Rutland County STORYTELLER User manual

Assembly Instructions
The storyteller chair
1
Before you commence the assembly process we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the assembly process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
1 x Chair back
1 x Seat panel
1 x Lower frame
2 x Posts
2 x Arms
6 x 60mm, 8 x 70mm M8 Coach screws
4 x 75mm screws
10mm socket or spanner
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
The Storyteller chair

The storyteller chair
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Lay the Chair back on a clean, flat surface taking care
not to damage it.
Step 3
Step 4
Align the Seat panel centrally on the Chair back as
shown so that the fixing holes align with those in the
Chair back and secure into place with 3 x 60mm
coach screws.
Now align the Lower frame on the Chair back as
shown and after aligning the fixing holes as in Step
3....

The storyteller chair
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
3
Step 5
Step 6
...fix into place using 3 x 60mm coach screws.
Using an assistant, lift the back assembly into a
vertical position as shown.
Step 7
Step 8
Take one of the posts and roughly align it with pre-
drilled holes in the Seat panel and Lower frame...
...before moving to the inside edge and align the
bottom pencil line as indicated...

The storyteller chair
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
4
Step 9
Step 10
...and top pencil mark....
...before securing in place with a 70mm coach screw
at the top and bottom.
Step 11
Step 12
Repeat Steps 7 to 10 for the other post.
Take one of the Arms, place it so that the underside is
flat on top of the Post and the square end is butted
against the Chair back. Now align its outer edge with
the edge of the Chair back and the Post.

The storyteller chair
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
5
Step 13
Step 14
Drive 2 x 75mm screws through the pre-drilled holes
in the arms into the top of the Post.
Adjust the Arm vertically so that the pre-drilled holes
in the Chair back align with those in the Arm ends
before securing into place with 2 x 70mm coach
screws as shown.
Step 15
Repeat Steps 12 to 14 for the remaining Arm. Your
Storyteller chair is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any
further assistance or have any questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk