v01) — Getting Started • 11

Server Configuration
The Tria Config application allows you to configure various aspects of the hardware in your server.
The number of channels and inputs and outputs you have depend on the hardware installed in your
server.
Important: Not all settings are available on all servers or require a option to be purchased or installed.
Channel Setup
The hardware channels can be set up in a number of ways, depending on the task you need the server
to perform. These configurations are applied to all the channels in a group (ChA-D) and can be used for
simple background video, keyed video, MultiScreen, Stereoscopic 3D, instant replay (2D).
Table 1: Video-Only / Video+Key Modes
DescriptionMode
Four (4) background channel transports (no alpha).V V V V (Mix)
Two (2) keyer channel transports (video+alpha). Channel A carries the video and channel C carries
the alpha for the first key and channel B carries the video and channel D carries the alpha for the
second key.
VK VK (Mix)
One (1) keyer channel transport (video+alpha) and two (2) background channel transports. Channel
A carries the video and channel B carries the alpha. This configuration also allows the two video
(V) channels to playout a Play List with mix transitions.
VK V V (Mix)
Two (2) keyer channel transports (video+alpha). Channel A carries the video and channel B carries
the alpha for the first key and channel C carries the video and channel D carries the alpha for the
second key.
VK VK
One (1) keyer channel transport (video+alpha) and two (2) background channel transports. Channel
A carries the video and channel C carries the alpha.
VK V V
Two (2) background channel transports and one (1) keyer channel transport (video+alpha). Channel
B carries the video and channel D carries the alpha.
V V VK
Two (2) background channel transports and one (1) keyer channel transport (video+alpha). Channel
C carries the video and channel D carries the alpha.
V V VK (Mix)
Table 2: ISO Modes
DescriptionMode
Two (2) 2D cameras are recorded to the same clip ID on channels A and B. Channels C and D are
the playback channels.
ISO2 + V V (Mix)
Three (3) 2D cameras are recorded to the same clip ID on channels A-C. Channel D is the playback
channel.
ISO3 + V
Four (4) 2D cameras are recorded to the same clip ID. There are no playback channels.ISO4
Two (2) 2D cameras are recorded to the same clip ID on channels A and C, and another two (2)
2D cameras are recorded to the same clip ID on channels B and D.
ISO2 + ISO2 (Mix)
Two (2) 2D cameras are recorded to the same clip ID on channels A and B, and another two (2)
2D cameras are recorded to the same clip ID on channels C and D.
ISO2 + ISO2 (Time-Slip Record
+ Playback)
Channels A and B are the playback channels, and two (2) 2D cameras are recorded to the same
clip ID on channels C and D.
V V (Mix) + ISO2
Two (2) 2D cameras are recorded to the same clip ID on channels A and B and channels C and D
make one (1) keyer channel transport (video+alpha).
ISO2 + VK
12 • Server Configuration — Tria Express DUET User Manual (v01)

Table 3: Multi-Screen Modes
DescriptionMode
A 2-wide MultiScreen video stream with alpha. The MultiScreen is a single channel transport used
for media files that are of a non-standard size (3840×1080).
2X VK (Multi-Screen VK)
To Configure the Hardware Channels
The number of hardware channels on your server depends on the configuration you purchased.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Channels tab.
3. Select the video processing mode and how you want the channels grouped.
4. Select the default alpha (key) output that is used on a video plus key channel transport when no
alpha channel is present in the clip or no clip is loaded.
•Output BLACK on key output — the key (alpha) channel outputs a full frame of internally
generated black.
•Output WHITE on key output — the key (alpha) channel outputs a full frame of internally
generated white. Use this selection if the output is going to a switcher as an auto-select key. The
full-frame white alpha will force the entire video image onscreen.
5. Click Apply.
Video Formats
Select the video format that the server is operating in, and the source of the reference signal.
To Configure the Video Format
The server can only operate in one video format at a time. All channel transports will play and record
in the same format.
Note: Not all video resolutions and frequencies are compatible. Some selections will be grayed out if they are not compatible.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Video tab.
Tria Express DUET User Manual (v01) — Server Configuration • 13

