RugDoctor MHH-1 User manual

USER
MANUAL
Model Number
MHH-1 &MSW-1 &MSH-1
Motorized
Hard Floor
Cleaning Tool
For Use with Rug Doctor
Pro® Deep Carpet Cleaner
rugdoctor.com | 1-800-784-3628

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
2
WHAT’S IN THE BOX
We are excited to share one of our innovative products with you. Your Rug Doctor Pro®
Motorized Hard Floor Cleaning Tool (“Tool”) has been designed to add versatility to your
Rug Doctor Pro® Deep Cleaner (“Machine”), allowing you to clean all types of floors in
your home! The product needs to be assembled before you can put it to work.
Wand Hard Surface Cleaning
Tool Head
Cleaning
Solutions
Handle/Hose
THANK YOU FOR BUYING A RUG DOCTOR PRO®
MOTORIZED HARD FLOOR CLEANING TOOL

rugdoctor.com | 1-800-784-3628
3
2 What’s in the Box
4 Important Safety Instructions
6 How to Use
8 Cleaning and Storing
9 Troubleshooting
10 Cleaning Solutions
10 Replacement Parts
11 Warranty Information
Manual Content

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
USER MUST READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS TOOL AND
MACHINE. WHEN USING TOOL AND MACHINE, BASIC PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
›Use the Tool only as described in this manual and use only with manufacturer’s recommended Machine.
›For indoor, household use only.
›DO NOT leave Machine or Tool unattended when plugged in or while powered on. Unplug Tool from the
Machine and unplug Machine from outlet when not in use and before cleaning or servicing.
DO NOT unplug Machine by pulling on the cord. Unplug by pulling on the plug.
›Use only Rug Doctor cleaning products in this Machine. Refer to cleaning solution section of this
manual.
›DO NOT allow this Tool or Machine to be used as a toy. Pay close attention and adult supervision is
necessary when used by or near children. This Tool and Machine is not intended to be used by children
age 12 and under. DO NOT allow children to place their body parts in or near openings or moving parts.
›DO NOT immerse. Use only on sealed hard floor surface (stone, tile, laminate, vinyl), and hard floor
surfaces moistened by the cleaning process. DO NOT use on hard WOOD floors.
›DO NOT use Machine as a vacuum.
›Use caution when using hot tap water. DO NOT boil or microwave water to be used in this Machine.
›DO NOT allow this Machine to run dry. When the solution tank runs out, stop using and follow
directions to refill.
›DO NOT use with damaged cord or plug. If this Tool or Machine is not working as they should, has
been damaged by dropping or has been left outdoors; stop using and call Rug Doctor at 1-800 RUG
DOCTOR (1-800-784-3628) immediately.
›DO NOT pull Machine by the cord, carry by the cord, use the cord as a handle, close a door on the cord,
nor pull the cord around sharp edges or corners.
›DO NOT run Machine over cord. Keep cord away from heated surfaces.
›DO NOT handle the plug or use this Tool or Machine with wet or sweaty hands.
›DO NOT put any objects into the opening. DO NOT use Machine if any opening is blocked.
Keep openings free of dust, lint, hair and anything that could reduce air flow.
›Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
›Turn off all controls before unplugging.
›Use extra care when cleaning on stairs.
›DO NOT use to pick up flammable or combustible liquids or liquids or materials such as gasoline,
or certain paints. DO NOT use in areas where they may be present.
›DO NOT use to pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
›DO NOT place in or pick up anything with this machine that is caustic or toxic material, such as bleach,
ammonia, toilet bowl cleaners or drain cleaners.
›DO NOT clean over floor electrical outlet
WARNING
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

rugdoctor.com | 1-800-784-3628
5
›The use of an extension cord is not recommended. Failure to follow this instruction may expose the
user to the possibility of electric shock, personal loss or injury and/or death.
›DO NOT operate without tanks or in any manner inconsistent with the above warnings or the operating
instructions included in this manual.
›Always turn off Machine before connecting or disconnecting either hose, wand, motorized nozzle or
Tool.
›The attachment hose contains electric wires. DO NOT use or repair a damaged hose. DO NOT use
when the hose is cut or punctured. Avoid picking up sharp objects.
›The attachment hose is to be used only for indoor household cleaning applications using only
Rug Doctor recommended cleaning solutions.
›The attachment hose is to be examined periodically for visible deterioration, such as abrasions,
cracks and splits.
›Always ensure float is properly installed before any wet pick-up operation.
›This product contains chemicals known to the state of California to cause cancer, birth defects
and other reproductive harm.
›Connect to a properly grounded outlet only. See “Grounding Instructions”
WARNING
Improper connection of equipment-grounding conductor can result in the risk
of electric shock. Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with
the machine. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician. This machine is for use on a nominal 120 volt circuit and
has a plug that looks like the plug in Figure A. Make sure that the machine is
connected to an outlet having the same configuration as the plug. No adapter
should be used with this machine.
GROUNDING INSTRUCTIONS
This machine must be grounded. If the machine should malfunction or
break down, grounding provides a path of least resistance for electric
current, to reduce the risk of electric shock. This machine is equipped
with a cord having an equipment grounding conductor and grounding
plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with the local codes and
ordinances.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Grounded
Outlet
Figure A
Grounding Pin

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
6
CLEANING YOUR HARD FLOORS*
How to Use:
IMPORTANT CLEANING TIP: Clean area with a dry vacuum or microfiber mop thoroughly
before deep cleaning. Always test in inconspicuous area with small amount of cleaner before using.
Assemble the Wand
Prepare Machine Connect the Hoses
1
1
1
2
2
2
33
3
Raise the Main Handle
Make sure Handle of the
Pro Deep Cleaner is in the
upright position (as seen to
the right) until handle locks
securely.
Open the
Vacuum Hose Port
Pull the black rubber
flap upward to open
the Vacuum Hose Port.
Check the
Power Button
Make sure that the
Power Button is in
the “off” position.
Connect the
Vacuum Hose
Insert the Vacuum
Hose Cuff into the
Vacuum Hose Port
(marked “A”).
Add Cleaning
Solution
Add Rug Doctor Pro
Hard Floor Cleaning
Solution and warm
water to the Clean
Water Tank as per
the cleaning solution
instructions.
Connect and Assemble the Wand
Align components and connect 2 bars
together to make one Wand.
Connect the Hard Surface Tool
Align components and attach the
Hard Surface Cleaning Tool head to
the lower end of the Wand.
Connect the Wand to the
Handle/Hose
Align components and attach the
Wand to the open end of the
Handle/Hose.
Connect the
Solution Hose
Insert the Solution
Hose into the
Solution Hose Port
(marked “B”).
Fill Line
*Not for Use on Hard Wood Floors

rugdoctor.com | 1-800-784-3628
7
Plug in the Machine
1
2
3
4
5
6
7
Insert plug into a properly
grounded outlet.
Turn on the Machine.
Press the Power Button
located on the Main Handle
to Tool mode. The Tool
Brush will spin when power
is turned on.
Cleaning Your Hard Floors.
Press the Trigger on the
Handle/Hose to apply
solution while making 2
slow wet passes (1 forward
and 1 back) over each area.
Release the Trigger.
Make 2 slow dry passes
(1 forward and 1 back) to
suck up the dirty solution
(do not hold down the
Trigger for this step).
Repeat as necessary.
Wait.
Leave the Machine running
for 15 seconds after cleaning
to allow for all of the dirty
solution to be collected in
the Dirty Water Tank.
Turn O the Machine.
Press the Power Button
located on the Main
Handle to “Off” position.
Position the Tool.
Position the Hard Floor
Cleaning Tool over the area
or stain that you want to
clean.
Now You’re Ready to Clean
CLEANING YOUR HARD FLOORS
How to Use:
CAUTION
Before plugging
Machine in, check
the Power Button
to make sure it
is in the “off”
position.

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
8
CLEANING AND STORING Motorized Hard
Floor CLEANING TOOL
Make sure that the Power Button is in the “off”
position. Unplug Machine power cord from the
power outlet.
Squeeze tabs on sides of
Solution Hose connector
and pull to remove from
Solution Hose Port.
Disconnect the Vacuum
Hose from the Vacuum
Hose Port.
1
3
2
4
Disconnect Vacuum Hose Port
Store Tool
Disconnect Power
Disconnect Solution Hose Port
PLEASE NOTE:
You can disconnect the Hard Floor Cleaning Tool Head and break down the Wand for easy storing.
• Refer to “Cleaning and Storing Machines” in PDC-1 manual for Machine storage Instructions.
Drain excess solution from Handle/
Hose into a drain by pressing Trigger.
Clean and store Handle/Hose, Wand,
and Tool Head until next use. Allow
Tool to dry thoroughly before storing.

