Rover EXA 700 TAB User manual

Www.roverinstruments.com
DISPLAYDISPLAY
EXA 700 TABEXA 700 TAB
EXA 700 TABEXA 700 TAB
USER’S GUIDE

2
GET TO KNOW YOUR EXA 700 TAB
FRONT PANEL__________________________________
• POWER
• RESET HARDWARE
To turn on
press the
‘HOME’ key.
With instrument ON, keep the “HOME” key pressed for 10”
and turn ON again.
To turn off
press and hold
the ‘HOME’ key
Or press the ‘HOME’
Button once and
touch the
SHUTDOWN icon
A
B
A. Display Touch 9” Pollici
B. LEDs

3
SIDE PANELS _____________________________________________________
• TOP SIDE
• OTHER SIDES
RIGHT LEFT
10
1 2
3
7
6
11
12
13
14
4
8
9
5
1. TV/RF Ingress type “N” 50 Ω
2. SAT/RF ingress type “F” 75 Ω
3. DC at RF IN ON/OFF Remote power switch
4. Slot Common Interface for CAM Module
5. ASI Transport Stream IN/OUT
6. LAN Eternet RJ45
7. Power key
8. Backup Battery Switch
9. HDMI Output
10. USB A 3.0 for memory stick
11. USB A 2.0 for memory stick
12. Power Input connector (12 VDC - 4A)
13. Right speaker
14. Left speaker

4
Make work easier by taking advantage of your multi-purpose bag.
Work safely and without restrictions with both hands free.
The sunlight shield flap allows improved visibility
of the high brightness display.
Secure your meter by connecting it to the
antenna mast or in your car using the practical
ring belt with quick attachment.
If you change the configuration of
the shoulder strap, you can easily carry
the meter vertically by your side.
You can also carry your instrument using its practical handle.
1
3
4
5
6
7
MULTI-PURPOSE BAG
You can use the bag’s convenient stand flap for operation on a
counter.
Connect the shoulder
strap to the two hooks at the
corners of the bag (top left
and bottom right), so you can
hang your meter around your
neck leaving both hands free.
2

5
INSTRUMENT CONFIGURATION
Touch SETTING ICON to access
to the General settings menu
Settings menu configuration
Touch NETWORK ICON to access
to the Network settings menu
Touch INFORMATION ICON to access
to the Instrument Information menu
Touch DATE & TIME ICON to access
to the Date & Time Actualization
menu
Touch DIAGNOSTIC ICON to access
to the Function Diagnostic menu
Touch FILES ICON to access
to the Local Memory menu
Touch UPGRADE ICON to access
to the Software Upgrade menu

6
SCREEN SHOT
The “SCREEN SHOT” function allows you to directly save the TFT monitor screens in an external
memory.
N.B.: The files are saved in .jpeg format.
• If you wish, connect an external memory source (not provided) to the USB A 3.0 or 2.0
socket otherwise the USB ICON will not appear
• Set the instrument on the screen to be saved: Spectrum, Measurements, Constellation,
Echoes etc. Now you will have 2 different solutions:
Swipe the screen down
Or swipe the screen up and touch
LOCAL MEM or USB ICON to save
to the desired memory
Touch LOCAL MEM or USB ICON to
save to the desired memory

7
Touch the TV Icon
Touch EUROPE and select the
Country & Channel desired, touch
APPLY to confirm or EXIT
Touch FREQUENCY if you want to
change the frequency received
Touch DC@RF if you want to
enable remote power supply
Main TV measurements screen
Touch MODE if you want to
change the receiving mode
Touch BAND if you want to change
the bandwidth received
SWITCH TO TV MODE________________________________________
DVB-T/T2 TELEVISION ANALYZER

8
Touch the ECHOES GRAPHIC to zoom IN
the Impulse response
Touch the PARAMETERS LIST to zoom IN
the transmission parameters
Touch the PARAMETERS LIST to zoom IN
the transmission parameters
Touch the colored MARKERS BOXES
to select the available markers
DVB-T transmission parameters list
example
DVB-T2 transmission parameters list
example
ECHOES VISUALIZATION & MARKERS SELECTION___
DVB-T TRANSMISSION PARAMETERS____________________
DVB-T2 TRANSMISSION PARAMETERS __________________

