Safavieh Furniture Kyler FOX8511 User manual

Model# FOX8511
Product Dimensions: 22.2"W*21.3"D*34.6~39.4"H
PIECE QUANTITY
(1) 1X
(2)
1X
(3)
1X
(4)
1X
(5)
5X
(6)
4X
(7)
4X
(8)
1X
Washer
Allen Wrench
Caster
Screw
Star Base
Control Mechanism
Cylinder Column
Part List and Hardware List
DESCRIPTION
PICTURE
Back Cushion+Seat Cushion
CARE AND MAINTENANCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.
Test the cleaning method on a hidden area before using them over the entire area .
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening

Step 1 Step 2 Step 3
Step 4
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY
TIGHTENED BEFORE USING CHAIR
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Insert five Casters (5) into Star Base (4),
push hard until you feel or hear the Caster(5)
snap into place. Insert the LARGE end of
Cylinder Column (3) with into the Star Base
(4) and carefully press downward with
moderate force until it is fully seated.
Attach Control Mechanism (2) to Seat
Assembly (1) with the arrow towards the
front of the chair, using four Washers (7)
and four Screws(6).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
Now insert the small end of Cylinder Column
(3) into Control Mechanism (2) and carefully
press downward with moderate force until it
is fully seated.