rugdoctor.com | 1-800-784-3628
9
TROUBLESHOOTING
The following Troubleshooting guide is provided to help you resolve issues that
may arise with common usage of the Machine.
PROBLEM POSSIBLE REASON HOW TO FIX
NO POWER
›Power cord not plugged in
›Power Button not turned on
›Solution Hose connection is not
installed properly
›Plug power cord into wall outlet.
›Press Power Button to “on” position.
›Disconnect Solution Hose connector at end
of small tubing and wire from the machine by
pinching on sides. Reconnect Solution Hose
connector, making sure it clicks into place.
Check additional connections to ensure they
are connected properly.
NO / LOW SPRAY
›Not pressing Trigger on Handle/Hose
›Clean Water Tank is empty or low
›Clean Water Tank is not locked or
installed correctly
›Valve of Clean Water Tank is clogged
›Solution Hose connector is not
installed properly
›Press and hold Trigger on Handle/Hose.
›Fill Clean Water Tank with hot water and cleaning
solution.
›Lift up Clean Water Tank, and place back into
position. Tank should click into place when
positioned properly.
›Remove valve from the bottom of Clean Water
Tank. Clean with warm soapy water and replace.
›Disconnect plastic Solution Hose connection
at end of small tubing and wire by pinching on
sides. Reconnect Solution Hose connector,
making sure it clicks into place. Check additional
connections to ensure they are connected
properly.
NO / LOW
SUCTION
›Dirty Water Tank Is full
›Dirty Water Tank is not locked or
connected properly
›Vacuum Hose is not installed properly
›Kink or obstruction in Vacuum Hose
›Empty Dirty Water Tank and replace tank when
finished.
›Lift up Dirty Water Tank and place back into
position. Tank should click into place when
positioned properly.
›Disconnect Vacuum Hose. Reconnect Vacuum
Hose, making sure that it is fully inserted into
the Vacuum Hose Port.
›Unkink or remove obstruction in Vacuum Hose.
ROTATING BRUSH
DOESN’T ROTATE
›If something is lodged in the Brush
Roll, brush will stop rotating. Refer
to “How To Change Your Brush Roll”
if further cleaning is needed.
›Turn Machine off and unplug power cord from
outlet. Check that there is nothing stopping the
Brush Roll from rotating. Clean and check that
the Brush Roll Spins freely. When the Brush Roll
is freed, plug in the Machine and turn the
Machine on.
If you are not able to resolve or have other questions call the customer service
hotline at 1-800-784-3628.

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
10
CLEANING solutions
How to Use:
DO NOT USE BOILED OR MICROWAVED WATER IN TANK.
Doing so could result in scalding or burns. Not recommended for use on hard
wood, marble and non-sealed hard floors. Doing so could damage floors.
HOW TO CHANGE YOUR BRUSH ROLL
Ensure that Power Button is in off position and Power Cord is unplugged before cleaning or replacing Brush Roll.
1 4
2 5
3 6
Disconnect Hard
Surface Cleaning Tool
Head from the wand.
Remove old Brush Roll
and replace with new
Brush Roll.
Turn Tool Head
upside down.
(Brush Roll facing ceiling)
Replace Brush Roll Cover
and screw to lock Brush
Roll back into place.
Remove one screw
and Brush Roll Cover.
Reconnect Hard
Surface Cleaning Tool
Head to the wand.
ADDITIONAL TOOLS
AVAILABLE FOR PURCHASE
GROUT TOOL UPHOLSTERY TOOL
REPLACEMENT PARTS
Replacement parts are available for your
RUG DOCTOR PRO® MOTORIZED HARD
FLOOR CLEANING TOOL.
Call “Rug Doctor Customer Service”
1-800-RUGDOCT (1-800-784-3628)
or visit www.rugdoctor.com
RUG DOCTOR PRO® HARD FLOOR CLEANING SOLUTION is scientifically
formulated to clean, refresh and renew sealed hard floors by breaking down dirt,
grime and sticky build-up. It is safe to use on sealed hard floors such as stone, tile,
laminate, and vinyl. Not recommended for use on Hard Wood Floors. Always use
Rug Doctor Pro® Hard Floor Cleaning Solution in your Machine. Other formulas may harm
your Machine and void warranty.

