Roth Touchline Reference guide

ROTH TOUCHLINE ROOM THERMOSTAT
TYPICAL SYMBOLS THAT APPEAR IN THE DISPLAY OF THE ROOM
THERMOSTAT AND EXPLANATION TO THE SENSOR BUTTON
To increase the temperature press up
To decrease the temperature press down
Does this symbol light up? Change the batteries - 2 pcs. AAA 1,5V
Stand by (frost protection)
Reduced operation
Normal operation
OK button
Cancel
In order to increase or decrease the temperature on the thermostat, the thermostat must be active.
This is done by pressing the botton or for 2 seconds. Then you can adjust the temperature.
The new, desired temperature will be increased or decreased within a 0,5° interval.
The new, desired temperature will blink a few times and then the thermostat will show the actual
temperature in the room.
Please find a complete manual on roth-nordic.com under ”Downloads”. It is possible to adjust Touchline with
an app to iPhone, iPad or iPod. Buy the app in App Store and adjust the floor heating no matter where you are.

✓
X
Increase temperature
Menu button
Decrease temperature
Cancel button
OK button
Battery nearly empty
Actual temperature
in the room
The room
thermostat is on
standby
Time program
should be o
The room thermostat
has reduced operation
Normal operation

EXPLANATION TO THE SYMBOLS THAT CAN APPEAR IN
THE DISPLAY OF THE ROOM THERMOSTAT
Battery nearly empty
Relative energy consumption
Dew-point alarm (only when dew-point sensor is connected)
Window contact (only with accessory, will be available during 2013)
Wireless signal
Loss of wireless connection
General alarm
Operation disabled
Working days
Weekend
• Time and date
• Time program
Actual temperature
Room temperature
Floor temperature (only IR-version)
O (frost protection)
Reduced operation
Normal operation
Time program with external clock
Time program 1, 2 and 3
Cooling mode
Cooling lock
Heating mode
AUTO Auto mode: heating and cooling mode controlled by wireless

!

!






eco eco
°C