ROTORCRAFT VD31 User manual

YOUR
MANUAL
VD31 - VD32
GUARANTEE
Congratulations on the purchase of your ROTORCRAFT.
Valid from the date of shipment (see invoice date; a copy of the
sales slip is to be enlcosed when making a claim), this quality prod-
uct is guaranteed against material and construction failure for 24
months. Batteries, watch strap, glass and wear parts are excluded.
Damage incurred through incorrect usage, interference by a third
party, incorrect battery replacement and through other extreme
interference such as falls, impact, water, result in the loss of a
guarantee claim.
FOR MORE INFO ABOUT YOUR GAURANTEE
PLEASE VISIT ROTORCRAFTWATCHES.COM
218273 Rotorcraft Handleiding & Garantie VD31-VD32.indd 1-3 18-10-18 08:54

60
30
15
45
50
55
5
10
25
20
35
40
24
12
618
24
12
618
ADJUSTING DUAL TIME
HANDS POSITION
* After setting or changing the
battery, before setting the time,
check if the dual time hour
hand is at the “0” (24 o’clock)
position.
* If the dual time hour hand is
not at the “0” position, reset it
following the procedure shown
below :
1 Pull out the crown to second
click (VD31) / first click
(VD32).
2 Keep the buttons A & B
pressed at the same time for
more than 2 seconds, then
release the buttons.
* Dual time hour hand moves and
returns to where it was.
3 Press button A or B to reset
the dual time hour hand to
“0” position.
* Button A : dual time hour hand
moves counter-clockwise
Button B : dual time hour hand
moves clockwise
* The dual time hour hand moves
quickly if the respective
buttons are kept pressed.
4 Push the crown back in the
normal position.
LOCAL TIME SETTINGS
1 Pull out the crown to second
click (VD31) / first click
(VD32) when the second hand
is at the 12 o’clock position.
2 Turn the crown to set the
hour and minute hands.
(make sure 24 hour hand is
set correctly).
3 Push the crown back in
the normal position in
accordance with a time
signal.
DATE 24H HAND (DUAL HAND) 24H HAND A BUTTON B BUTTON
VD31
VD32
60
30
15
45
50
55
5
10
25
20
35
40
28
24
12
618
24
12
618
DUAL TIME SETTING
* When moving to a country or
area in a different time zone,
adjust the dual time hour hand
to that country / area :
[ Quick set the dual time ]
1 Crown at normal position.
2 Adjust the time by pressing
the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push
[ Precise adjustment
of the the dual time ]
1 Pull out the crown to second
click (VD31) / first click
(VD32) when the second hand
is at the 12 o’clock position.
2 Adjust the time by pressing
the button A or B.
Button A : -10 minute / push
Button B : +10 minute / push
3 Push the crown back in the
normal position in accordance
with a time signal.
DATE SETTING (VD31 only)
* Before setting the date, be sure
to set the time.
1 Pull out the crown to the first
click.
2 Turn the crown clockwise
until the desired date
appears.
3 Push the crown back in the
normal position.
218273 Rotorcraft Handleiding & Garantie VD31-VD32.indd 4-6 18-10-18 08:54