Safavieh Furniture Digby COF2502A User manual

NOTICE
PREPARATIO
* Please make sure that you have all parts indicated and they are in good condition
before you begin assembly of this item. Refer to part list and hardware list below for
guidance.
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly.
*This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail]
NModel # COF2502A
Product Dimensions: 48.3"Wx24.75"Dx16"H
CARE AND MAINTENANC
* Before beginning assembly of product, make sure all parts are present. Compare
parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
E
Wipe spills immediately. Maintain with regular dusting and clean with mild soap and
water, dry thoroughly and do not use a brass cleaner. Adhesive felt pads should
always be used/applied in order to prevent damage to the furniture or surfaces on
which the furniture is placed.
Part List and Hardware List
Piece Description Picture Quantity
A Leg 1 X
B Leg 1 X
C Top 1 X
HW1 Allen Bolt (6x1x10mm) 4 X
HW2 Allen Bolt (6x1x16mm) 4 X
HW3 Allen Key 1 X

Preparation
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
*Tools Required for Assembly (included):Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Step 1
Cross the Leg (A) with Leg (B)
Step 2 - Assemble the legs together using allen bolts (HW1) and the allen key
(HW3). Do not over-tighten
Step 3
Place the top (C) face down and attach the assembled legs. Use
allen key (HW3) to tighten all bolts (HW2)