RTA TVM-060 User manual

Assembly Instructions
Model TVM-060
Components List
Part Description
Part Name Description Specification Figure Qty
T Glass Glass for top shelf
Size:1530*450mm
Thickness:12mm
1
M Glass Glass for middle shelf
Size:1530*425mm
Thickness:6mm
1
B Glass Glass for bottom shelf
Size:1530*450mm
Thickness:6mm
1
T-L Long tube Length:268mm
Diameter:50mm
4
T-S Short tube Length:190mm
Diameter:50mm
4
FT Foot tube
Length:70mm
Diameter:50mm
4
CC-L Chrome Cap(Large)
Diameter:50mm
Thickness:8mm
4
CC-S Chrome Cap (Small) Diameter:28mm
Thickness:8mm 4
I B-1 I bolt (NO.1) Length:35mm
Diameter:10mm
4
I B-2 I bolt (NO.2) Length:50mm
Diameter:10mm
8
I B-3 I bolt (NO.3) Length:45mm
Diameter:6mm 4
T E S Tube end seal
Diameter:50mm
Thickness:2mm 20
CT Cable Tidy Size:472*144mm
Thickness:20mm 1
TOOL-1 5# Tool (Screw IB-1 and IB-2) 1
TOOL-2 3# Tool(Screw IB-3)
1
Pa
g
e 1/3

AssemblyInstructions
Model TVM-060
Pa
g
e 2/3

AssemblyInstructions
ModelTVM-060
Stage 1
Please note stand is best assembled from the bottom up.
1.1 Screw in I bolts (I B-2) to the top of each foot tube (FT).
1.2 Place bottom shelf (B Glass) in position over each foot tube leg with I bolts passing through holes in each
corner of the shelf. Then screw long tubes (T-L) onto each exposed bolt until tight.
1.3Screw in I bolts (I B-2) to the top of each long tube (T-L).
Stage 2
2.1 Place middle shelf (M Glass) in position over each long tube leg with I bolts passing through holes in each
corner of the shelf. Then screw short tubes (T-S) onto I bolts until tight.
2.2 Screw in I bolts (I B-1) to top of short tubes.
2.3 Place top shelf (T Glass) over I bolts resting on short tubes.
2.4 Attach cable tidy to top glass and bottom glass with small chrome cap (CC-S) ---- screw I bolts(I B-3) to
small chrome cap. Then screw I bolts through the cable tidy nuts.
2.5 Secure top glass with large chrome caps (CC-L)
Pa
g
e 3/3