Safavieh Furniture Dejana FOX8506A User manual

CARE AND MAINTENANC
E
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.
Test the cleaning method on a hidden area before using them over the entire area .
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of thi
s
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
*
This item may require periodic tightening
Model# FOX8506
A
Product Dimensions: 22.4*27.6*41.3~45.1
"
PIECE QUANTITY
(1) 1X
(2) 1X
(3)
1X(R L)
Seat Cushion
This
item
may
require
periodic
tightening
Back Cushion
Part List and Hardware List
Arms (R & L)
DESCRIPTION PICTURE
(3)
1X(R
,
L)
(4) 1X
(5) 1X
(6) 1X
(7) 1X
(8)
5X
Star Base
Caster
Control Mechanism
Cylinder Column
Bellows
Arms
(R
&
L)
(8)
5X
(9) 4X
(10) 4X
(11) 4X
(12) 8X
(13)
4X
Washer
Screw Cove
r
Medium Screw
Long Screw
Caster
Short Screw
(13)
4X
(14) 1X
Small Allen Wrench
Screw
Cover

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Step 1 Step 2 Step 3
Insert five Casters (8) into Star Base (7), push
hard until you feel or hear the Caster(8) snap
into place. Insert the LARGE end of Cylinder
Column (5) with the bellow(6) into the Star Base
(7) and carefully press downward with moderate
force until it is fully seated.
Attach Control Mechanism (4) to Seat Assembly (2) with
the arrow towards the front of the chair, using four
Washers (12) and four Short Screws(9).
Assemble the Seat(2) to the Back(1)
together,
using four Medium Screws(10) and four
Washers(12).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH

Step 4 Step 5 Step 6
Now insert the small end of Cylinder Column (5)
into Control Mechanism (4) and carefully press
downward with moderate force until it is fully
seated.
Connect the armrests(3) to seat(2) by using four Long
Screws(11) and four Screw Covers.
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE
FULLY TIGHTENED BEFORE USING CHAIR