Catalog #
Type
Project
COMBOLIGHT®LV Series
FOUR (4) Light Square Recessed
Next Generation Trimless
Multi-Lamp Luminaire
PAR38 Metal Halide
8.75"
Adjustable
A
B
ED
F
C
G
380º x 45º locking
angular adjustment
45º visual cut-off
Perforated mesh plaster
frame adheres to ceiling
compound for seamless
trimless mounting.
Beveled housing interior and
standard retractable yokes allow
lamp holders to slide within the
housing for added adjustability.
Trimless
Detail
Ceiling mudding
compound is applied
directly to the edge
of the aperture.
Side mounted compartment
houses wiring, Aromat®
electronic ballasts and
thermal protector.
Accessible through
fixture opening.
Tabs for aircraft
cable suspension
above ceiling Butterfly Brackets
for Black Iron mounting
Other Adders
CC - Two Circuit
CP - Chicago Plenum
RECESSED PAR38MH
LV TRIMLESS
SPECIFY-
Dimensions A
Housing
Length
B
Housing
Height
C
Aperture
Length
D
Aperture
Width
E
Plaster Frame
Width
F
Plaster Frame
Length
G
Above Ceiling
Width
Ceiling
Cut-Out
23.50” 9.02” 17.73” 17.73” 23.48” 23.48” 25.68” 29.03” x 29.03”
Optional Accessories - Details on Other Side
Baffle Snoots Louvers Lenses
DESCRIPTION:
An adjustable PAR38MH fixture
suitable for multiple downlighting
applications with one point of
electrical entry. Powder coat fin-
ish on housing & lamp assembly.
Housing suitable for new con-
struction applications.
CONSTRUCTION:
All aluminum construction.
Perforated mesh plaster frame
adheres to ceiling compound for
seamless trimless mounting.
Beveled fixture opening provides
easy mudding compound applica-
tion. Can accommodate 0.50” or
0.625” drywall. Includes butterfly
brackets for black iron commer-
cial mounting.
LAMP ASSEMBLY:
4-PAR38MH lamps mounted in
adjustable bezels in a 2 x 2 square
configuration. Each lamp can
accept up to two optical acces-
sories. 380º x 45º locking adjust-
ment. Fixture provides 45º visual
cut-off. Lamp holders retract for
added internal adjustment.
SYSTEM PROTECTION:
Thermal protection provided to
guard against overheating, and
misuse of insulation over and
aroundfixture.Vent holes in hous-
ing provide cooler operation
ELECTRICAL:
Integral Aromat® electronic
metal halide ballsts. Junction box
is UL listed for through branch
wiring, (access above ceiling not
required) for 8 #12, 90°C supply
conductors or 60°C for end of run.
Ballasts and electrical accessible
through ceiling opening via
access door on housing sidewall.
ALL RSA COMBOLIGHT PRODUCTS
ARE MADE IN THE U.S.A. ORDERING EXAMPLE:
=Four Light Square Trimless Recessed PAR38MH - White Interior - 70 watt
lamps - 120 Volt
LV840MHSQ WH 70 120
Cat. # / Description Interior Finish Lamp Wattage Voltage
LV840MHSQ : 4Light Square Recessed Next Generation
Trimless Combo Fixture
PAR38MH
BK - Black 70 - 70 Watt PAR38MH 120 - 120 Volt
(Standard)
WH - White 100 - 100 Watt PAR38MH 277 - 277 Volt
S - Silver
PT - Custom (Specify)
LV840MHSQ
Includes Aromat® Electronic
Metal Halide Ballasts
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
