6
1. Attach the power cable to the back of the machine, plug into a three-prong outlet, and turn the switch on.
•The unit will conduct an automatic self-diagnostics to ensure accurate counts.
•After three seconds of the counting wheels spinning, the screen will display “0”.
•If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAY AND
SOLUTIONS –LOCATED ON PAGE 9.)
2. Before counting, select counting settings that are related to your counting needs:
•Auto and Manual Start Modes: The machine is preset to automatically start counting bills once
placed into the hopper. To change to manual start mode, press the “M/A” button, insert the bills into
the hopper, and press the “START” button. Press the “M/A” button again to return to auto mode.
•Add Mode: The Add mode displays the cumulative total of all bills counted. To turn the ADD mode
on, press the “ADD” button.
•Batch Mode: The machine is preset to common counting mode. To count bills in batches, press the
“BATCH” button. Batching is preset to 100 bills. To change the batch amount, use the keypad to
enter a batch number between 1 and 999. Press the “BATCH” button again to clear.
•Press the “BATCH” button again to set the amount to 50.
•Press the “BATCH” button again to set the amount to 20.
•Press the “BATCH” button again to set the amount to 10.
•Press the “BATCH” button again to set the amount to 1.
•Press the “BATCH” button again to turn the batch mode off.
•To customize the quantity, you can simply press on the keypad the batch quantity. For
example, if you wish to batch in quantities of 30, simply press on the keypad “3”, followed
by “0” (Enter 30). The number 30 will be displayed on the control panel.
•Counterfeit Detection: To turn on/off counterfeit detection methods, press the “CF” button. If a
suspicious bill is found, the machine will stop counting to allow removal and will display the error
code on the display. To resume counting, simply press “START”.
PRODUCT OPERATION
