3
1
Screw the PCS-Boom Connector on to the male
3/8”thread of the boom pole, in a clockwise rotation/
direction - to the desired position.
PCS-Boom Connector
Quick Start Guide
PCS-Boom Connector
4
To tighten connection, use a screw driver (not supplied),
and insert this through the circular hole in the tip, as shown.
Turn clockwise to tighten rmly (do not over-tighten).
5
6
Screw the PCS‘tip’into the female 3/8”thread of your
windshield, shock mount, or other accessory that you
would like to use with your PCS-Boom Connector.
To attach the two components, simply line up the tip
with the Connector and push the tip in to lock it.
You will hear a‘click’as it locks together!
Use the included hex/Allen key to tighten the two small
locking screws on the PCS-Boom Connector.This will lock
it on to the 3/8”boom pole thread, without damaging it.
To release, pull down the grey outer collar on the
PCS-Boom Connector, as shown.
Quick Start Guide
PCS-Boom Connector (185801)
Thank you for choosing the
Rycote PCS-Boom Connector!
This guide provides you with
the basics to get you started.
Full details about this product are available on
our website: rycote.com/microphone-windshield-
shock-mount/pcs-boom-range/
Optional attachments
The following attachments are available
for the PCS-Boom Connector:
• Pair of 3/8”Tips
for PCS-Boom Connector (185805)
• Classic Adaptor
for PCS-Boom Connector (185807)
• Cyclone Adaptor
for PCS-Boom Connector (185808)
2
31
Screw the PCS-Boom Connector on to the male
3/8”thread of the boom pole, in a clockwise rotation/
direction - to the desired position.
PCS-Boom Connector
Quick Start Guide
PCS-Boom Connector
4
To tighten connection, use a screw driver (not supplied),
and insert this through the circular hole in the tip, as shown.
Turn clockwise to tighten rmly (do not over-tighten).
5
6
Screw the PCS‘tip’into the female 3/8”thread of your
windshield, shock mount, or other accessory that you
would like to use with your PCS-Boom Connector.
To attach the two components, simply line up the tip
with the Connector and push the tip in to lock it.
You will hear a‘click’as it locks together!
Use the included hex/Allen key to tighten the two small
locking screws on the PCS-Boom Connector.This will lock
it on to the 3/8”boom pole thread, without damaging it.
To release, pull down the grey outer collar on the
PCS-Boom Connector, as shown.
Quick Start Guide
PCS-Boom Connector (185801)
Thank you for choosing the
Rycote PCS-Boom Connector!
This guide provides you with
the basics to get you started.
Full details about this product are available on
our website: rycote.com/microphone-windshield-
shock-mount/pcs-boom-range/
Optional attachments
The following attachments are available
for the PCS-Boom Connector:
• Pair of 3/8”Tips
for PCS-Boom Connector (185805)
• Classic Adaptor
for PCS-Boom Connector (185807)
• Cyclone Adaptor
for PCS-Boom Connector (185808)