rugdoctor.com | 1-800-784-3628
11
Warranty Information
Two (2) Year Limited Consumer Warranty
Rug Doctor gives the original purchaser, who retains proof of purchase, from Rug Doctor or an authorized Rug
Doctor dealer, this limited warranty (“Warranty”) for your Rug Doctor Pro® Motorized Hard Floor Cleaning Tool
acquired for normal household use (commercial or rental use is excluded). You are responsible to notify Rug
Doctor within thirty (30) days of original purchase if any parts or components are missing, or if you experience
any issue, with your Rug Doctor Pro® Motorized Hard Floor Cleaning Tool.
What Does This Warranty Cover/How Long Does The Warranty Last
Rug Doctor will, for the original purchaser, with proof of purchase, repair or replace (with new or remanufactured
components or products), including labor, any part that is defective in material or workmanship within two (2)
years of purchase. This warranty applies to Tools used for normal household purposes only.
What The Warranty DOES NOT Cover
The following exclusions apply to the machine/tool and part(s) failures due to: 1) normal wear and tear;
2) machine/tool alterations and 3) abuse or misuse of the machine/tool, including use not in accordance with this
“User Manual”. This warranty does not provide for a refund of the purchase price. For best operating efficiency
and cleaning, use of only Rug Doctor products is recommended. Use of the machine/tool for rental voids the
warranty and is not permitted under Federal Law (see “Unauthorized Use” statement below). Commercial use
is excluded under this warranty except as set forth in the “ONE YEAR LIMITED COMMERCIAL WARRANTY”
below. Rug Doctor is not liable for any consequential or incidental damages of any nature involving the purchase/
use of your carpet cleaning machine/tool. In no event shall Rug Doctor’s liability exceed the purchase price of
the machine. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
Expenses
If a Tool is returned to a repair center for repair within thirty (30) days of original purchase, Rug Doctor will pay
the freight charges both to a repair center and back to you. After that, you will be required to ship the Tool to a
Rug Doctor repair center should additional repairs be required after the initial thirty (30) day warranty period.
You will be responsible to pay any freight charges for shipment to the repair center for repairs occurring after
the initial thirty (30) days. Rug Doctor will pay the freight charges back to you.
How State Laws Apply
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
How Do I Get Service Under This Warranty?
TO OBTAIN WARRANTY ASSISTANCE, please call 1-800 RUG DOCTOR (1-800-784-3628) (8 am to 5 pm
CST) or e-mail [e-mail]. Rug Doctor will need the following information to assist
you: your name, address and telephone number, product model and serial number, proof of purchase showing
date and place of purchase. Please explain the nature of the problem. Rug Doctor will review all the facts
involved and advise you as to recommended procedure. We recommend you keep the original carton and
packing materials.

MOTORIZED HARD FLOOR CLEANING TOOL | User Manual
12
Unauthorized Use
Use of this carpet cleaning Tool with Rug Doctor trademarks for rental purposes is UNAUTHORIZED and is in
violation of U.S.C Section 1114(I) and 15 U.S.C. Section 1125 (a).
One (1) Year Limited Commercial Warranty
All of the warranty terms as expressed above shall apply in all respects, for the original United States purchaser
of a Rug Doctor Pro® Motorized Hard Floor Cleaning Tool, who purchases the machine commercially (not in
household use), except that the limited warranty period for the defects in the material or workmanship as
well as housing parts for commercial use machines shall be one (1) year. You can register your Rug Doctor
Pro® Deep Motorized Hard Floor Cleaning Tool at www.rugdoctor.com.
Note: YOU MUST KEEP YOUR ORIGINAL SALES RECEIPT. IT PROVIDES PROOF OF DATE OF
PURCHASE IN THE EVENT OF WARRANTY CLAIM.
rugdoctor.com | 1-800-784-3628
Model Number MHH-1 &MSW-1 &MSH-1
Manual Part Number: 73497

MANUAL DEL
USUARIO
Número de Modelo
MHH-1 &MSW-1 &MSH-1
Herramienta
motorizada de
limpieza para
pisos duros
Para usar con el limpiador profundo
de alfombras de Rug Doctor Pro®
rugdoctor.com | 1-800-784-3628

