RTA Techni Mobili RTA - 3520 User manual

MODEL RTA-3520
MODEL RTA - 3520
Thanks for purchasing one of our products.
Please read carefully the assembly instructions before the installation.
Please save this manual for future reference.
Complete video assembly demonstration is available at:
www.rtaproducts.com/assembly-videos.htm

RTA-3520
DIMENSIONS
MAXIMUM WEIGHT CAPACITIES
DO NOT exceed this limit
Please use care and good judgement
when placing objects on wood surface
Product Size: 47.5"W x 23"D x 30"H

RTA-3520 P.3
PARTS LIST
23
14
7
568
11
910 12
14 15
13 16
Right
Left
1
10
9
11
12
13
19
19
19
4
5
Left Panel Middle Panel Studs Top Panel
Horizontal Panel Bottom Panel Back Panel Front Base Panel
Side Structure Right Panel Back Structure Main Panel
Keyboard Panel Slider Base Keyboard Slider Support Tubes
X 2
X 2X 4 X 1 SET

RTA-3520 P.4
18 19
17
21
20
22
SCREWS LIST
A
C
D
B
E
6X75 MM
6X35 MM
6X25 MM
6X40 MM
4
4
2
26
PART PARTQTY. QTY.ITEM ITEM
6X12 MM
4X4 MM
3X15 MM
F
G
4
4
24
1
4X14 MM
6X60 MM
4X20 MM
4X35 MM
H
J
K
I
L
12
2
6
2
12
23
Right
Left
Right
Left
Drawer Left Panel Drawer Right Panel Drawer Front Panel Drawer Bottom Panel
Drawer Back Panel Drawer Slider Handle
X 3 X 3 X 3 X 3
X 3
X 3SET
X 3

RTA-3520 P.5

RTA-3520 P.6

RTA-3520 P.7
ASSEMBLY STEPS:
SCREWS
A
12PCS
3X15 MM
SCREWS
5PCS
6X40 MM
B
1
2
Grab all the flat shaped Drawer Sliders (22) and set aside the “L” shaped ones. With the
Left & Middle Panels (1&2) oriented as illustrated, assemble the flat sliders (22) to the
holes on their inside faces. The wheels will be located at the front and facing down.
Join the Front Base Panel (8) to the Bottom Panel (6) by inserting the wood pins of (8) into the
holes of (6) as shown.
Screw the Bolts (B) to the corresponding holes on the inside face of Left Panel (1), then assemble
to it the Horizontal Panel (5), Bottom Panel (6) and Small Front Panel (8) by turning all the
corresponding cam locks.
3
Slide in the Back Panel (7) thru the channels in between
the Horizontal Panel (5) and Bottom Panel (6) as shown.
Make sure the panel fits inside all the channels.
Complete video assembly demonstration is available at:
www.rtaproducts.com/assembly-videos.htm
Detailed instructions on PAGE 5
TOP OF PANEL
12
22 22
Right
Left
3PCS3PCS
68
1
568
7
5
6

RTA-3520 P.8
SCREWS
5PCS
6X40 MM
B
SCREWS
4PCS
6X40 MM
B
SCREWS
4PCS
6X75 MM
C
4
5
67
Screw the Bolts (B) to the corresponding holes on the inside face
of Middle Panel (2), then assemble the Middle Panel (2) to the
Horizontal Panel (5), Bottom Panel (6) and Front Base Panel (8)
by turning all the corresponding cam locks.
Screw the Bolts (B) to the corresponding holes on the inside face
of Top Panel (4), then assemble it to the cabinet by turning the
corresponding cam locks.
Use Screws (C) to assemble the
Right Panel (10) to the Side
Structure (9).
Please refer to PAGE 6 to
troubleshoot this step.
Screw the Studs (3) to
the Side Structure (9).
2
5
68
Detailed instructions on PAGE 5
Detailed instructions on PAGE 5
4
1
2
910
32PCS
9

RTA-3520 P.9
SCREWS
2PCS
6X35 MM
2PCS
6X25 MM
E
D
F
SCREWS
4PCS
6X12 MM
SCREWS
4PCS
4X4 MM
G
SCREWS
8PCS
4X14 MM
H
8
910
11
Use Screws (D & E) to assemble the Back Structure (11) between
the Middle Panel (2) and Side Structure (9).
Use Screws (F) to affix the Slider Bases (14) to
the Main Panel (12).
Use Screws (G) to fix the Keyboard Slider (15) to
the Slider Bases (14) as illustrated. Please note
the position of the tabs on the sliders.
Use Screws (H) to affix the Support Tubes (16) to
the Main Panel (12).
9
11 2
D
E
12
14 4PCS
15 15
14 4PCS
Right Left
12
16 2PCS

RTA-3520 P.10
SCREWS
2PCS
6X60 MM
I
2PCS
6X35 MM
D
SCREWS
4PCS
4X14 MM
H
SCREWS
4PCS
6X40 MM
B
12
13
14 15
12
4
9
13
15
13
L2PCS
I
I
D
D
Place the plastic washer (L) in between
the Top Panel (4) and Support Tubes (16),
and assemble the Main Panel (12) using
screws (D) on the LEFT and (I) on the
RIGHT.
Use Screws (H) to assemble the Keyboard Panel (13)
to the Keyboard Slider (15).
Screw Bolts (B) to the holes on the
inside face of Drawer Front Panel
(19), then assemble the Drawer
Left & Right Panels (17 &18)
as shown by turning the cam locks.
Slide in the Drawer Bottom Panel (20) thru
the channels in between panels (17) & (18)
as shown. Make sure the panel fits inside all
the channels.
Detailed instructions on PAGE 5
20
17
18
17
18
19

RTA-3520 P.11
SCREWS
4PCS
4X35 MM
J
SCREWS
4X20 MM
K
2PCS
16
18 19
19 23
19
19
19
PLEASE REPEAT STEP 14 TO 19 FOR
OTHER TWO DRAWERS
SCREWS
A
4PCS
3X15 MM
17
Assemble the Drawer Back Panel (21) between
the Drawer Left & Right Panels (17&18) using
Screws (J) as shown.
Place the drawer upside-down. Grab the “L” shaped sliders (22)
and assemble them to the drawer using Screws (A), with wheels
facing towards the back of the drawer. Make sure the sliders are
touching the side panels, and that they are not “up in the air”.
Assemble the Handle (23) to the Drawer
Front Panel (19) using Screws (K) as shown.
Carefully insert all the drawers starting from the bottom.
Make sure the wheels from the drawers engage and roll
in the middle of the sliders.
21
17
18
22
22