
SETTING THE TIME
Pull the crown out to the 2
nd
click position.
Turn the crown clockwise to
set hour and minute hands.
After the time has been set,
push
push the crown back to the
normal position.
1
2
3
HOW TO USE THE
CHRONOGRAPH
Press the Button B to start
chronograph. The chronograph
seconds dial at 12 o'clock starts
to rotate. When the chronograph
second hand moves 60 seconds
second hand moves 60 seconds
in a circle, the chronograph
minute at 3 o'clock moves in
minute increments clockwise,
and so on.
When the chronograph button
is pressed again, the chronograph
stops, and
stops, and the indicator of
chronograph second dial and
minute dial is the recording time.
After finishing timing, press the
reset button A to reset the
chronograph to zero.
1
2
3
SETTING THE DATE
Pull the crown out to the 1
st
click position.
Turn the crown clockwise to
set the date.
* If the date is set between
the hours of around 9:00 PM
and 4:00 AM, the date may not
change on the following day.
After the date has been set,
push the crown back to the
normal position.
1
2
3