HERRAMIENTA MOTORIZADA DE LIMPIEZA PARA PISOS DUROS | Manual Del Usuario
2
¿QUÉ INCLUYE LA CAJA?
Estamos contentos de compartir uno de nuestros innovadores productos con usted. Su
herramienta motorizada de limpieza para pisos duros de Rug Doctor Pro® (“herramienta”)
ha sido diseñada para añadir versatilidad a su Deep Cleaner de Rug Doctor Pro®
(“máquina”) y le permite limpiar todos los tipos de pisos en su hogar. Debe armar el
producto antes de ponerlo en funcionamiento.
Varilla
Cabezal
de la herramienta
de limpieza para
superficies duras
Soluciones de
limpieza
Manija/
manguera
GRACIAS POR COMPRAR LA HERRAMIENTA
MOTORIZADA DE LIMPIEZA PARA PISOS
DUROS DE RUG DOCTOR PRO®

rugdoctor.com | 1-800-784-3628
3
2 ¿Qué Incluye La Caja?
4 Instrucciones de Seguridad Importantes
6 Modo de Uso
8 Limpieza y Almacenamiento
9 Solución de Problemas
10 Soluciones de Limpieza
10 Piezas de Reemplazo
11 Información de Garantía
Contenido del manual

HERRAMIENTA MOTORIZADA DE LIMPIEZA PARA PISOS DUROS | Manual Del Usuario
4
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
EL USUARIO DEBE LEER Y ENTENDER TODAS LAS INSTRUCCIONES ANTES DE USAR ESTA
HERRAMIENTA Y MÁQUINA. AL USAR LA HERRAMIENTA Y LA MÁQUINA, SIEMPRE DEBEN
TOMARSE PRECAUCIONES BÁSICAS, ENTRE LAS QUE SE INCLUYEN LAS SIGUIENTES:
›Use la herramienta solo como se describe en este manual y solo con los accesorios de la máquina
recomendados por los fabricadores.
›Solo para uso doméstico en interiores.
›No deje la máquina o la herramienta sin supervisión mientras esté enchufada o mientras esté encendida.
Desenchufe la herramienta de la máquina y la máquina del tomacorriente cuando no esté en uso y
antes de limpiarla o darle mantenimiento. No desenchufe la maquina tirando del cable. Desenchufe
tirando del enchufe.
›Utilice solo productos de limpieza Rug Doctor con esta máquina. Consulte la sección de solución de
limpieza de este manual.
›No permita que la herramienta o máquina sea utilizada como juguete. Es necesaria la supervisión de un
adulto con suma atención cuando el aparato es utilizado por niños o cerca de estos. Esta herramienta
y máquina no está destinada para ser utilizada por niños menores de 12 años. No permita que los niños
coloquen partes de su cuerpo en las aberturas y piezas móviles o cerca de ellas.
›No la sumerja. Utilice solo en superficies de piso duro selladas (piedra, azulejo, pisos laminados y con
vinilos) y superficies de piso duro humedecidas por el proceso de limpieza. No utilice en pisos de
madera DURA.
›No utilice la máquina como aspiradora.
›Tenga cuidado cuando utilice agua caliente del grifo. No hierva ni caliente en el microondas el agua que
se utilizará en la máquina.
›No permita que la máquina funcione en seco. Cuando el tanque de solución se agote, deje de usar la
máquina y siga las instrucciones para rellenarlo.
›No utilice la máquina con cables ni enchufes dañados. Si la herramienta o máquina no funciona como
debería, se ha dañado por un caída o se dejó al aire libre, deje de usarla y llame a Rug Doctor al 1-800
RUG DOCTOR (1-800-784-3268) de inmediato.
›No mueva ni transporte la máquina utilizando el cable, no use el cable a modo de manija, no cierre
puertas encima del cable ni tire del cable cuando esté cerca de bordes o esquinas filosos.
›No desplace la máquina sobre el cable. Mantenga el cable lejos de superficies calientes.
›No manipule el enchufe ni use esta máquina o herramienta con las manos húmedas o sudorosas.
›No coloque ningún objeto en la abertura. No utilice la máquina si alguna abertura está bloqueada.
Mantenga las aberturas libres de polvo, pelusas, cabellos y todo lo que pueda reducir el flujo de aire.
›Mantenga el cabello, la ropa suelta, los dedos y todas las partes del cuerpo lejos de las aberturas y de
las partes móviles.
›Apague todos los controles antes de desenchufarla.
›Tenga aún más cuidado al limpiar en las escaleras.
›No utilice el aparato para aspirar líquidos o materiales inflamables o combustibles, como gasolina, o
determinadas pinturas. No lo utilice en áreas donde puedan estar presentes.
›No use el aparato para aspirar objetos que se estén quemando o que estén despidiendo humo, como
cigarrillos, fósforos o cenizas calientes.
ADVERTENCIA
PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA,
LESIONES A PERSONAS O DAÑOS A LA PROPIEDAD:

