Rossi 255318 User manual

Welding Cart with Drawers

Assembly Guide

Parts List

1. Base (1)

2. Wheel (2)

3. Caster (2)

4. Rear Panel (1)

5. Shelf (1)

6. Welder Tray (1)

7. Left-Side Support Leg (1)

8. Right-Side Support Leg (1)

9. Hook (2)

10. Axle (1)

11. M6x12 Bolt/Flat Washer/Lock Washer/Nut (35)

12. M12 Flat Washer (4)

13. Split Pin (2)

14. Bottle Chain (1)

15. Handle (1)

16. Handle Brace (2)

Note: Tools required for assembly: Suitable spanners.

SKU WLDCRTROSAN53 Revision 2.0 October 2016

10 12

ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI

Welding Cart with Drawers

Assembly Guide

10.

Install axle (10) to base (1), then on each side place a washer (12) then wheel (2) (wheel “spokes”

facing out). Place another washer (12) on outside of wheel, then secure with split pin (13). Bend legs of

split pins to prevent them falling out.

Attach casters (3) to base (1) using 8 M6 fastener sets (11).

Assemble rear panel (4) to base (1) using 2 M6 fastener sets (11).

Install the left-side support leg (7) to the base (1) using 2 M6 fastener sets (11). Do not tighten the

fasteners at this stage.

Install the right-side right-side support leg (7) to the base (1) using 2 M6 fastener sets (11). Do not

tighten the fasteners at this stage.

Install the shelf (5) to the back panel (4) and to the left and right-side support legs using 6 M6 fasterner

sets (11). Do not tighten the fasteners at this stage.

Install the welder tray (6) to the back panel (4) and to the left and right-side support legs using 8 M6

fasterner sets (11). Tighten all fasteners installed in steps 4 to 7.

Attach the hooks (9) to the left and right-side suport legs using 4 M6 fastener sets (11).

Attach the handle braces (16) to the welder tray (6) using 2 M6 fastener sets (11). The braces sit on the

outside of the welder tray. Do not tighten the fasteners at this stage.

Assemble the handle (15) to the handle braces (16) and to the weler tray (6) using 4 M6 fastener sets

(11). Tighten all fasteners installed in steps 9 to 10.

ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI ROSSI

Some experts believe that the incorrect or prolonged use of almost any product may

cause serious injury or death. To help reduce your risk of serious injury or death, refer

to the information below. For more information, see www.datastreamserver.com/safety

Consult all documentation, packaging and product

labelling before use. Note that some products feature

documentation available online. It is recommended to

print and retain the documentation.

Before each use, check the product for loose/broken/

damaged/missing parts, wear or leaks (if applicable).

Never use a product with

loose/broken/damaged/missing parts, wear or leaks.

Products must be inspected and serviced (if

applicable) by a qualified technician every 6 months.

This is based on average residential use by persons of

average size and strength, and on a property of

average metropolitan size. Use beyond these

recommendations may require more frequent

inspections/servicing.

Ensure that all users of the product have completed a

suitable industry recognised training course before

being allowed access to the product.

If this product has been purchased in error when

considering the information presented here, contact

the retailer directly for details of their returns policy, if

required.

The product has been supplied by a general

merchandise retailer that may not be familiar with your

specific application or description of application. Be

sure to attain third-party approval from a qualified

specialist for your application before use, regardless of

any assurances from the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for

example, automobile, computer, toaster), there is the

possibility of technical issues that may require the

repair or replacement of parts, or the product itself. If

the possibility of such failure and the associated time it

may take to rectify could in any way inconvenience the

user, business or employee, or financially affect the

user, business or employee, then the product is not

suitable for your requirements. This product is not

intended for use where incorrect operation or a failure

of any kind, including but not limited to, a condition

requiring product return, replacement, parts

replacement or service by a technician may cause

financial loss, loss of employee time or an

inconvenience requiring compensation.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Popular Welding Accessories manuals by other brands

Lincoln Electric

Lincoln Electric ZIPLINE BOOM PACKAGE Operator's manual

Lincoln Electric

Lincoln Electric 900 Brochure & specs

Leister

Leister WELDING PEN S operating instructions

GYS

GYS GYSFLASH Assembly manual

Patron

Patron HM002 instruction manual

Lincoln Electric

Lincoln Electric Pyrotome SE Safety instruction for use and maintenance

Etneo

Etneo ET 493 ESD instruction manual

JSP

JSP cobra manual

Mag-Torch

Mag-Torch MT455 instruction manual

FRONIUS

FRONIUS FK 5000 MV Operating instructions/spare parts list

FRONIUS

FRONIUS VR 5000 noSpool Operating instructions and spare parts list

Abicor Binzel

Abicor Binzel ABIPLAS WELD 250 MT operating instructions

Lincoln Electric

Lincoln Electric SVM176-A Service manual

Speedglas

Speedglas 100 User instructions

MAGNATECH

MAGNATECH 427A Operating & maintenance instruction manual

GYS

GYS Junon LCD 5/9 user manual

Cebora

Cebora 3.300.765/B instruction manual

Sperian

Sperian Optrel e670 quick start guide