Rowlinson Garden Products SS260 User manual

PLEASE READ CAREFULLY BEFORE ASSEMBLY
SS260
8x6 Greenhouse

Siting of the Greenhouse
One of the main considerations is the availability of light and ideally your greenhouse should be positioned where
it will catch as much of the southerly light as possible.
When the greenhouse is positioned with its roof ridge running in an East to West direction, the distribution of
sun light is usually fairly even and this should provide optimum growing conditions for young plants. However,
please bear in mind that trees, walls, fences and buildings can prove a problem, especially in the spring and
autumn when the sun is relatively low in the sky. Try to avoid sites which would shade your greenhouse for much
of the day during these times of the year.
If you don’t have your greenhouse sited to maximise the best light conditions available, you will achieve
disappointing end results with your plants.
Good foundations for the greenhouse base frame
Your greenhouse comes supplied with a sturdy steel base frame. You should provide a level and secure foundation
to fix this base frame to in order to prevent movement or damage to your greenhouse during periods of bad
weather.
Whilst your greenhouse is supplied with fixings to allow it to be fixed directly into the soil it is not nearly as secure
or as strong as bolting the base frame to a hard surface. We strongly advise fixing the greenhouse base frame into
a hard concrete surface.
The most popular method is to lay concrete flag stones ensuring an overlap of at least 6 inches outside the
dimensions of the greenhouse base. Your steel base can then be securely bolted to this foundation.
Before you start assembly, please allow a day to assemble your greenhouse and have someone on hand to help
out. Attempting to assemble this product on your own could lead to damaged panels or framework.
If in doubt of any aspect regarding the assembly, use or safety of your greenhouse please contact us:
Help Line (Normal Office Hours) 01829 261 121
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr.Nantwich
Cheshire
CW5 6BN

QTY.
Part NO.
W05 14
S01 16
M01 16
Step 2
W05
Step 1
W
B01
B01
2
B02
B02
2
B03
B03
4
07 10
S03 10
W05
W07
Base frame assembly
For greenhouses being positioned on a
hard surface e.g concrete.
S03
W07
Concrete Ground
(For assembly on soft surface e.g grass please see next page)
When fixing the greenhouse to the base, please loosen the
screws of the greenhouse and then fix the W05 with it. There
are no extra screws for the base.

QTY.
Part NO.
W05 14
S01 16
M01 16
Step 1
Step 2
W05
B01 2
B04 4
Base frame assembly
For greenhouses being positioned on a
soft surface e.g grass.
(For assembly on hard surface e.g concrete please see previous page)
When fixing the greenhouse to the base, please loosen the
screws of the greenhouse and then fix the W05 with it. There
are no extra screws for the base.
Spikes to be sunk into ground
B02 2
B01 B02
B04

2/2
Step3

1/1J03L/R
1/19
102
104
2
2
2
6
8
1
1
5
2
16
6
2
2/2J02L/R
1J04
J01
Z03
Z01
M01
S01
S02 2
6
W04
2
W03
4
W02
2
W01
2
W08
2
W06
Y10
Y9
Y7
Y6
Y5
Y3
Y2
Y1
Y11
Polycarbonate
Qty.NO.PART
PARTS
Qty.NO.PART
NO.
Part QTY.
P2 Door Frame Assembly
P3 Roof Vent Frame Assembly
L20
L 19
2
4
L21 2
(P7-P10) Front Assembly
(P11-P19)Assembly
8Z02 1
Y12
NO.
Part QTY.
L01A 1
L01B 1
L05A 2
L09 1
L03B 3
L01C 2
L08A 1
(P4-P6) Back Assembly
1
L01B
1
NO.
Part
L01A
QTY.
L05A 2
L05B 2
L01D 1
L01E 1
L03A 1
L14 1
L04A 1
L04B 1
L10 1
L03B 2
2
Y4
1
L06
6
L02B
4
L05C
2
L07
6
L02A
NO.
Part QTY.
2
L03B
L05D 4
2
L08B
L05E 3
L05F 6
PART NO. Qty.
L15 1
L16B 3
L18A 2
L03C 1
L03D 1