9
Touch INFO T2 to access to DVB-T2
informations
Touch SELECTION PLP to access to PLP
Selection menu
INFO DVB-T2 ___________________________________________________
PLP SELECTION ________________________________________________

10
SWITCH TO TV SPECTRUM MODE ________________________
TV SPECTRUM ANALY ZER
Touch the TV Icon
TV Spectrum example
Touch dB/DIV to change
the dB division value
MARKERS, MAX and MIN HOLD, AVERAGE,
SHOULDER SX and DX CONFIGURATION EXAMPLE
Touch the Spectrum Icon
Touch SPAN to change the Span value
Touch REFERENCE LEVEL to
change the Reference Level value
Touch MARKERS to access to the
MARKERS SETUP MENU

11
SWITCH TO TV CONSTELLATION MODE________________
TV CONSTELLATION ANALY ZER
DVB-T Constellation example DVB-T2 Constellation example
Touch the Constellation IconTouch the TV Icon

12
SWITCH TO MER VS CARRIER MODE ___________________
TV MER VS CARRIER ANALY ZER
Touch the TV Icon
DVB-T MER VS CARRIER analyser
example
MARKERS, MAXIMUM and MINIMUM,
AVERAGE CONFIGURATION EXAMPLE
Touch the MER VS CARRIER Icon
Touch Markers to access to the
Markers setup menu

13
TV MPEG SERVICE
SWITCH TO TV MPEG SERVICE MODE__________________
Touch the TV Icon
TV Service List example
Touch the PLAY SYMBOL to start
the selected TV channel
Touch the Service Icon
Touch the SERVICE desired
FULL SCREEN image example

14
TV ETR 290 ANALYZER
SWITCH TO TV ETR 290 ANALYZER MODE _____________
Touch the TV Icon
TV Service List example Touch ETR-290 icon to start ETR Analyzer
Touch the Service Icon

15
TV STREAM RECORDING
SWITCH TO TV STREAM RECORDING MODE _________
Touch the TV Icon
TV Service List example
Touch the Service Icon
Touch RECORD Icon to Start and
Stop TV Stream recording

16
Touch the SAT Icon
Touch EUTE 5 and select the
Satellite & Transponder desired,
touch APPLY to confirm or EXIT
Touch FREQUENCY if you want to
change the frequency received
Touch SYMBOL RATE if you want to
change the Symbol Rate value
Main SAT measurements screen
Touch MODE if you want to
change the receiving mode
Touch OSCILLATOR if you want to
change the Local Oscillator value
Touch RF SUPPLY if you want to change
the Polarization & DiSEqC value
SWITCH TO SAT MODE ______________________________________
DVB-S/S2 SATELLITE ANALYZER

17
Touch SELECTION PLS to access
to PLS Selection menu
Touch SELECTION ISI to access
to ISI Selection menu
PLS SELECTION ________________________________________________
ISI SELECTION__________________________________________________

18
SWITCH TO SAT SPECTRUM MODE_______________________
SAT SPECTRUM ANALY ZER
Touch the SAT Icon
SAT Spectrum example
Touch dB/DIV to change
the dB division value
MARKERS, MAX and MIN HOLD, AVERAGE,
SHOULDER SX and DX CONFIGURATION EXAMPLE
Touch the Spectrum Icon
Touch SPAN to change the Span value
Touch REFERENCE LEVEL to
change the Reference Level value
Touch MARKERS to access to the
MARKERS SETUP MENU

19
MARKERS, MAX and MIN HOLD, AVERAGE,
SHOULDER SX and DX CONFIGURATION EXAMPLE
SWITCH TO SAT CONSTELLATION MODE ______________
SAT CONSTELLATION ANALY ZER
DVB-S2 Constellation exampleDVB-S Constellation example
Touch the Constellation IconTouch the SAT Icon

20
SAT MPEG SERVICE
SWITCH TO SAT MPEG SERVICE MODE ________________
Touch the SAT Icon
SAT Service List example
Touch the PLAY SYMBOL to start
the selected SAT channel
Touch the Service Icon
Touch the SERVICE desired
FULL SCREEN image example