Safavieh Furniture Edgefield COF7012 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Table top
1x
B
Crossbeam
2x
C
Crossbeam
2x
D
Leg frame
2x
HW1
Hex bolt: 6x0.5x10mm
16x
HW2
Hex bolt: 6x0.5x30mm
6x
HW3
Flat washer: 6mm
22x
HW4
Allen key
1x
NOTICE
*Please makesure that you have all parts indicated and they are in good condition beforeyou beginassemblyof
thisitem.Referto partlistandhardwarelistbelowforguidance.
*Thisitemshouldbe assembledon asoftsurfaceto prevent scratching the finish during assembly.
*Thisitemmayrequire periodictightening.
*If you are havingdifficulty,ourfriendlyCustomer Careteamis always here to help.Pleaseemail
[e-mail]
PREPARATION
*Before beginning assembly of product, makesure all parts are present.Compareparts withpackagecontents list
andhardwarecontentslist.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included): AllenKey
CARE AND MAINTENANCE
Alwaysuse feltpadsunderallarticles to preventdiscolorationor softeningof thelacquer.Plasticand rubberbases
on items can discolor wood.Wipeup spills immediatelyand avoidcommonhazards suchas hotdishes,harsh
solvents and abrasives.Cleaningshould be done withasoft lintfreecottonclothdampenedwihtwateror furniture
polish.
On highly used surfaceswe recommend applyingaqualitypastewaxwhich should be usedon aregular basis to
provide additionalprotectionfromscratchesand spills.Howoften youapplythewax depends on how much wear
the furniturereceives.
Part List and Hardware List
Weight Capacity : 110 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # COF7012
Product Dimension: 44.9Wx25.2Dx16.5H”

Step 1: Put the Flat washer(HW3) on the Hex
bolt(HW1), insert the Crossbeam(B and C) into
Leg frame(D) in order. Insert the Hex bolts into
the mounting position and tighten them by using
Allen key(HW4).
Step 2: Put the Leg frame on Table Top(A), make
the mounting positions aligned.
Step 3: Put the Flat washer(HW3) on Hex bolt(HW2),
insert them into the mounting positions on the Table
top(A), tighten then by using Allen key(HW4).
PREPARATION
*Beforebeginningassembly of product,make sureallparts are present.Compare parts with package contents listand hardware contents list.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included): AllenKey
*If you are havingdifficulty,ourfriendlyCustomerCare team is always here to help.Please [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’