3. In the Video Reference Frequency area, select the frequency you want the server to operate in.
4. In the Video Resolution area, select the video resolution you want the server to operate in.
5. In the Video Reference Source area, select the type of input reference signal that the server is using.
This is the video signal that is connected to the REF IN BNC on the back of the server.
Note: You should only use Free Run when the server is not receiving video from, or outputting video to, another device.
Important: If you select Tri-Level External Reference or Bi-Level External Reference with no valid reference signal
coming into the server, you will get corrupt video on all outputs.
6. In the Horizontal Phase area, select a timing offset for the video output relative to the reference
timing.
7. Click Restart Tria. A confirmation dialog box is displayed.
8. Click Restart Tria to restart the server application and services with the new setting.
9. Click OK when the restart has completed to dismiss the window.
Video Router Setup
You can connect the server to an external router and control the sources feeding the server.
Note: The router must support the Evertz®Quartz or Probel SW-P-08 protocol.
To Connect to a Video Router
You can change which destinations are coming into the server from the router, as well as which sources
on the router are routed to those destinations.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Video Router tab.
14 • Server Configuration — Tria Express DUET User Manual (v01)

3. In the Router Protocol area, select the protocol you want to use to communicate with the router.
•Probel SW-P-08 — select this option of your router uses the Snell Advanced Media®SW-P-08
protocol.
•Quartz — select this option if your router uses the Evertz®Quartz protocol.
4. In the Router Levels field, select the number of levels that the router is using.
5. In the Router IP Address field, enter the IP address of the router you want to control.
6. In the Router Port Number field, enter the port on the router you want to connect to.
7. Click Connect to Router to connect to the router.
8. In the Video Router Destinations area, select which destinations on the router are connected to
each video channel input on the server. This is the physical connection from one BNC to the other.
9. In the Change Router Sources area you can change which sources are being routed to the destinations
that are assigned to each video channel input on the server.
10. Click Apply.
Audio Setup
You can select the number of audio tracks to record, which sources audio will use, and which audio
channel to monitor from the analog audio out headphone jack. The number of AES digital audio inputs
and outputs depends on the model of server you purchased.
To Configure the Audio Setup
Select the number of tracks to record and which tracks are sent to the headphones jacks.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Audio tab.
Tria Express DUET User Manual (v01) — Server Configuration • 15

3. In the Audio Tracks area, select the number of audio tracks to record.
•2 track audio — record two tracks of audio.
•4 track audio — record four tracks of audio
•8 track audio — record eight tracks of audio.
4. In the Audio Tracks in an ISO Clip area, select the number of audio tracks to record per input channel.
5. In the Audio Muting Policy area, select how the audio output (AES, embedded, and analog audio
out) is muted during playback.
•Mute everything except 100% play speed and JOG STEP — audio is muted at all play speeds
except 1× (100%) and during single-frame jogging.
•Mute everything except 100% play speed. Mute JOG STEP — audio is muted at all play speeds
except 1× (100%).
•Mute when speed is not in the range 85% through 115% of play speed — audio is muted at all
play speeds except in the range of 85% to 115% play speed.
•Mute when playback speed exceeds 200% play speed. — audio is muted only when play speed
exceeds 2× (200%).
6. In the Analog Audio Monitor area, select the channel transport audio that you want to monitor on
the analog audio output headphone jack. Only audio tracks 1 and 2 are available on the analog audio
output port.
7. Click Apply.
Audio Router Setup
There are two integrated audio routers built into the server. An input router that sends audio from an
audio input to any channel transport, and an output router that sends the audio from a channel transport
to any audio output. The number of audio inputs and outputs depends on the options you have installed
in your server.
16 • Server Configuration — Tria Express DUET User Manual (v01)

