RSA Lighting QCT-1875BK User manual

Type: Project:
RSA LIGHTING 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: [phone] • www.rsalighting.com
©2004 RSA Lighting All Rights Reserved • Specifications subject to change without notice. QC10
HOT AIMING lamp
adjustment with a regular
phillips screwdriver
4” Adjustable Square Trimless Fixture
w/ Hot Aiming Adjustability
Special Ceiling Housing - 4.75” Height
12V Bi-Pin Base MR16 Lamp 75 Watts Max.
13.25"
7.25"
MDL
8.25"
4.63"
Housing is factory
pre-configured to
accommodate special ceiling
materials and thicknesses
For 277 volt transformer add “277” to end of item #.
Item # Description Finish Voltage / Wattage
QCT-1875WH / QCT-907-SP
QCT-1875BK / QCT-907-SP
QCT-1875S / QCT-907-SP
QCT-1875SS / QCT-907-SP
QCT-1875PM / QCT-907-SP
Quiet Ceiling Series Adjustable Square Trimless Fixture
with Special Ceiling Housing w/ Magnetic Transformer White Black
Silver
Stainless Steel
Primer
12V / 75W Max.
Hanger Bars extend from
14.00” to 25.25” max.
Butterfly Brackets
for commercial
installations
4.00" sq.
1.69" sq.
DESCRIPTION:
Recessed square trimless fixture. 360o
rotational adjustability and 45o(0overtical
to 45otilt) angle adjust with angle locking
mechanism in trim.
ELECTRICAL:
120V input, 12V output. Junction box is
U.L. listed for through branch wiring.
CONSTRUCTION:
Housing and plaster frame: 18 gauge CRS
Trim ring, j-box and hanger assemblies:
16 gauge CRS.
SYSTEM PROTECTION:
Thermal protection provided to guard
against overheating and misuse of insu-
lation over and around fixture. Vent holes
in housing provide cooler operation.
Ball
Detent
Retainers
Angle
Indicators
Lamp holder can accept
up to three (3) optical
accessories
Steel Safety
Cable
Magnetic
Transformer
Perforated flap for secure
drywall installation
Internal rotation
ring with locking
adjustment.
Provides 360º
rotation.
c QCT-1875WH c QCT-1875BK
c QCT-1875S c QCT-1875SS
c QCT-1875PM
w/ QCT-907-SP Housing
45º locking rack & pinion angle
adjustment mechanism
w/ Hot Aiming feature
SPECIAL CEILING HOUSING
• SUITABLE FOR SPECIAL CEILING TYPES SUCH AS WOOD OR MARBLE
• APERTURE RING DEPTH IS FACTORY CONFIGURED TO ACCOMMODATE
SPECIFIED CEILING THICKNESS UP TO 1-1/2"
• HOUSING REQUIRES PRECISE 4.141” DIAMETER CEILING CUT-OUT FOR
ROUND TRIM OR 4.141” X 4.141” CEILING CUT-OUT FOR SQUARE TRIM
REV 062904