SAFAVIEH COUTURE CTL1026A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this
plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Model# CTL1026A /CTL1026B
Product Dimensions: 15 "W X15 "D X26.5 "H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use
of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Finial 1X D Harp 1X
B Shade 1X E Socket 1X
C Bulb 1X F Lamp base 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
NOTE:PLEASE USE DIMMABLE TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12-WATTTHERE IS LED 9-WATT BULB IN THE BOX
Step1: Please take base(F)on the table.Put the shade(B) on the harp(D).turn the harf in the
horn put the shade on the harp(D), then.Insert the bulb(C) into the socket(B).then tighten
the finial (A) into the harp (D).
Step2: Put the light on a level surface to check if everything is stable.
2/2