RSF Woodburning Fireplaces FDDHE User manual

1) With an “X-ACTO” knife and a metal ruler, cut out the template.
IMPORTANT : do not use scissors.
2) Position the template on the lap at the base left corner of the fireplace then make a drilling
mark. Repeat this operation for the right side. Make sure the distance between the marks is
25 ¾”.
3) After making sure the distance is 25 ¾”, drill two holes with a 5/16” diameter bit.
4) Place the Decorative Hearth Extension, steel facing up, insert both screws into the previ-
ously made holes and tighten them using the supply nuts and washers.
FDDHE
Topaz Decorative Hearth Extension
Installation Instruction

Haut / Top
Gauche / Left
Haut / Top
Droit / Right
Gabarit de perçage/
Template
5/16” Ø

Decorative hearth extension
(FDDHE) TOPAZ
7: (1x) Installation instructions (FD-FHE-inst)
6: (1x) Decorative hearth extension shelf assembly
(1.13.DHE.1.T)
5: (2x) Washer 1/4” (904002)
4: (2x) Nut 1/4 - 20 (906005)
3: (4x) Nut CD 8-32 hex (906004)
2: (4x) Washer 13/64” I.D. x 3/4” O.D. (904014)
1: (1x) Decorative hearth extension wood insert (979014)
Initials
In box (14.15.33):
Wraped in brown paper
Check List