To Configure the Audio Router
The Audio Input Router tab allows you to set the audio tracks that get recorded into clips stored on the
server and the Audio Output Router tab allows you to set which audio is played from clips stored on the
server.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Audio Router tab.
Tip: If the audio routing on an input or output has been changed, a dot is shown next to the name on the tab.
3. Click the Audio Input Router tab.
4. Click on the tab for the record channel transport that you want to route audio tracks to.
5. In the ChXRecorder Track 1 row, select the source channel input (ChXInput) and the audio track
(Track #) from the input that you want to record on track 1 of the clip.
6. Repeat this step for all of the remaining recorder tracks.
Tip: Click NORMANIZE ALL ChX Input Routes to reset all the input audio tracks to their default recorder track assignment.
7. Click the Audio Output Router tab.
Tria Express DUET User Manual (v01) — Server Configuration • 17

8. Click on the tab for the channel output into which you want to route audio tracks.
9. In the ChXAudio Output Track 1 row, select the source channel player (ChXPlayer) and the audio
track (Track #) from the player that you want to route to track 1 of the output video stream.
10. Repeat this step for all of the remaining output tracks and channel outputs.
Tip: Click NORMANIZE ALL ChX Output Routes to reset all the player audio track to their default output track assignment.
11. Click Apply.
Timecode Setup
The timecode information can be overlayed on the output video stream of the server. This can be time
of day LTC coming into the server, or the embedded timecode in the video signal being recorded.
Important: When you turn the timecode overlay on, it is shown over the image on the video output.
To Configure the Timecode
The timecode information can be overlayed on the output video stream of the server.
Note: The timecode overlay is only on the video output and will not appear in the recorded video.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Timecode tab.
18 • Server Configuration — Tria Express DUET User Manual (v01)

3. In the Timecode Input Source area, select the timecode source for each channel.
•Time of Day LTC In — the LTC signal coming into the server.
•ATC In — the embedded digital timecode in the video source.
4. In the Replace ATC Output with Timecode Remain area, select the video channels that you want
the normal count-up ATC timecode to be replaced with the count-down (time-remaining) ATC
timecode.
Tip: This is useful when you want to display count-down timecode in downstream devices that can decode and display ATC timecode.
5. In the Timecode Overlay on Video Output area, select whether the timecode is displayed on the
video output for each channel.
•Off — the timecode is not shown on the video output stream.
•On in EE and Record — the timecode is only shown when in EE mode or when the channel is
recording.
•Always On — the timecode is always shown on the video output stream.
6. In the Timecode Overlay Position And Size area, use the Left/Right and Top/Bottom sliders to
position the timecode overlay on the background video source, and use the H Small/H Large and V
Small/ V Large sliders to adjust the size of the timecode text.
7. Click Apply.
Channel Label Setup
You can assign a custom name to each channel transport to help identify the server it is on or what it is
used for. Channel transport labels are shown at the far right of each channel transport in Tria Explorer.
To Assign Labels to Channel Transports
Channel transport labels are shown on the channel transport and help identify each channel.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Labels tab.
Tria Express DUET User Manual (v01) — Server Configuration • 19

3. Enter a new label name for each channel transport as required.
Tip: Leave the label name field blank to remove the channel label from the channel transport and Quad Viewer.
4. Click Apply.
TSL Tally Setup
The server can receive TSL messages from a downstream device to tally the channels on the server.
For example, when a production switcher takes the source from the server on-air, the switcher sends a
signal back to the server telling it that is on-air and should be tallied.
The tally status is shown using the color of the background of the Channel Label.
•Gray — the channel is not on program or preview.
•Red — the channel is on program.
•Green — the channel is on preview.
•Amber — the channel is being recorded by a downstream device.
Note: TSL tally colors are set by how the protocol was implemented in the source device and may not be as listed above. Check with the
device that is sending the TSL information to the server for information on how the protocol was implemented.
To Configure the TSL Tally Input
Tally information sent to the server over ethernet using the TSL protocol is used to show red and green
tallies (as well as gray and amber) on the channel labels. You will need the IP address and port of the
device sending the tally information, as well as the screen mapping.
1. Launch the Tria Config application.
You may be prompted to allow the program to make changes on the computer, click Yes.
2. Click the Tally tab.
20 • Server Configuration — Tria Express DUET User Manual (v01)