rugdoctor.com | 1-800-784-3628
5
›No coloque la máquina sobre materiales cáusticos o tóxicos, como blanqueadores, amoníaco,
limpiador de inodoros y limpiadores de drenajes, ni la utilice para aspirar estos materiales.
›No limpie sobre tomacorrientes eléctricos en el piso.
›No se recomienda el uso de un cable de extensión. No seguir las instrucciones precedentes puede
exponer al usuario a la posibilidad de descargas eléctricas, pérdidas o lesiones personales y/o la
muerte.
›No opere sin tanques o de manera incompatible con las advertencias anteriores o con las instrucciones
de operación incluidas en este manual.
›Apague siempre esta máquina antes de conectar o desconectar la manguera, las varillas o la boquilla
motorizada o la herramienta.
›La manguera de los accesorios contiene cables eléctricos. No utilice ni repare una manguera dañada.
No la utilice cuando la manguera esté cortada o perforada. Evite recoger objetos afilados.
›La manguera de los accesorios debe utilizarse solamente para aplicaciones de limpieza doméstica
utilizando solamente las soluciones de limpieza recomendadas por Rug Doctor.
›La manguera del accesorio debe ser examinada periódicamente buscando deterioro visible, como
abrasiones, grietas y separaciones.
›Asegúrese siempre de que el flotador esté instalado correctamente antes de cualquier operación de
recogida en húmedo.
›Este producto contiene químicos que son conocidos en el Estado de California como causantes de
cáncer, defectos de nacimiento y otros daños reproductivos.
›Conéctela solamente a un tomacorriente conectado a tierra en forma apropiada. Consulte las
“Instrucciones para la conexión a tierra”.
ADVERT
La conexión incorrecta del conductor del equipo de conexión a tierra puede provocar
riesgo de descarga eléctrica. Consulte a un electricista calificado si tiene dudas respecto
a si el tomacorriente está conectado a tierra en forma apropiada. No modifique el
enchufe proporcionado con la máquina. Si el enchufe no entra en el tomacorriente,
haga que un electricista calificado le instale un tomacorriente adecuado. Esta máquina
está preparada para su uso en un circuito con una capacidad nominal de 120 voltios y
tiene un enchufe que se parece al enchufe que se ilustra en la Figura A. Asegúrese de
que la máquina esté conectada a un tomacorriente que tenga la misma configuración
que el enchufe. No se debe utilizar ningún adaptador con esta máquina.
INSTRUCCIONES PARA LA CONEXIÓN A TIERRA
Esta máquina debe conectarse a un tomacorriente conectado a tierra. Si
presentara desperfectos o se rompiera, la conexión a tierra proporciona
un paso de menor resistencia para la corriente eléctrica a fin de reducir
el riesgo de descarga eléctrica. Esta máquina está equipada con un cable
que tiene un conductor del equipo de conexión a tierra y un enchufe de
conexión a tierra. El enchufe debe estar conectado a un tomacorriente
adecuado que esté instalado y conectado a tierra en forma apropiada de
acuerdo con todos los códigos y ordenanzas locales.
GUARDE ESTAS INSTRUCCIONES
Tomacorriente
con conexión a
tierra
Figura A
Clavija de
conexión a tierra

