Safavieh Furniture Ellaria LVS9500 User manual

Page1:
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent.Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
F U R N I T U R E
NOTICE
*Please make sure that you have all parts indicated before you begin assambly of this
*This item should be assambled on a soft surface to prevent scratching the finish during
assembly Item# LVS9500
*This item may require periodic tightening Product Dimensions:26.38"Wx30.3"Dx33"H
Part List
PIECE DESCRIPTION PICTURE QUANTITY
A Chair Back with seat 1X
B Cushion 1X
C Pillow 2X
D Back Rail 1X
E Left arm 1X
F Right arm 1X
G Seat frame 1X
Weight Capacity:550lbs
WARNING:DO NOT STAND ON CHAIR

Page2:
Hardware
PIECE DESCRIPTION PICTURE QUANTITY
① Bolt (M8*50MM) 4X
② Screw (M4*40mm) 6X
③ Bolt (M6*35MM) 4X
④ Spring Washer 4X
⑤ Washer 8X
⑥ Allen Key 1X
⑦ Screwdriver 1X
PREPARATION
Before beginning assembly of product,make sure all parts are present.Compare parts with package contents list
If any parts is missing or damage,do not attempt to assemble the product.
Estimated Assembly Time:10 Minutes.

Page3:
1 2
Step1:
Step2:
Put the Left Armrest(E) onto a clean, non-marring surface.
Align the mounting positions of Seat Frame(G) to Left
Align the mounting positions of the Left Armrest(E)
Armrest(E), and attach using Bolts(①), Spring Washers(④)
with Back Rail(D) and attach them using Bolts(③) and
and Washers(⑤) with Allen Key(⑥).
Washers(⑤) with Screwdriver(⑦).
Note: The longer side of Seat Frame(G) should face the Back
Do not fully tighten the Bolts.
Rail(D), otherwise it cannot be assembled.
3
3.1
3.2
Step3：
Place the Right Armrest(F) on a clean, non-marring
surface.
3.1 Attach the Back Rail(D) to Right Armrest(F) using
Bolts(③) and Washers(⑤)with Screwdriver(⑦).
3.2) Align the mounting positions of the Seat Frame(G)
to Right Armrest(F),attach using Bolts(①),
Spring Washers(④) and Washers(⑤) with Allen Key(⑥).
①
④
⑤
E
D
⑤
③
⑦
⑥
E
D
G
Longer side
F
G
D
E
①
④
⑤
⑤
③
⑦

Page4:
Step4:
Place the Chair Back with Seat(A) on a small table,
with the backrest facing down.
Then with the help from an adult assistant, place the
assembled wooden frame onto the Chair Back with
Seat(A),, as seen in the picture.
Align the mounting positions of Seat Frame(G) to the
mounting positions of Chair Back with Seat(A), and
attach using Screws(②) with Screwdriver(⑦).
Step5:
Place the assemled Loveseat, with the backrest
facing up, and install the Screws(①) in the back
using Screwdriver(②) in a sequential manner.
F
Small table or
chair
F
G
E
A
⑦
②
A
D
E
F
G
⑦
②