PART NO. Qty.
L15 1
L16B 3
P2 Door Frame Assembly
2/19
Step 1-1
Step 1-2
Step 1-3
L18A 2
Z01
Z01
Z01
Z01
Z01
Z01
L18A
L16B
L15
Y11
Y11
L18A
Z01
Z01
L16B
L16B
Z01
Z01
Y12

Y10
P3 Window Frame Assembly
Step 2-1
Step 2-2
Step 2-3
Step 2-2
Step 2-2
Step 2-3
QTY.
Part NO.
Z02
L 20
Y10
L 21
Z02
Z03 Z03
Z02
W06
Z02
L19
L20
L 19
2
4
3/19
Step 2-1 Step 2-2
Step 2-3
L19
L21 2

(P4-P6) Back Assembly
4/19
Step 3-10
NO.
Part QTY.
Step 3-2
L01A 1
L01B 1
L05A 2
L03C 1
L03D 1
L09 1
L03B 3
L01C 2
L08A 1
S01
W02
Please pay attention to the cut corner.
The direction must be correct!!
The same as another side.
W02
W02
L01A
L01B
M01
S01
L08A
M01
S01
Step 3-1

5/19
Step 3-5
Step 3-6
Step 3-4
Step 3-3
Please pay attention to the cut corner.
The direction must be correct!!
The same as another side.
L03B
L03B
L03B
Y2
Y2
Y2
L09
L09
L01B
L05A
L05A
L05A
M01
S01
L03D
L05A
L08A
L03C L03D

Step 3-7
Step 3-8
Step 3-10
Step 3-9
6/19
S01/M01
W 01
W04
S01/M01
L03D and L01C must be put tightly and
correctly using W04. Do not leave big space
between L03D and L01C.
The same for another side.
L01C
L03D
W04
L01C
L01C
L01C
W02
L01A
Y3
Y1
Y4

Step 4-2
Step 4-1
1
L01B
1
NO.
Part
L01A
QTY.
L05A 2
L05B 2
L01D 1
L01E 1
L03A 1
L14 1
7/19
(P7-P10) Front Assembly
L04A 1
L04B 1
L10 1
L04A L04B
Step 4-3
S01
W02
W02
Please pay attention to the cut corner.
The direction must be correct!!
The same as another side.
M01
S01
Step 4-14
L03B 2

Step 4-6
8/19
L03B
L03B
L03B
L05B
L04A
Y2
Y2
Step 4-5
Step 4-4
L05A
L05A
L05B
L05B
L05B
L05A
L01A
M01
S01

Step 4-9
Step 4-7
9/19
S01/M01
W 01
L01D
L01E
L05B
L05A
L01B
L01E
L03B
W02
Step 4-8
Y1
Y4
S01(2PCS)/PLACE

Step 4-13
L 14
!S02(2PCS)
Step 4-14
Step 4-11
Step 4-12
Step 4-10
10/19
Use S02 and M01 tofix the W03's position correctly.
L 14
S02/M01
S02/M01
L03A
M01/S01
Y5
S01(4PCS)
L03A

(P11-P19)Assembly
11/19
Step 5
L07
L08B
1
L06
6
L02B
4
L05C
2
L07
6
L02A
NO.
Part QTY.
2
L03B
L05D 4
2
L08B
L05E 3
L05F 6

12/19
Step 6
Y6
L02A
Y6
3pcs
Step 3-10
Step 7
Y6
Y6
L02A
L02A
Y6
L07

13/19
Step 8
Step 9
Y6
L02A
L02A
Y6 Y6
Y6
L02A
L07
L08B
L05C
L05C
L05C
L05C
Step 4-14

14/19
Step 11
Y7 L02B
4pcs
Step 10
L 06

15/19
Step 2-3
Y7
L02B
5pcs
Step 12
Step 13