Russell Hobbs 28040-56 User manual

r
I www.russellhobbs.com
28040-56
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE

2
H B
k
l
n
i
f
g
j
MAX
e
m
o
h
A

3
h
Bh
C
h
Dh
E
h
Fh
G
MAX
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE

4
Read the instructions, keep them safe, pass them on if you pass the iron on.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been supervised/instructed and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be done by children
unless they are older than 8 and supervised. Use and store the appliance
out of reach of children under 8 years.
Between uses, the steamer must be rested on a stable, level, heat-resistant
surface.
Don’t leave the appliance unattended while plugged in, or while it’s
resting between uses.
Unplug the appliance before lling, before cleaning, and after use.
Don’t operate the appliance if it’s dropped or damaged, or if it
malfunctions or leaks.
If the cable is damaged, return the appliance in order to avoid a hazard.
¬ The surfaces of the appliance will get hot during use.
b Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
• Never use anything except water to ll or clean the appliance.
• Never steam clothing that is being worn.
• Never aim steam directly at people, animals or plants. Steam is hot and can cause serious burns and
scalds if used without care.
• Never hold the steam head downwards while at rest, or tilt it backwards as this may cause hot water
to be discharged and possible injury.
• Ensure the appliance is switched o and cooled down before tting or removing attachments.
• Don’t use the appliance for any purpose other than those described in these instructions.
HOUSEHOLD USE ONLY
PARTS
1. Ceramic heating plate
2. Steam trigger lock
3. Steam trigger
4. Handle
5. Water tank
6. Power button
7. Lint attachment
8. Delicate fabric attachment
9. Upholstery attachment
10. Scent infuser attachment
BEFORE USING FOR THE FIRST TIME
• Remove labels, stickers and packaging from the appliance.

5
IMPORTANT INFORMATION
• For best performance, we recommend using distilled, puried or ltered water in your steamer. Tap
water contains minerals that can build up inside your steamer over time and reduce its eciency or
even cause damage.
• Never use perfumes, oils or other additives.
• Always check the garment’s care label before steaming, and always test fabrics for colourfastness in
an inconspicuous area. Steamers are not recommended for use on leather, suede, vinyl, plastic, or
other materials that are sensitive to steam.
• During use the steamer and accessories will become HOT. Never try to t or remove attachments
while still hot.
• After preheating, prime the water pump by holding the steam trigger until steam forms.
• It is normal to feel or hear the water pump inside the device. It may become louder when the water
level in the tank is low. Check and rell the tank when required.
• Small amounts of dripping might occur during use. If excessive, your steamer needs time to get back
up to full temperature. Just allow the steamer a minute to reheat.
• Wearing clothes immediately after ironing or steaming can actually create wrinkles. Always allow the
clothing to cool for about 5 minutes before wearing.
ATTACHMENTS
Your steamer has three attachments:
Lint attachment Use on garments labelled kl that allow the use of steam.
Tip: The pad on the attachment helps remove lint, hair, and animal fur.
Delicate fabric attachment
with scent infuser Use on garments labelled jthat allow the use of steam.
Tip: For items with printing/embellishment, turn the garment inside out to
avoid damage to sensitive areas.
Use the scent infuser to infuse your favourite perfumes onto your fabrics.
Upholstery attachment Use to sanitise and refresh bedding, mattresses, curtains, plush toys,
furniture, and hard surfaces (such as worktops or desks that are not heat
sensitive).
Always test for colourfastness and heat sensitivity on an inconspicuous area.
Fitting/Removing (Fig. A)
1. Make sure that the steamer and attachment are cool.
2. Hook the top of the attachment over the top edge of the steamer. Click the bottom edge into place.
Make sure it is fully tted and not loose or it may detach itself during use.
3. Remove the attachment using the tab. When removing the attachment, watch out for condensation
that may have built up during use.
FILLING
1. Place the steamer on its base on a stable surface.
2. Pull out the removable water tank (Fig. B)
3. Gently open the rubber cover at the top of the tank.
4. Fill until the water reaches the “MAX” level mark on the side of the tank (Fig. C). Do not overll. Close
the rubber cover securely.
5. Dry o any excess water from the tank then ret it into the base until it clicks.
• To rell at any time during use, turn the steamer o by pressing the power button until the blue
indicator light goes out, unplug from outlet, and follow the above procedure.
• After relling, allow to reheat for 45 seconds and then prime the pump by holding the steam trigger
until steam forms.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
UA
AE