Rover PrimeDigital Easy Meter User manual

• Keyinanewvaluee.g.
• PressENTERtoconfirm
• Firstselectthesignaltype:oror
• Thenrepeatedlypressthekeys:oror
togetvariousmeasurements:Power,BER,MER,PER,Constellation
• PressfortheIMPORTANTSETTINGS: - BATTERY SAVING = ON or OFF
- CONFIGURATIONS = SAT, TV & CABLE
• Presstoselecttherequiredmemoryplan
• PressandselectVIDEOINandselectEXT(onlywhereavailable)
• SelectFREQorMRK.FR
• KeepENTERpressed2”
• Select
CHAN
orTRANSP
• Navigate
• SelectCHANorTRANSP
• KeepENTERpressed2”
• Selectfromadrop-downlist
• PressENTER
• Presstoenablespectrumanalyzermode
• PressagaintoenabletheMAXHOLDfunction(maxpeak)
• PresstoturnON
• Keeppressed2”toturnOFF
• PresstogotoHOMEMENU
• Pressandholdformorethan10”toRESET,thenturnON
• POWERONandimmediatelyafterpressVOLUMEandholduntilitbeeps
• Rotatetonavigate
• Press(ENTER)toselect
Turn ON/OFF - HOME ____________________________
QUICK REFERENCE GUIDE
Hardware reset __________________________________
Software reset___________________________________
Navigation wheel _________________________________
Main MENU measurements ______________________
Volume & Configuration Menu ____________________
Memory plans____________________________________
VIDEO EXT input__________________________________
Frequency direct selection ________________________
Spectrum mode __________________________________
Select: ___________________________________________
ENTER
or
Chan,Transp,Freq,Ref.Level,Span,etc.inMEAS&SPECT.
inMEAS&SPECT.
CHAN
41
842 . 0 0
TRANSP
TR26
TR3011656.0AN.SAT
TR3111671.0
Dig SAT

• Press Select

• SelectAUTOMEMORYTV   press
• Select toZOOM
• PressENTERtoreturntomeasurements  
Full screen image ________________________________
• Select (iffree)

or   (ifused)
• InMEMORYselectselect
• Select andthe ofdestination
• Select or pressENTER
• InTVMEASselect keepENTERpressedfor2”

• SelectthevalueandpressENTER
• Setthedestinationfile  


• SetAN.Level&Dig.Powerforthesearch

• EnsureyousetthecorrectDISCOVERYmode:
- TERR. ONLY = DIG.TER. & ANALOG (47-880 MHz)
-
TERR & CABLE = DIG.TER., QAM & AN. (4-1.000 MHz)
- CABLE ONLY = QAM & ANALOG (4-1.000 MHz)
AUTOMEMORY TV _______________________________
Memory Menu ___________________________________
Start AUTO MEMORY tv __________________________
Save DATA LOGGER ______________________________
DC at TV RF Input ________________________________
In AUTOMEMORY tv:______________________________
tocreateamemoryPLANautomaticallyinTVmode
START OVERWRITE?
START OVERWRITE?START SAVE?START SAVE?
START SAVE?
SAVE DATALOGGER
Data File: Point:
FROM FILE:
MEMORYMENU
AUTOMEMORYtv
DC@RF
OFF 5V
12V
18V
24V
FROM PLAN: EUROPE
TO FILE N: AUTO2
LEVEL: >55dBuV
POWER: >45dBuV
DISCOVERY: TERR.ONLY
ENTER
ENTER
ENTER
• InMEAS:selecttheCHANorTRANSP
• InSPECT:withtheencoderwheelmovethemarkerexactlytothecenterofthecarrier
• Selectselect
Unlocked digital TV, CATV or SAT signal? __________
MENU&?