HERRAMIENTA MOTORIZADA DE LIMPIEZA PARA PISOS DUROS | Manual Del Usuario
6
LIMPIEZA DE PISOS DUROS*
Cómo Utilizar:
CONSEJO IMPORTANTE DE LIMPIEZA: Aspire/limpie el área con una aspiradora seca o un trapo
de microfibra antes de limpiar en profundidad. Siempre pruebe en un área poco visible con una pequeña cantidad de
limpiador antes de usar.
Ensamblar la Varilla
Preparación de la Máquina Conectar Las Mangueras
1
1
1
2
2
2
33
3
Levante la Manija Principal
Asegúrese de que la manija de la
Pro Deep Cleaner esté en posición
de pie (como se ve en la figura)
hasta que la manija trabe por
completo.
Abra el Puerto de la
Manguera de Vacío
Tire la solapa de goma
negra hacia arriba
para abrir el puerto de
la manguera de vacío.
Verifique el Botón de
Encendido
Asegúrese de que el
botón de encendido
esté en la posición de
“off” (apagado).
Conecte la Manguera
de Vacío
Inserte la manguera de
vacío en el puerto de
la manguera de vacío
(marcado como “A”).
Añada solución de limpieza
Añada solución de limpieza
de pisos duros de Rug Doctor
Pro y agua tibia al tanque
de agua limpia acorde a las
instrucciones de la solución
de limpieza.
Conecte y Ensamble la Varilla
Alinee los componentes y conecte las
2 barras para formar una sola varilla.
Conecte la Herramienta para
Superficies Duras
Alinee los componentes y conecte el
cabezal de la herramienta de limpieza
para pisos duros en el extremo
inferior de la varilla.
Conecte la Varilla a la
Manija/Manguera
Alinee los componentes y adjunte
la varilla en el extremo abierto de la
manija/manguera.
Conecte la Manguera
de Solución
Inserte la manguera de
solución en el puerto de
la manguera de solución
(marcado como “B”).
Fill Line
*No Utilizar en Pisos De Madera Dura

rugdoctor.com | 1-800-784-3628
7
Enchufe la Máquina
1
2
3
4
5
6
7
Inserte el enchufe en un
tomacorriente debidamente
conectado a tierra.
Encienda la Máquina.
Presione el botón de
encendido ubicado en la
manija principal y seleccione
el modo de herramienta. El
cepillo de la herramienta
girará cuando se prende.
Limpieza de Pisos Duros.
Presione el botón de la manija/
manguera para aplicar la
solución mientras hace 2 pasadas
húmedas lentas (1 hacia adelante
y 1 hacia atrás) sobre cada área
Suelte el botón
Haga 2 pasadas lentas en seco
(1 hacia adelante y 1 hacia atrás)
para aspirar la solución sucia (no
mantenga presionado el botón
en este paso)
Repita la cantidad de veces
necesaria
Espere.
Deje encendida la máquina
durante 15 segundos
después de la limpieza
para permitir que toda la
solución sucia sea recogida
en el tanque para agua
sucia.
Apague la Máquina.
Presione el botón de
encendido ubicado en
la manija principal y
colóquelo en la posición
de “off” (apagado).
Coloque la Herramienta en
Posición.
Coloque la herramienta de
limpieza para pisos duros
sobre el área o mancha que
quiera limpiar.
Ahora Usted Está Listo
Para Limpiar.
LIMPIEZA DE PISOS DUROS
Cómo Utilizar:
PRECAUCIÓN
Antes de enchufar
la máquina,
revise el botón
de encendido
para asegurarse
de que está en la
posición de “off”
(apagado).

HERRAMIENTA MOTORIZADA DE LIMPIEZA PARA PISOS DUROS | Manual Del Usuario
8
LIMPIEZA Y ALMACENAMIENTO DE LA HERRAMIENTA
DE LIMPIEZA PARA PISOS DUROS
Asegúrese de que el botón de encendido esté en
la posición de “off” (apagado). Desenchufe el cable
de la máquina del tomacorriente.
Apriete las lengüetas de
los lados del conector de
la manguera de solución
y tire para quitarlo del
puerto de la manguera
de solución.
Desconecte la manguera
de vacío del puerto de la
manguera de vacío.
1
3
2
4
Desconecte el Puerto de la
Manguera de Vacío
Almacene la Herramienta
Desconéctela de la Corriente
Desconecte el Puerto de
la Manguera de Solución
TENGA EN CUENTA QUE:
Puede desconectar el cabezal de la herramienta para pisos duros y separar la varilla para guardarla más fácil.
• Consulte “Limpieza y almacenaje de máquinas” en el manual PDC-1 para ver las instrucciones de almacenaje
de máquinas.
Seque la solución excedente de la
manija/manguera en un drenaje
presionando el botón. Limpie y
almacene la manija/manguera, varilla
y el cabezal de la herramienta hasta el
próximo uso. Deje que la herramienta
se seque bien antes de guardarla.